summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2006-10-18Add support for DiBcom DiB7000PCPatrick Boettcher
From: Patrick Boettcher <pboettcher@dibcom.fr> This patch contains support for the DiB7000PC-driver. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2006-10-17Add working dib7000m-modulePatrick Boettcher
From: Patrick Boettcher <pboettcher@dibcom.fr> First working version of the dib7000m-driver. This commit also makes the Hauppauge NOVA-T Stick working. Signed-off-by: Francois Kanounnikoff <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2006-10-14DVB: Add DVB_FE_CUSTOMISE support for MT2060Trent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Let the MT2060 be customized like most of the other DVB PLLs/front-ends. Also, add a missing dependency on I2C. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-10-14Fix DBV_FE_CUSTOMISE for card drivers compiled into kernelTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> When a front-end is disabled, card drivers that use it are compiled with a stub version of the front-end's attach function. This way they have no references to the front-end's code and don't need it to be loaded. If a card driver is compiled into the kernel, and a front-end is a module, then that front-end is effectively disabled wrt the card driver. In this case, the card driver should get the stub version. This was not happening. The stub vs real attach function selection is changed so that when the front-end is a module the real attach function is only used if the card driver is a module as well. This means a module front-end will be supported by card drivers that are modules and not supported by card drivers compiled into the kernel. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-10-13AGC command1/2 is board specificPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Added config-struct-parameter to take board-specific AGC command 1 and 2 into account. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-10-09tda826x: fix frontend selection for dvb_attachMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-09tda10086: fix frontend selection for dvb_attachMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-02CX24109 patch to eliminate the weird mis-tuningsSteven Toth
From: Steven Toth <stoth@hauppauge.com> A number of people have been reporting wierd tuning problems with various cards. Yeasah tracked down the problem to a miss-read datasheet. This resolves the problems. Signed-off-by: Yeasah Pell <yeasah@schwide.net> Signed-off-by: Steven Toth <stoth@hauppauge.com>
2006-09-20Removed compilation warningsPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Removed compilation warnings for unused statics and locals Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc fixes for Nova-T 500Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> - forward the clock to the slave undivided - when sleeping the 3000 do not shutdown the clock Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc fixes for DiB3000MC and Nova-T 500Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> - make the timing frequency update work. - fix AGC calibration for Nova-T 500 Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Hauppauge Nova-T 500 support addedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T). It adds correct AGC setting for the 3000P, correct firmware download state detection. Additionally it fixes the mt2060-driver to be able to be used with dvb_attach. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-19Misc. changes, DiB3000MC, MT2060Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Changed the attach-function of the dib3000mc-driver to return only one frontend. In case of multiple dib3000-chips on one board, one has to call the i2c-enumeration manually before. Added a field to Microtune 2060 config to output the clock to other tuners/device on a board. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-09-07Add tua6100 config wrapperAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I had forgotten to add the wrapper round the tua6100_attach function if its disabled in Kconfig Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-05Add driver for TUA6100Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> This driver was originally in budget-av.c, however I have extracted it into a seperate file to permit reuse. I also reworked the code to make it maintainable. I then examined the KNC1 windows drivers and rewrote the code in order to configure the PLL as they do. This solves a lot of reported tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-09-03Fix DVB Front-End Signal Strength InconsistencyAndrew de Quincey
From: "Bradley Kite" <bradley.kite@gmail.com> The cx22702 returns an 8 bit unshifted value for signal strength; this is inconsistent with most other frontends Signed-off-by: Bradley Derek Kite <bradley.kite@gmail.com> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-08-24isl6421: Release callback installed incorrectlyTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The release callback was installed in ops.release, it should have been ops.release_sec. This prevented to front-end release from getting called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-08-23merge: http://linuxtv.org/hg/~pb/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-23Fix a warning caused by a typo (comma instead of dot-comma)Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-21Another fix for the PID parsingPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Still the pid_parse bit was erased. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-19Keep the PID parse bit when resetting the output modePatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Matthieu Castet found that with the rewritten dib3000mc-driver the PID-parsing was handled correctly. This changeset fixes it. Thanks Matthieu Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-15merge from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> merge from main Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-10Tuning tweaks for ZL10353Chris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> More register setup which improves the ZL10353's tuning characteristics. