summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2006-04-11Fix a tab error in cx14110.c, dprintkMauro Carvalho Chehab
From: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-10lgdt330x: update supported cards list in commentsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - pcHDTV HD5500 ATSC/QAM uses LG DT3303 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-06Add support for FE_GET_FRONTEND to or51132 frontendTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Adds the FE_GET_FRONTEND ioctl to the or51132 frontend. Current modulation is read from the hardware, while frequency is taken from the driver's state. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-04-04Remove a wee bit of cruftTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> A few lines that do nothing in the or51132 frontend, removed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-04Avoid unnecessary firmware re-loads in or51132 frontendTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> As QAM_64, QAM_256, and QAM_AUTO all use the same firmware, switching between these modulations doesn't require a firmware re-load. This also fixes a mishandled error condition, in which the firmware file is loaded into the kernel, the clock mode is changed, but then the firmware upload to the device fails. The modulation change is aborted, but the clock mode would still be changed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-04Fix spellingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> It's "Terrestrial" Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-04-03fix spelling error / typo in commentsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-04-02Clean up some cruft in or51132 frontendMauro Carvalho Chehab
From: Trent Piepho <xyzzy@speakeasy.org> There is some old code in the or51133 firmware loading function that has no effect. Left a comment to in case it helps someone trying to reverse engineer the chip. kernel-sync with V4L/DVB (3708a) Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-30Fix budget-av CAM resetAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. Note: other CA interface implementations (e.g. budget-ci) do not need this since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-03-29Kconfig: Add firmware download comments for or51211 and or51132Michael Krufky
From: Trent Piepho <xyzzy@speakeasy.org> - Added firmware download comments to or51211 and or51132 Kconfig help text. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-17merge from endriss treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-16Kconfig: fix ATSC frontend menu item names by manufacturerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - Corrected typo for NxtWave NXT200X - Added "Oren" manufacturer name to menu items for OR51132 and OR51211 - Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names, This isn't necessary, as these frontends are selected by the card drivers, build configuration (DVB_BT8XX and VIDEO_CX88_DVB). Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-16Moved duplicated code of ALPS BSRU6 tuner to a standalone file.Oliver Endriss
From: Perceval Anichini <perceval.anichini@streamvision.fr> Moved duplicated code of ALPS BSRU6 tuner to a standalone file. Modified av7110 and budget drivers to include the new file. Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-03-15Make a needlessly global function static.Mauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-03Merge from pascoeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-02Merging endriss treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> merge: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-28FE6600 is a Thomson tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - The tuner used in DViCO FusionHDTV DVB-T hybrid is made by Thomson - renamed tuner and dvb_pll structs accordingly Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-28Refactored LNBP21 and BSBE1 supportOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Moved duplicated code to separate files. LNBP21 stuff rewritten from scratch, BSBE1 copied from av7110.c. Modified budget driver to use the new routines. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-02-28DViCO FusionHDTV DVB-T Hybrid and ZL10353-based FusionHDTV DVB-T Plus supportChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Add support for the FE6600 tuner used on the DVB-T Hybrid board. Add support for the Zarlink ZL10353 DVB-T demodulator, which supersedes the MT352, used on the DViCO FusionHDTV DVB-T Hybrid and later model Plus boards. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-02-26fix broken IF-OUT Relay handlingManu Abraham
Thanks to Edgar Toernig Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-26Ignore DiSEqC messages > 6 and < 3Manu Abraham
Thanks to Edgar Toernig Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-02-24fix stv0297 for qam128 on tt c1500 (saa7146)Michael Krufky
From: Mattias Nordstrom <nordstrom@realnode.com> I have a TT C1500 card (saa7146, STV0297) which had problems tuning channels at QAM128 (like the ones in the Finnish HTV / Welho network). A fix which seems to work perfectly so far is to change the delay for QAM128 to the same values as for QAM256 in stv0297_set_frontend(), Signed-off-by: Mattias Nordstrom <nordstrom@realnode.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09at76c651: don't do generic __ilog2 on mipsMichael Krufky
From: Alexey Dobriyan <adobriyan@gmail.com> dvb/frontends/at76c651.c: redefinition of __ilog2 blah blah (akpm: I nuked __ilog2 and used the standard long_log2() instead) We've already removed this module from the kernel, but it is still in the v4l-dvb tree, best to keep it up-to-date. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-09drivers/media/dvb/frontends/mt312.c: cleanupsMichael Krufky
From: Adrian Bunk <bunk@stusta.de> This patch contains the following possible cleanups: - update the Kconfig help to mention the VP310 - merge vp310_attach and mt312_attach into a new vp310_mt312_attach to remove some code duplication Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06From: Adrian Bunk <bunk@stusta.de>Mauro Carvalho Chehab
