Age | Commit message (Collapse) | Author |
|
From: Patrick Boettcher <pb@linuxtv.org>
sync from main
Priority: normal
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8.
The driver was created with the help of Technisat. Thank you very much.
Priority: normal
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
changeset 4ecae6da8244 removed algo_control from i2c drivers. However,
on older kernels, a dummy function to implement algo_control is required,
otherwise, an OOPS is generated.
This patch adds a backport for all i2c drivers that defines an
i2c_algorithm, except for cafe_ccic, since OLPC hardware only works
for kernels newer than 2.6.19.
Some of the backported drivers would need also extra changes to work with
older kernels, as specified on v4l/versions.txt. Yet, I decided to add
the backport for those drivers also, since the lack of algo_control doesn't
generate any compilation error, but it is enough to break the driver. So,
better to all for all boards than to allow compiling a kernel backported that
just generates OOPS.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Devin Heitmueller <devin.heitmueller@gmail.com>
Place the s5h1411 into low power mode until first use (to handle the case where
the user plugs in the device and then doesn't use it for a while). On the
Pinnacle 801e, this brings the power usage from 126ma down to 82ma.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
kernel-sync:
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Some recent patches added a few bad whitespaces. Remove that.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: roel kluin <roel.kluin@gmail.com>
- ! has a higher precedence than &
Priority: normal
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Ales Jurik <ajurik@quick.cz>
Signed-off-by: Ales Jurik <ajurik@quick.cz>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
From: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Markus Rechberger <mrechberger@gmail.com>
Priority: normal
Signed-off-by: Markus Rechberger <mrechberger@sundtek.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Devin Heitmueller <devin.heitmueller@gmail.com>
Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this
brings idle power from 123ma down to 84ma).
Priority: normal
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Acked-by: Steven Toth <stoth@linuxtv.org>
|
|
modulation
From: Devin Heitmueller <devin.heitmueller@gmail.com>
If we are already at the desired modulation, there is no need to reconfigure
the demod (at a tuning time cost)
Note that this change revealed that although the datasheet says the demod
starts out in VSB-8 mode, the first tuning was failing consistently unless
we went through the work of setting the registers. So add a field to denote
this case so we always do the enable_frontend call, even if the first tuning
request is for VSB-8.
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Devin Heitmueller <devin.heitmueller@gmail.com>
If you instruct the tuner to change frequencies, it can take up to 2500ms to
get a demod lock. By performing a soft reset after the tuning call (which
is consistent with how the Pinnacle 801e Windows driver behaves), you get
a demod lock inside of 300ms
Priority: normal
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Acked-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
s5h1411: Add the #define for an existing supporting I/F
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
s5h1411: Remove meaningless code
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
Adding a serialmode function to read/and/or/write the register for safety.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
This includes new bit definitions for previously unknown bits.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
This should improve performance.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
s5h1411: Improvements to the default registers
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Igor M. Liplianin <liplianin@me.by>
Remove warning message during cx88-dvb compilation.
Also fixes double underline in function and struct names.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
| drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type
Make the `data' input pointer parameter of cx24116_writeregN() const to
kill the warning.
Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Christophe Thommeret <hftom@free.fr>
Christophe divulged the following:
"Since 8PSK (and higher mod) signals are very likely to have pilot symbols,
pilot_auto should start with pilot_on for 8PSK.
And since QPSK signals are unlikely to have pilot, pilot_auto should start
with pilot_off for QPSK.
Without the patch:
QPSK tuning delay: ~100ms
8PSK tuning delay: ~900ms
with patch:
QPSK tuning delay: ~100ms
8PSK tuning delay: ~100ms
"
This patch does as Cristophe asks. In emulated auto-pilot we
choose pilot-on for tuning PSK_8 and pilot-off for
tuning QPSK.
Priority: normal
Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24123: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
s5h1411: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
s5h1409: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24116: Checkpatch compliance #3
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx22702: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
tda10048: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24116: Checkpatch compliance #2
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24116: Checkpatch compliance
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Steven Toth <stoth@linuxtv.org>
cx24116: Change the default SNR units back to percentage by default.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
I've retained the older percentage code after discussing this with
Darron Broad, but made the ESNO option default.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Steven Toth <stoth@linuxtv.org>
... and cleanup any drivers using them.
I've also removed NBC_QPSK and modified the cx24116 driver to check
the delivery_type also, removing some excess namespace baggage.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
|
|
From: Igor M. Liplianin <liplianin@me.by>
Add support for DvbWorld USB cards with STV0288 demodulator.
Those cards use Earda EDS-1547 tuner.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
|
|
From: Igor M. Liplianin <liplianin@me.by>
Remove NULL pointer in stb6000 driver,
as it raises error for DvbWorld USB card.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
|
|
From: Igor M. Liplianin <liplianin@me.by>
Allow custom inittab for ST STV0288 demodulator,
as it is needed for DvbWorld USB card.
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
|
|
From: Darron Broad <darron@kewl.org>
Add some sanity checking to data input via S2API to the cx24116 demod.
This patch is valid for both s2-mfe and s2.
It was found when testing KAFFEINE with S2API support that invalid
modulation modes amongst other parameters were being delivered to
the demod. In order to debug this sanity checking has been added.
An example session would involve kaffeine setting QAM_AUTO when
querying DVB-T, then later when trying to tune to DVB-S this
cached value would be presented in error.
Priority: normal
Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Darron Broad <darron@kewl.org>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Janne Grunau <janne-dvb@grunau.be>
Priority: high
Signed-off-by: Janne Grunau <janne-dvb@grunau.be>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Antti Palosaari <crope@iki.fi>
- cast firmware data to u8
- remove cpu_to_le16 from switch-case label
Priority: normal
Signed-off-by: Antti Palosaari <crope@iki.fi>
|