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-10Fix "no data from ZL10353 based USB tuner" problemChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Force parallel transport stream output on the ZL10353 attached to a bluebird device. Addresses the problem where a frontend lock was observed, but no MPEG transport data was received. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-09[lnbp21] release callback fixedOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> lnbp21 module must use fe->ops.release_sec, not fe->ops.release. The release function of the frontend driver was never called for cards with lnbp21... Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-08-08merge: http://linuxtv.org/hg/~pb/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-07LNB voltage control was inverted for the benefit of geniatech cards on KworldMauro Carvalho Chehab
From: Yeasah Pell <yeasah@schwide.com> 1) It sets LNBDCPol differently based on the card type. Now it should work properly for both the kworld and geniatech cards. 2) It stops returning an error for the SEC_VOLTAGE_OFF voltage command (the cx88-dvb level handles the actual voltage on/off, but it still passes the ioctl down to the cx24123 level, which previously rejected the OFF as invalid so the ioctl would report failure) Signed-off-by: Yeasah Pell <yeasah at schwide.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-06Improve hardware algorithm by setting the appropriate registersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Hardware algorithm needs to be configured to: 1) Increase timeout constants, to detect weaker signals; 2) do a wider zigzag search. Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-06Initial commit for the DiB7000M-demodPatrick Boettcher
From: Patrick Boettcher <pboettcher@dibcom.fr> Initial commit for the driver for the DiB7000M COFDM demodulator. Signed-off-by: Francois KANOUNNIKOFF <fkanounnikoff@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2006-08-06Make the dibx000-common-module GPLPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Forget to put the MODULE-define and thus to give the license. Now GPL Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-06Remove debug-print from dib3000mcPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Removed and commented a small debug function. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-06merge from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> merge from main Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-05merge: http://linuxtv.org/hg/~pascoe/pending/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-05HW algoManu Abraham
Change this card to use HW ALGO tuning From: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-08-05Change BER configManu Abraham
Change the bit error counter configuration to be the actual BER. Originally it was reporting UCB From: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-08-05Soft decision thresholdManu Abraham
Set the Soft decision threshold properly for the specified FEC From: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Yeasah Pell <yeasah@schwide.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2006-08-06dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-03MT2060: turn on the VGAPatrick Boettcher
From: matthieu castet <castet.matthieu@free.fr> The VGA was not turned on after calling sleep. This lead to bad performance in difficult areas. Signed-off-by: matthieu castet <castet.matthieu@free.fr> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-03merge from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> merge from main Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-03Fix tda826x detectionAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> The tda826x detection was (correctly) cleaned up earlier, but unfortunately changing the number of received i2c messages from 2 -> 1 was missed. This fixes it. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-08-02Add missing dvb-pll Kconfig infrastructure.+ CTL_SMC_PHY,Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Add missing dvb-pll Kconfig infrastructure. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-08-02DiB3000MC: set FE to NULL after being freedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> DiB3000MC: set FE to NULL after being freed Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-08-02merge from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> merge from main Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-07-30Add missing KConfig I2C dependenciesAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> This was breaking the build if i2c was not previously set Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-30Use dprintk in tda826x.Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> As opposed to printk() at the moment, which will fill logs uselessly Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-30Disable tda10086 debug by default.Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Left on by accident. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-30tda826x: Remove 0-byte I2C write; put tuner_ops info in static structAndrew de Quincey
From: Trent Piepho <xyzzy@speakeasy.org> Remove the 0-byte write that precedes 2-byte read. Move initialize the info field in the static tuner_ops definition, so that it doesn't need to be done manually. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-30Add drivers for tda10086 + tda826x chipsAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> TDA10086 is a new DVB-S demodulator TDA826x is a DVB-S Silicon Tuner Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-29Added missing dibx000-common code and headersPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> The first commit omitted the common-code and header-files. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-07-29merge: from mainPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> merge: from main Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 13:28:29 +0000