summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2009-03-11au8522: add mutex protecting use of hybrid stateDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Access using the hybrid state framework requires the list to be protected by a mutex. Thanks to Michael Krufky <mkrufky@linuxtv.org> for reporting this during a code review. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: add support for analog side of demodulatorDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add support for the analog functionality in the au8522 analog/digital demodulator Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: make use of hybrid framework so analog/digital demod can share stateDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Make use of the hybrid tuner framework so the analog and digital parts of the au8522 demodulator can make use of the same shared state. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: power down the digital demod when not in useDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> When the au8522 is idle, put the chip into a low power mode (reduces power consumption from 450ma to 346ma) Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: fix register read/write high bitsDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> For the i2c messages to read and write registers, the two high order bits of the first byte dictates whether it is a read or a write operation. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: move shared state and common functions into a separate header filesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Move the au8522 state structure, as well as exposing functions needed by the analog side of the demodulator into a common header file. Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11au8522: rename the au8522.c source fileDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Rename the au8522.c file to au8522_dig.c so that more source files can be added to the driver while preserving the original name of au8522.ko Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11lgdt3305: add MODULE_VERSIONMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We'll start off with MODULE_VERSION("0.1") Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11lgdt3305: add missing space in commentMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> small whitespace cleanup - space missing after the * Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-11lgdt3305: add email address to MODULE_AUTHORMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-10merge: http://linuxtv.org/hg/~mkrufky/lgdt3305Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10zl10353: i2c_gate_ctrl bug fixAntti Palosaari
From: Antti Palosaari <crope@iki.fi> zl10353 i2c-gate was always closed and due to that devices having tuner behind i2c-gate were broken. Add module configuration which allows disabling i2c-gate only when really needed. Priority: high Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-03-10merge: http://linuxtv.org/hg/~mkrufky/dibcomMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-10/frontends/Kconfig: Move af9013 Kconfig option to its proper placeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> af9013 is not a development tool. It is, instead, a DVB-T module. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09merge: http://udev.netup.ru/hg/v4l-dvb-netupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-09remove dib0070_ctrl_agc_filter from dib0070.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This function prototype is defined but the function itself does not exist. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib3000mc.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib7000m.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-09cleanup linewraps in dib7000p.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08remove build-time dependencies on dib3000mcMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08remove build-time dependencies on dib7000pMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08remove build-time dependencies on dib7000mMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-08dvb/frontends: fix duplicate 'debug' symbolMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Fix dvb frontend debug variable to be static, to avoid linker errors: drivers/built-in.o:(.data+0xf4b0): multiple definition of `debug' arch/x86/kernel/built-in.o:(.kprobes.text+0x90): first defined here ld: Warning: size of symbol `debug' changed from 85 in arch/x86/kernel/built-in.o to 4 in drivers/built-in.o It would also be Good if arch/x86/kernel/entry_32.S didn't have a non-static 'debug' symbol. OTOH, it helps catch things like this one. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-07stv0900: delete debug messages not related to stv0900 tuning algorythmIgor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-06stv0900: fix some compile warnings on 64-bit systems.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-06zl10036: fix compile warning on kernel 2.6.23.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-06Kconfig: only open the customise menu if selectedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of asking a lot of questions for the poor users, let's just hide the frontend customise menu, if the user doesn't want to customise. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-28Fix i2c code of flexcop-driver for rare revisionsPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This patch adds a workaround in the i2c-code of the flexcop-driver to fix support for SkyStar2 rev 2.7. There are not many devices out there, that's why this bug was not revealed earlier. Priority: high Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2009-02-24Add support for Zarlink ZL10036 DVB-S tuner.Mauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> This driver is based on initial work by Tino Reichardt and was heavily changed. The datasheet of the zl10036 can be found here and on other places on the net: http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf The zl10038 is similar to the zl10036, so it is maybe possible to write a common driver of necessary. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-04merge: http://udev.netup.ru/hg/v4l-dvb-netupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-04Fix typo in lnbp21.cIgor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> It was a typo in the function name, it should be lnbh24_attach, and not lnbp24_attach. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03stv6110: remove a wrong include fileMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> For sure a frontend doesn't need to include cx23885.h header. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03Add support for ST STV0900 dual demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Add last piece of code to support ST STV0900 dual demodulator. The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03Add core code for ST STV0900 dual demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03Add more headers for ST STV0900 dual demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03Add headers for ST STV0900 dual demodulator.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> The IC consist of two dependent parts. It may use single or dual mode. Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03Add support for ST LNBH24 LNB power controller.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> The controller consist of two independent parts. Every part is similar to LNBP21, but has configurable i2c address. It is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-03-03Add support for ST STV6110 silicon tuner.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> The tuner is used in NetUP Dual DVB-S2 CI card. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_S2_CI Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-02-23remove redundant memset after kzallocMauro Carvalho Chehab
From: Matthias Schwarzott <zzam@gentoo.org> Hi there! While having a look at the allocation of struct dvb_frontend in *_attach functions, I found some cases calling memset after kzalloc. This is redundant, and the attached patch removes these calls. I also changed one case calling kmalloc and memset to kzalloc. Regards Matthias Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-27STB6100 init fix, the call to stb6100_set_bandwidth needs an argumentManu Abraham
in Hz not kHz, and a comment incorrectly says MHz instead of Hz. I don't know if this caused real problems anywhere From: Hans Werner <HWerner4@gmx.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2009-01-13add support for LG Electronics LGDT3305 ATSC/QAM-B DemodulatorMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-01-27Bug: Use signed types, Offsets and range can be negativeManu Abraham
Code simplification: use in kernel macros From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2009-01-27Use Diseqc 3/3 mode to send dataManu Abraham
From: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2009-01-17Proper implement set_voltage in cx24116.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Now there is a card, which uses cx24116 to control LNB DC voltage. It is DVBWorld DVBS2 PCI-e 2005. The patch is nedded to add support for that card. 1. Rename CMD_SET_TONEPRE to CMD_LNBDCLEVEL. 2. Fill set_voltage with actually control voltage code. 3. Correct set_tone to not affect voltage. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2009-01-17v4l-dvb: fix a bunch of compile warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-10Fix 'stb0899_get_srate' defined but not used warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-07backport commit 9b4778f680aa79d838ae2be6ab958938f744ce5fMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Author: Harvey Harrison <harvey.harrison@gmail.com> trivial: replace last usages of __FUNCTION__ in kernel __FUNCTION__ is gcc-specific, use __func__ kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-05drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2Mauro Carvalho Chehab
From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Report to userspace that cx24116 and stv0899 drivers support DVB-S2. Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-By: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 23:23:01 +0000