summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2008-06-14Improve error message at tda1004x_attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-14Improve error messages for tda1004x attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-21 or51132.c: unalignedMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-26merge: http://linuxtv.org/hg/~mkrufky/cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-25s5h1411.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-25s5h1409.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-24au8522.c shouldn't #include "dvb-pll.h"Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-25dib7000p: fix dib7000p_attach when !CONFIG_DVB_DIB7000PMichael Krufky
somebody forgot to to fix this header... Thanks to Ingo Molnar for pointing this out. Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-05-18DVB-PLL: add Samsung DTOS403IH102A tunerAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - add Samsung DTOS403IH102A tuner Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-18TDA10023: make few parameters configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-04-30mt312: Prefix functions only with mt312_, Add zl10313 to kconfig descriptionMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> This patch does some small cleanup to mt312. It changes kconfig description to also list the ZL10313. It does change some strange symbol names to be consistent with module name mt312 and naming of all other functions in there. * vp310_mt312_ops -> mt312_ops * vp310_mt312_attach -> mt312_attach Adds a MODULE_AUTHOR for me Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-28 make itd1000_fre_values[] static constMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> itd1000_fre_values[] can become static const. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-06Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-06DRX depends on HOTPLUG, due to FW_LOADER dependencyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30Fixes compilation for drx397xDMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30 2.6.25-rc5-mm1 specifc div64_u64 fixesMauro Carvalho Chehab
From: Roman Zippel <zippel@linux-m68k.org> Rename a few more div64_u64 which are only in -mm. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30Backport additional Kconfig changes from -gitMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30Use the same name convention for all tuners under common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Auto generated by this script: for i in `find drivers/media/ -name Kconfig`; do cat $i |\ sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\ sed s,VIDEO_TUNER,MEDIA_TUNER,g |\ sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\ sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\ sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\ sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\ sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\ sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\ sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\ sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\ sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\ sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\ sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\ sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\ sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\ sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done for i in `find drivers/media/ -type f`; do cat $i |\ sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\ sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\ sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\ sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\ sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\ sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\ sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\ sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\ sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\ sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\ sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\ sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\ sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\ sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\ sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\ sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30backport tuners move patch from -gitMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to the feedback I got, I've changed the -git patch. This needs to be reflected also at -hg tree. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-28 drivers/media/dvb/frontends/s5h1420.c: printk fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/dvb/frontends/s5h1420.c: In function `s5h1420_setsymbolrate': drivers/media/dvb/frontends/s5h1420.c:484: warning: long long unsigned int format, u64 arg (arg 2) We do not know what type the architecture uses for u64. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26backported kernel changeset cbfa6f2a684e9fb7d6a5025b3893b8f93112683cMauro Carvalho Chehab
From: Tobias Klauser <tklauser@distanz.ch> DVB: Storage class should be before const qualifier The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26A few CodingStyle fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26Move other terrestrial tuners to common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Those tuners are currently used only under media/dvb. However, they can support also analog TV. Better to move them to the same place as the other hybrid tuners. This would make easier to use those tuners also by analog drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26reorganize some DVB-S Kconfig itemsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There are some DVB-S tuners together with DVB-S tags, while others together with tuners. Better to have all of them together. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Move tuners to common/tuners There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. This patch moves those common tuners into a common dir. It also moves saa7146 driver into drivers/media/video, where other hybrid drivers are placed. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-25merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24s5h1411: Adding support for this ATSC/QAM demodulatorSteven Toth
From: Steven Toth <stoth@hauppauge.com> This adds full support for this demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-25 mt312.h: dubious one-bit signed bitfieldMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Make it unsigned (0/1) rather than signed (0/-1). Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24drx397xD: fix math usageMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> The previous code were using a div64 math specific to i386. Replace for an asm-generic one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-09This patch adds support for the Micronas DRX3975D/DRX3977D DVB-TMauro Carvalho Chehab
demodulator. The module needs an external firmware file. The module has been tested on a Pinnacle 330e, but with modules that are currently not part of the linux-dvb tree. So consider this highly experimental, don't use this code unless you are an experienced kernel developer. Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-22tda10048: Adding an SNR tableSteven Toth
From: Steven Toth <stoth@hauppauge.com> Trying to improve the SNR reporting. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-22dib7000p: Add output mode param to the attach structMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> This allows future drivers to select the most appropriate output mode. Signed-off-by: Steven Toth <stoth@hauppauge.com> Reviewed-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21merge: http://linuxtv.org/hg/~hhackmann/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21stv0299: Fixed some typosOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed some typos. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-20stv0299: Add flag to turn off OP0 outputOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add flag to turn off OP0 output. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-20bsbe1: Use settings recommended by the manufacturerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Reworked the BSBE1 tuner support in bsbe1.h to follow the ALPS-recommended parameters more closely. Tested with BSBE1-based Activy cards and TT DVB-S rev 2.3. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-18Adding support for the NXP TDA10048HN DVB OFDM demodulatorSteven Toth
From: Steven Toth <stoth@hauppauge.com> Adding support for the NXP TDA10048HN DVB OFDM demodulator Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-18au8522: fix a small bug introduced by Checkpatch cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18CodingStyle fixes for au8522 and au0828Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-17au8522: CleanupSteven Toth
From: Steven Toth <stoth@hauppauge.com> au8522: Cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-14tda826x: Calculate cut off fequency from symbol rateHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch makes the tuner work with transonders providing higher symbol rates. It was contributed by Oliver Endriss Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-04-13tda10086 coding stlye fixesHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch replaces the c++ style comments. No functional changes Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-04-10au8522: consolidate mse2snr_lookup functionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> consolidate au8522_qam256_mse2snr_lookup, au8522_qam64_mse2snr_lookup and au8522_vsb_mse2snr_lookup into a single function, au8522_mse2snr_lookup. Pass the mse2snr table into au8522_mse2snr_lookup depending on the modulation type. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-09au8522: Added SNR support and basic cleanupSteven Toth
From: Steven Toth <stoth@hauppauge.com> au8522: Added SNR support and basic cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-04-10tda10086: make the xtal frequency a configuration optionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-04-08media/dvb/frontends replace remaining __FUNCTION__ occurrencesMichael Krufky
From: Harvey Harrison <harvey.harrison@gmail.com> __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-05au8522: add function au8522_read_mseMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> add function au8522_read_mse, which will be used to compute snr TO DO: mse2snr Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-05au8522: fix au8522_read_ucblocks for qamMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> ucblocks are reported in separate registers for vsb & qam Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 02:35:13 +0000