summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2008-12-18cx24116: change to ALGO_HWMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Slow tuning, EG: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal c2c0 | snr 0000 | ber 00012d4a | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 01 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 03 | signal c040 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal c040 | snr bb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Appears to be resolved by dropping zig-zag tuning and relying on hardware only: > szap-s2 -r -c 39.FTATV "1=Pgm1;Net1" reading channels from file '39.FTATV' zapping to 3 '1=Pgm1;Net1': delivery DVB-S, modulation QPSK sat 0, frequency 11140 MHz V, symbolrate 1425000, coderate 5/6, rolloff 0.35 vpid 0x0200, apid 0x0300, sid 0x0001 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 01 | signal ff80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal c040 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 1f | signal ff80 | snr c199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Tuning to a weaker channel shows that the hardware recovers sync: status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd40 | snr 5000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fd80 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 4e66 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK status 03 | signal fe40 | snr 5000 | ber 00000000 | unc 00000000 | status 01 | signal fd80 | snr 0000 | ber 00000000 | unc 00000000 | status 1f | signal fe40 | snr 5199 | ber 00000000 | unc 00000000 | FE_HAS_LOCK Also, tuning, moving the dish and then restoring the dish also retunes. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: fix retune regression introduced in 70ee86a7c630Mauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Thanks to AKPM for spotting this. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-18cx24116: bugfix: add missing delsys in FEC lookupMauro Carvalho Chehab
From: Darron Broad <darron@kewl.org> Delsys was missing when searching for FEC in table. This fixes FEC lookup for DVB-S2 QPSK modulation. Priority: normal CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-14CX24113: Fixed more typosPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Uwe Bugla pointed out that there are some more typos in some print-statements. Fixed. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Patch: fix a typo in cx24113.cPatrick Boettcher
From: Uwe Bugla <uwe.bugla@gmx.de> This patch fixes a typo in cx24113.c. Priority: normal Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-14Minor fixes for cx24113-driver (codingstyle)Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Fixed some minor coding style issues and some driver information printed when using the driver on a board. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-12-10sync from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> sync from main Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-23Add support for the CX24113 DVB-S tuner driverPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8. The driver was created with the help of Technisat. Thank you very much. Priority: normal Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-25fix boards for kernels with algo_controlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> changeset 4ecae6da8244 removed algo_control from i2c drivers. However, on older kernels, a dummy function to implement algo_control is required, otherwise, an OOPS is generated. This patch adds a backport for all i2c drivers that defines an i2c_algorithm, except for cafe_ccic, since OLPC hardware only works for kernels newer than 2.6.19. Some of the backported drivers would need also extra changes to work with older kernels, as specified on v4l/versions.txt. Yet, I decided to add the backport for those drivers also, since the lack of algo_control doesn't generate any compilation error, but it is enough to break the driver. So, better to all for all boards than to allow compiling a kernel backported that just generates OOPS. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Put s5h1411 into low power mode at end of attach() callMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-11Backport a few minor changes from upstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-10Whitespace cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some recent patches added a few bad whitespaces. Remove that. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-05merge: http://linuxtv.org/hg/~anttip/af9015Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-04af9013: fix bug in status readingAntti Palosaari
From: roel kluin <roel.kluin@gmail.com> - ! has a higher precedence than & Priority: normal Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-10-30merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-28Wait for a maximum of 100mSManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Disable PLL Loop while tuningManu Abraham
From: Ales Jurik <ajurik@quick.cz> Signed-off-by: Ales Jurik <ajurik@quick.cz> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-27Port STB0899 and STB6100Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-26merge: http://jusst.de/hg/v4l-dvbMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24Move lgdt3304 driver to the proper place and allow it to compileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24Move S921 driver to the proper place and allow it to compileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-24zl10353: add new register configuration for zl10353/especially 6mhz taiwan.Mauro Carvalho Chehab
From: Markus Rechberger <mrechberger@gmail.com> Priority: normal Signed-off-by: Markus Rechberger <mrechberger@sundtek.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-20s5h1411: Power down s5h1411 when not in useSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> Power down the s5h1411 demodulator when not in use (on the Pinnacle 801e, this brings idle power from 123ma down to 84ma). Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Skip reconfiguring demod modulation if already at the desired ↵Steven Toth
modulation From: Devin Heitmueller <devin.heitmueller@gmail.com> If we are already at the desired modulation, there is no need to reconfigure the demod (at a tuning time cost) Note that this change revealed that although the datasheet says the demod starts out in VSB-8 mode, the first tuning was failing consistently unless we went through the work of setting the registers. So add a field to denote this case so we always do the enable_frontend call, even if the first tuning request is for VSB-8. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-20s5h1411: Perform s5h1411 soft reset after tuningSteven Toth