DVB: remove the at76c651/tda80xx frontends The at76c651 and tda80xx frontends are currently completely unused, IOW their only effect is making the kernel larger for people accitentially enabling them. The current in-kernel drivers differ from the drivers at cvs.tuxbox.org, and re-adding them when parts of the dbox2 project get merged should be trivial. Note: on hg, removed only entries at Kconfig and Makefile. Files will stay at hg repository, if later needed. kernel-sync: kernel patch 3318e Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-06sem2mutex: drivers/media/, #2Mauro Carvalho Chehab
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Kernel-sync from patch 3318b Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-03TDA10046 Driver updateHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> - Set outputs to tristate in sleep mode - Reduce dangerously high firmware download speed with 16MHz xtal - added tda827x configuration with GPIOs low - added comments to stupid looking IIC reads that work around bugs in the tda10046. - some minor updates Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-01Better config table for TD1316 in dvb-pll.cHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> This is just a minor fix. The table entries should use the input frequencies, not the LO frequencies. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-31Updated Avermedia 777 DVB-T to use dvb-pllHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> linux/drivers/media/dvb/frontends/dvb-pll.c linux/drivers/media/dvb/frontends/dvb-pll.h - added td1316 tuner linux/drivers/media/video/saa7134/saa7134-dvb.c - changed tuning code for AverTV 777 to use dvb-pll Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-23rename cb variable names in tuner structures for global consistencyMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-21rename dvb_pll_tbmv30111in to dvb_pll_samsung_tbmvMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-21Kill nxt2002 in favor of the nxt200x moduleMichael Krufky
From: Michael Krufky <mkrufky@m1k.net> - Kill nxt2002 module in favor of nxt200x. - Repair broken nxt2002 support in the nxt200x module. - Make the flexcop driver use nxt200x instead of the nxt2002 module for the Air2PC 2nd generation PCI card. - Remove the nxt2002 module from cvs and kernel build. Signed-off-by: Michael Krufky <mkrufky@m1k.net> CC: Kirk Lapray <kirk.lapray@gmail.com> CC: Taylor Jacob <rtjacob@earthlink.net> CC: Jean-Francois Thibert <jeanfrancois@sagetv.com>
2006-01-15Samsung TBMV30111IN has 6 entriesMichael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-12Trivial changes to make sync with mainstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br> kernel-sync - Trivial patch breaking if (ret=foo()) into two lines on mt312 - Changes url for stradis.com Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-12adding support for knc1 Tv Star dvb-sMichael Krufky
From: Regis Prevot <regis.prevot@anevia.com> - added knc1 tv star dvb-s support with philips tuner sd1878. Signed-off-by: Regis Prevot <regis.prevot@anevia.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-11From: Panagiotis Issaris <takis@issaris.org>Mauro Carvalho Chehab
Conversions from kmalloc+memset to k(z|c)alloc Conversions from kmalloc+memset to k(z|c)alloc. kernel-sync Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-08drivers/media/dvb/frontends/bcm3510.c(258): warning #592: variable "ret" is ↵Patrick Boettcher
used before its value is set From: d binderman <dcb314@hotmail.com> just tried to compile kernel 2.6.15 with the Intel C compiler. It said drivers/media/dvb/frontends/bcm3510.c(258): warning #592: variable "ret" is used before its value is set Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-01-03Add DViCO Bluebird firmware to dvb_get_firmware scriptMichael Krufky
- Add DViCO Bluebird firmware to dvb_get_firmware script, for FusionHDTV USB devices. - Use usb alt setting 0 for EP4 transfer (dvb-t), - Use usb alt setting 7 for EP2 transfer (atsc) - Added comment to lgdt330x.c to indicate support for DViCO FusionHDTV5 USB Gold. Thanks to: Jeff Lee <JeffLee@dvico.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-12-27add firmware instructions for nxt2002 and nxt2004Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-12-27make the firmware dir documentation and comments consistent in the v4l-dvb tree.Michael Krufky
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-12-20correct Thomson DTT 761x frequency rangesMichael Krufky
From: Michael Krufky <mkrufky@m1k.net> - corrected Thomson DTT 7611 tuner programming, based on spec sheet - renamed to Thomson DTT 761x - applies to DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A (DTT 7610 is similar, but slightly different programming) - corrected frequency ranges for analog and digital modes Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-12-19Revert one 64-bit fix and improved other 64-bit fixesHans Verkuil
- Reverted objectionable fix in saa7146_hlp.c - Merged in improved dvb 64-bit fixes from Peter Beutner. Signed-off-by: Peter Beutner <p.beutner@gmx.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-12-14Fix 64-bit compile warningsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-12-08removed unneccessary header.Mauro Carvalho Chehab
kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-08more #if 0 / #if 1 fixes to be in sync with kernelMauro Carvalho Chehab
kernel-sync - more #if 0 / #if 1 fixes to be in sync with kernel Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-08keep #if 0 for existent code when genreating kernel patchesMauro Carvalho Chehab
kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-07cx24123: cleanup timout handlingJohannes Stezenbach
From: Steven Toth <stoth@hauppauge.com> Cleanup timeout handling in cx24123_pll_writereg(), and use a reasonable value for the timeout. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
2005-12-02Adding support for the Hauppauge HVR1100 and HVR1100-LP products.Michael Krufky
From: Steven Toth <stoth@hauppauge.com> - Add support for the Hauppauge HVR1100 and HVR1100-LP products. - Add i2c_gate_ctrl callback function to dvb_frontend_ops struct. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-11-26Whitespaces cleanups.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
Port code for SU1278/SH2 (TUA6100) from pre-refactored code
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 02:04:03 +0000