summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/frontends
AgeCommit message (Collapse)Author
2007-11-19zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19zl10353: Improve support for boards without a tuner on secondary i2cChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Issue FSM_GO instead of TUNER_GO if there is no tuner attached to the secondary i2c bus. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-24tda18271: clean up i2c_gate handlingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Call analog_demod_ops->i2c_gate_ctrl when in analog tuning mode, and frontend_ops.i2c_gate_ctrl when in digital tuning mode. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/Makefile | 1 linux/drivers/media/dvb/frontends/tda18271.c | 33 ++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-)
2007-10-24tda18271: clean up debug macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda18271.c | 76 ++++++++++++--------------- 1 file changed, 35 insertions(+), 41 deletions(-)
2007-10-22move std if setting from tda8290 to tda827xMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda827x.c | 61 +++++++++++++++++++++++++--- linux/drivers/media/dvb/frontends/tda827x.h | 3 - linux/drivers/media/video/tda8290.c | 20 --------- 3 files changed, 57 insertions(+), 27 deletions(-)
2007-10-22tda8290: add support for NXP TDA18271 tuner and TDA8295 analog demodMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon. TDA8295 + TDA8275a not yet tested. TDA8290 + TDA18271 not yet supported. Digital mode of TDA18271 not yet tested & needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.tuner | 1 linux/drivers/media/Kconfig | 3 linux/drivers/media/dvb/frontends/Kconfig | 7 linux/drivers/media/dvb/frontends/Makefile | 1 linux/drivers/media/dvb/frontends/tda18271.c | 1062 +++++++++++++++++++++++++ linux/drivers/media/dvb/frontends/tda18271.h | 40 linux/drivers/media/video/tda8290.c | 339 +++++++ linux/drivers/media/video/tda8290.h | 8 linux/drivers/media/video/tuner-core.c | 5 linux/drivers/media/video/tuner-types.c | 3 linux/drivers/media/video/tveeprom.c | 2 linux/include/media/tuner.h | 2 v4l/versions.txt | 2 13 files changed, 1467 insertions(+), 8 deletions(-)
2007-10-21tda827x: fix GPL export on attach functionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> EXPORT_SYMBOL should have been EXPORT_SYMBOL_GPL Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda827x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2007-08-25Move all tda8275/8275a tuning code from tda8290 module into tda827x moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add analog tuning support to tda827x dvb_frontend tuner module. Convert tda8290 module back to native tuner interface. The tda8290 analog demodulator will be handled the same way as tda9887. The tuner.ko module (tuner-core) will pass commands to tda8290 via the tuner_operations interface. tda8290 will communicate with tda827x via the dvb_frontend interface, while passing a pointer to a private data structure. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 1 linux/drivers/media/dvb/frontends/tda827x.c | 307 ++++++++++++++- linux/drivers/media/dvb/frontends/tda827x.h | 10 linux/drivers/media/video/tda8290.c | 566 +++++----------------------- linux/drivers/media/video/tda8290.h | 30 - linux/drivers/media/video/tuner-core.c | 16 6 files changed, 424 insertions(+), 506 deletions(-)
2007-07-02FIX: Write to the correct registerManu Abraham
Thanks to Marko Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02FIX: Add in missing inversion (should be ideally in the config struct)Manu Abraham
Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02FIX: reading from wrong registersManu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02FIX: register value is not reset to 0 after writeManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02Let's neither sleep nor wakeup for nowManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02Use a delay for tracking acquisition statusManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-02On the KNC1 cards the CLOCK is clamped to a maximum limit of 90MHz, eventhoughManu Abraham
not limited in hardware, this causes instabilities at a higher clock due to issues such as thermal, also the divider wraps around, which causes the demodulator core to actually run at a lower frequency. This needs to be empirically tested whether it affects other cards. If found necessary, this parameter needs to be moved out to the config struct such that it can be made hardware dependant. Reducing the CLOCK from 99MHz to 90MHz improved the acquisition time taken on the KNC1 cards and hence such a change. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-02-24FIX: a possible division by zeroManu Abraham
Thanks to Marko Schluessler <marco@lordzodiac.de> From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-03FIX: fix a bug in the charge pump settingManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-02-24Add STB6100 SupportManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-02-24Add STB6100 SupportManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-03Add STB0899 to buildManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-07-03Add STB0899 supportManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-24mt2131: replace comma with semicolon fixSteven Toth
From: Steven Toth <stoth@hauppauge.com> Semicolon fix. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-24s5h1409: Fix broken QAM supportSteven Toth
From: Steven Toth <stoth@hauppauge.com> This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-27fix typo in DVB_PLL Kconfig help textMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> s/driver/drives/1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-27Backed out changeset 09fea8806b2fMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch was wrong. A better changeset follows. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-26 dvb: Fix kconfig help textMauro Carvalho Chehab