From: Devin Heitmueller <devin.heitmueller@gmail.com> If you instruct the tuner to change frequencies, it can take up to 2500ms to get a demod lock. By performing a soft reset after the tuning call (which is consistent with how the Pinnacle 801e Windows driver behaves), you get a demod lock inside of 300ms Priority: normal Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Steven Toth <stoth@linuxtv.org>
2008-10-18s5h1411: Add the #define for an existing supporting I/FSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Add the #define for an existing supporting I/F Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: Remove meaningless codeSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Remove meaningless code Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: bugfix: Setting serial or parallel mode could destroy bitsSteven Toth
From: Steven Toth <stoth@linuxtv.org> Adding a serialmode function to read/and/or/write the register for safety. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: read_status() locking detection fixes.Steven Toth
From: Steven Toth <stoth@linuxtv.org> This includes new bit definitions for previously unknown bits. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: I/F related bugfix for 3.25 and remove spurious defineSteven Toth
From: Steven Toth <stoth@linuxtv.org> This should improve performance. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: Improvements to the default registersSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Improvements to the default registers Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-17Patch to remove warning message during cx88-dvb compilationMauro Carvalho Chehab
From: Igor M. Liplianin <liplianin@me.by> Remove warning message during cx88-dvb compilation. Also fixes double underline in function and struct names. Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17dvb: input data pointer of cx24116_writeregN() should be constMauro Carvalho Chehab
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> | drivers/media/dvb/frontends/cx24116.c:573: warning: passing argument 3 of 'cx24116_writeregN' discards qualifiers from pointer target type Make the `data' input pointer parameter of cx24116_writeregN() const to kill the warning. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-16cx24116: optimise emulated auto-pilotdarron@kewl.org
From: Christophe Thommeret <hftom@free.fr> Christophe divulged the following: "Since 8PSK (and higher mod) signals are very likely to have pilot symbols, pilot_auto should start with pilot_on for 8PSK. And since QPSK signals are unlikely to have pilot, pilot_auto should start with pilot_off for QPSK. Without the patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~900ms with patch: QPSK tuning delay: ~100ms 8PSK tuning delay: ~100ms " This patch does as Cristophe asks. In emulated auto-pilot we choose pilot-on for tuning PSK_8 and pilot-off for tuning QPSK. Priority: normal Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24123: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> cx24123: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1411: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1411: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16s5h1409: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> s5h1409: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24116: Checkpatch compliance #3Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Checkpatch compliance #3 Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx22702: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> cx22702: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16tda10048: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> tda10048: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24116: Checkpatch compliance #2Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Checkpatch compliance #2 Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-16cx24116: Checkpatch complianceSteven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Checkpatch compliance Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-13merge: http://linuxtv.org/hg/~stoth/s2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-07cx24116: Change the default SNR units back to percentage by default.Steven Toth
From: Steven Toth <stoth@linuxtv.org> cx24116: Change the default SNR units back to percentage by default. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-06cx24116: Add module parameter to return SNR as ESNO.Steven Toth
From: Steven Toth <stoth@linuxtv.org> I've retained the older percentage code after discussing this with Darron Broad, but made the ESNO option default. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-06S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16Steven Toth
From: Steven Toth <stoth@linuxtv.org> ... and cleanup any drivers using them. I've also removed NBC_QPSK and modified the cx24116 driver to check the delivery_type also, removing some excess namespace baggage. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-10-05Add support for DvbWorld USB cards with STV0288 demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Add support for DvbWorld USB cards with STV0288 demodulator. Those cards use Earda EDS-1547 tuner. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-10-05Remove NULL pointer in stb6000 driver.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Remove NULL pointer in stb6000 driver, as it raises error for DvbWorld USB card. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-10-05Allow custom inittab for ST STV0288 demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Allow custom inittab for ST STV0288 demodulator, as it is needed for DvbWorld USB card. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-10-03cx24116: Sanity checking to data input via S2API to the cx24116 demod.Steven Toth
From: Darron Broad <darron@kewl.org> Add some sanity checking to data input via S2API to the cx24116 demod. This patch is valid for both s2-mfe and s2. It was found when testing KAFFEINE with S2API support that invalid modulation modes amongst other parameters were being delivered to the demod. In order to debug this sanity checking has been added. An example session would involve kaffeine setting QAM_AUTO when querying DVB-T, then later when trying to tune to DVB-S this cached value would be presented in error. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 02:29:54 +0000