summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2006-05-16Fix Pinnacle 300iAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I had broken the mt352 tuning when a non-directly connected PLL was used - uncommon, but this is what is used on the pinnacle card. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-05-13Change the sweeprate for TT C1500 using QAM64Andrew de Quincey
From: Per Dalén <perda@oden.cnwab.se> This patch changes the sweeprate for TT C1500 using QAM64. It has been proven to work using QAM64 at a SRate of 6875 for the two different cable networks. Signed-off-by: Per Dalén <perda@oden.cnwab.se> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-05-13Fix cx24123 diseqcAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rework diseqc support to be more in line with the other demod drivers. Fix Nova-S-Plus/Nova-SE2 diseqc. Cleanup API. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-05-04Fix CI interface on KNC1 DVBT and DVBC cardsAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> These cards need special handling for CI - reinitialising the frontend device when the CI module is reset. Additionally the tda10021 needs to be set into a different transport stream mode when a CI module is present. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-28Add missing pll gate control callsAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I'd missed some of these out, breaking the av7110 tuning. I then checked for more and added them in where necessary. They may not actually be necessary in all these locations, but if not, they'll simply have no effect. Add small delay to stv0299 pll gate control to fix tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-28Support new dvb-ttusb-budget boards with stv0297Andrew de Quincey
From: Thomas Kaiser <linux-dvb AT kaiser-linux.li> Added config switch to stv0297 to control i2c STOP during write behaviour. Update frontend init in dvb-ttusb-budget. Enable i2c STOP on other users of stv0297. Signed-off-by: Thomas Kaiser <linux-dvb AT kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-28Add isl6421 moduleAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Driver for the ISL6421 LNB chip Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-28Convert lnbp21 to a moduleAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert lnbp21.h into a linux kernel module. Fix up previous users to use it. Convert dvb-ttusb-budget to use it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-27dvb: rename dvb_pll_tdvs_tua6034 to dvb_pll_lg_tdvs_h06xfMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-24rename fe_lgh06xf.h to lg_h06xf.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-24merge: http://linuxtv.org/hg/~quincy/v4l-dvb-tuner-refactorMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-22merge: from ~mkrufky/lg-h06xf-pll-fixMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22fix display name for LG TDVS-H06xFMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch fixes the display name for LG TDVS-H06xF tuners in both tuner and dvb-pll modules. Changing the names of the actual pll_desc struct and tuner definitions has been held back until after the dvb tuner refactoring gets merged. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-22fix frequency values in the ranges structures of the LG TDVS H06xF tunersMichael Krufky
From: Rusty Scott <rustys@ieee.org> Frequency range values in the current driver for the LG TDVS H06xF tuners appear to have been a transposing of the 5 in the mid range 160-455 instead of 165-450. This patch corrects the pll programming for these tuners as per the datasheet. Signed-off-by: Rusty Scott <rustys@ieee.org> Signed-off-by: Mac Michaels <wmichaels1@earthlink.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-19Fix tda10046 tuningAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I'd missed the i2c gate ctrl function out of the tda10046, so tuning didn't work Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-19Convert calls from _pllbuf() to _calc_reg()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Johannes Stezenbach suggested this change - definite improvement. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Add support for non-attached tuners to zl10353Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Add no_tuner setting like in mt352. Update to use correct tuner API calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Sort out support for non-attached tuners on mt352Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Make it use set_params/pllbuf as appropriate so it works with dvb_pll_attach()ed tuners. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert dvb-pll to be a refactored tunerAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Remove BUG_ON() and convert to a soft error. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert bsbe1/bsru6 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops call API. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert lgdt330x to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert dib3000* to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert cx24123 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert zl10353 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Use standardised pllbuf call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert nxt6000 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert nxt200x to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Standardise the calls used to retrieve tuner data. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert or51132 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove dvb-pll code - done elsewhere now. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert dvb_dummy_fe to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Make it call the tuner calls - in case someone wants to use it to develop a tuner without a demod. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert cx24110 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Remove unneeded sleep function completely. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert tda10021 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert mt352 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointer from structure. Use standardised pllbuf function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert l64871 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert s5h1420 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert tda1004x to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Remove europa specific hack (moved into appropriate card driver) Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert sp8870 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert sp887x to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert stv0299 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Remove extra exported function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert ves1x93 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert ves1820 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert tda80xx to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert tda8083 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert stv0297 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Remove extra exported pll gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert mt312 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert cx22702 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Remove dvb-pll support - done elsewhere now. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert cx22700 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert at76c651 to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Convert to tuner_ops calls. Remove pll function pointers from structure. Remove unneeded tuner calls. Add i2c gate control function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18create standalone fe_lgh064f headerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> move all pll_set functions for lg-tdvs-h06xf atsc tuners to a standalone header Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-13Tweak bandselect setup fox cx24123Andrew de Quincey
From: Yeasah Pell <yeasah@schwide.net> *) Allow forcing the bandselect value with a module parameter to facilitate determining the correct bandselect frequencies. *) Changes the bandselect frequency thresholds based on experiments with the above parameter in conjunction with the values in the spec. Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-13Various correctness fixes to tuning.Andrew de Quincey
From: Yeasah Pell <yeasah@schwide.net> *) Sets an additional tuner parameter (demodulator sample gain) that wasn't being set before. *) Removes the low symbol rate tuner parameter tweaks in the previous patch -- it appears those tweaks are not necessary with the demodulator sample gain set correctly. *) Cleanup and document the demodulator register initialization sequence. *) Change set_fec routine to disable FEC auto scan when a specific code rate is selected. *) Remove error message when reported FEC is invalid (which happens sometimes when the card has no signal) Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-13Always wait for diseqc queue to become ready before transmitting a diseqc ↵Andrew de Quincey
message From: Yeasah Pell <yeasah@schwide.com> The previous DISEQC code didn't wait, so it was unreliable Signed-off-by: Yeasah Pell <yeasah at schwide.net> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 22:18:31 +0000