From: Uwe Bugla <uwe.bugla@gmx.de> This patch corrects some broken English in Kconfig. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-09dvb-pll: report whether input rf will be autoselected or set via insmod optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-09dvb-pll: always show pll name if forced via insmod optionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The name of the pll will be shown if forced via insmod option, or if debug is enabled. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-07dvb-pll: add module option to force dvb-pll desc id (for debug use only)Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add a module option to force the dvb-pll module to use an alternate dvb-pll description without having to recompile the kernel. Having a module option like this is useful in some cases, where the vendor may release an alternate revision of the hardware using a different tuner, but without changing the pci subsystem / usb device ids. This option is intended for debugging purposes _only_. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-09dvb-pll: increase DVB_PLL_MAX to 64Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Increased DVB_PLL_MAX from 16 to a figure that would never be reached in a practical sense. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-07dvb-pll: add module option to specify rf inputMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add a module option to dvb-pll, called "input" to specify which rf input to use on devices with multiple rf inputs. If the module option is not specified, then the driver will autoselect the rf input, as per previous behavior. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-07dvb-pll: store instance ID in dvb_pll_priv structureMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store an instance ID in the dvb_pll_priv structure, so that module options specific to a given pll may be used by the functions within the driver. When debug is turned on, print a message indicating which pll was attached and it's instance id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-07dvb-pll: pass fe pointer into dvb_pll_configure() and set() functionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The pll-specific set() function will need access to the dvb_pll_priv structure for new functionality. This patch gives access to this structure to the required functions. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-04Removed unused function mt2131_set_gpo()Steven Toth
From: Steven Toth <stoth@hauppauge.com> Unused code is removed. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-21Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-16compat: Add missing compat.hTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> dvb_ca_en50221.c and dvb-pll.c were missing compat.h, and they used kzalloc which is something that compat.h takes care of. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-11dvb-pll: Set minimum and maximum frequency properlyTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The tuner maximum frequency wasn't being set, while the minimum frequency was set to what the maximum should have been. The recent patch to enforce the limits effectively broken any tuner using dvb-pll. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-09Fix the min/max frequencies of some DVB-C frontendsOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> The min frequencies of the DVB-C frontends are wrong. In Europe, the center frequency of the lowest channel is 50.5MHz and not 51MHz. All known cards with the stv0297/tda0002x/ves1820 frontend are able to tune to this frequency. I've changed the range to the lowest channel - 1/2 bandwidth and the highest channel + 1/2 bandwidth. For the design of the dvb driver, the frequency ranges must be part of the tuner and not of the frontend itself. The same frontend may be used for different tuners. The attached patch does only fix the ranges and not the design. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-08-06tda8083: fix frequency and symbolrate infoOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> The TDA8083 supports a symbol rate from 12..30 MSym/s. The Grundig 29504-451 tuner uses the TDA8060 down-converter, which has a frequency range from 920..2200MHz. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Lars Buerding <lindvb@metatux.net>
2007-08-03merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-31mt2131 s5h1409: correct frontend selection logicTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> If a card driver is compiled into the kernel and mt2131 or s5h1409 are compiled as modules, the kernel won't link. A compiled in driver can't use a module, so in this case the mt2131 or s5h1409 are effectively disabled w.r.t the compiled in driver and the stub attach function should be used. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-31Module parameter description for SFN workaroundPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Thanks to Matt Doran I found that there the module parameter description was not OK. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31Fix support for DiB7000M-devicesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Forgot to initialize the timf_default field. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-31Add module parameter to enable SFN workaroundPatrick Boettcher
From: Matt Doran <matt.doran@papercut.biz> In some areas in the world the broadcasters are not using the same cellid for each transmitter in a SFN. The DiBcom has problems with that setup. The module parameter buggy_sfn_workaround makes it re-usable. Signed-off-by: Matt Doran <matt.doran@papercut.biz> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-07-30merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-30Add support for DiB7070-based devicesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by: Jean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
2007-07-29dvb-pll: make struct dvb_pll_fcv1236d staticMichael Krufky
From: Adrian Bunk <bunk@stusta.de> The fcv1236d support patch was created before the "dvb: remove static dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't get merged until after the fact. struct dvb_pll_fcv1236d can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-28whitespace cleanup for mt2131 and s5h1409Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - trivial whitespace cleanups - add "c-basic-offset: 8" to enforce tabbing style in emacs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-27merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Sync with DiBcom Driver Release 2.1.3 + some improvementsPatrick Boettcher
From: Patrick Boettcher <pboettcher@dibcom.fr> This changesets syncs the OpenSource driver for DiBcom demodulators with version 2.1.3 of DiBcom reference driver. There were some improvements since the last release for linux-dvb, e.g.: - stepped AGC startup - less space for initialization - diversity synchronization Furthermore this changeset contains the following things: - latest AGC settings for MT2266-based devices (namely Nova-TD and other) will improve the sensitivity - support for STK7700D reference design in dib0700-devices - remove some line-breaks when debugging is enabled - getting rid of layer between frontend_parameters and ofdm_channel used in dib*-drivers Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr>
generated by cgit v1.2.3 (git 2.25.1) at 2025-08-06 13:02:24 +0000