summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/ttpci/budget-av.c
AgeCommit message (Collapse)Author
2006-04-20Additional frontend_init safety checksAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Don't try and set the tuner ops if the demod was not detected. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert ttpci/budget-av to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Add pll gate control calls where appropriate. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-13Fix KNC1 card frontend detectionAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Since I reordered the CI/frontend detection, it turns out the frontend needs to have a GPIO set to power it on; otherwise frontend init fails. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-06Fix oops in budget-av with CIAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Now that the CI code reinitialises the frontend, need to move the CI initialisation to after the frontend init in order to ensure the frontend is always in a good state. Fixes an oops caused by the frontend being NULL as well. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-03-30Fix budget-av CAM resetAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Unfortunately on the budget-av board, the CAM reset line is tied to the frontend reset line, so resetting the CAM also zaps the frontend. This breaks the tda1004x at least, and causes it to fail to tune until the budget-av module is reloaded. This patch adds an exported function to dvb_frontend that allows a card to forcibly reinitialise a frontend. The budget-av now does this on CAM reset, which corrects this problem. Note: other CA interface implementations (e.g. budget-ci) do not need this since they do not tie the CAM reset line to the frontend reset line. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-02-23Support for Satelco EasyWatch DVB-S lightOliver Endriss
From: Thilo Berger <thilo_berger@gmx.net> Support for Satelco EasyWatch DVB-S light. Signed-off-by: Thilo Berger <thilo_berger@gmx.net> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-01-12adding support for knc1 Tv Star dvb-sMichael Krufky
From: Regis Prevot <regis.prevot@anevia.com> - added knc1 tv star dvb-s support with philips tuner sd1878. Signed-off-by: Regis Prevot <regis.prevot@anevia.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2006-01-11From: Panagiotis Issaris <takis@issaris.org>Mauro Carvalho Chehab
Conversions from kmalloc+memset to k(z|c)alloc Conversions from kmalloc+memset to k(z|c)alloc. kernel-sync Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2005-11-26Whitespaces cleanups.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
ARRRGH!
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
I just can't get this right :( Fix my second mistake
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
Changed the wrong parameter :(
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
Fix voltage switching
2005-11-23Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
Port code for SU1278/SH2 (TUA6100) from pre-refactored code
2005-11-09Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>Andrew de Quincy
Fixes for the topuptv/SCM mediaguard CAM module in KNC1 CI module
2005-11-08fixed DiSEqC timing for saa7146-based budget cardsOliver Endriss
(speed-up ioctls using SAA7146_I2C_SHORT_DELAY) Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2005-10-24stv0299_set_frontend(): reduced number of i2c transfers, set register 0x12 ↵Oliver Endriss
from inittab Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2005-10-03Remove broken stv0299 enhanced tuning codeAndrew de Quincy
2005-08-12fix initialization from incompatible pointer typeAndreas Oberritter
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
2005-08-02Enable frontend on KNC plus cards.Andrew de Quincy
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2005-08-02Fixes for CI interfaceAndrew de Quincy
2005-07-24Reverted change - caused more problems on another machineAndrew de Quincy
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2005-07-24Switch to different AGC setting to remove Terratec DVB-T glitches.Andrew de Quincy
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2005-07-08From: Julian ScheelPatrick Boettcher
The / in the driver name (budget dvb /w video in) is not a valid character for device names - removed it, now it works! Same for ttusb-budget. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Julian Scheel <julian@jusst.de>
2005-06-19Fix for QAM128 in VHF band suggested by Timo Helkiö.Johannes Stezenbach
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
2005-05-18adapted to tda1004x driver updateHartmut Hackmann
2005-04-04 budget-av:Kenneth Aafloy
- remove enable_ci, ci interface is assumed to be present if the saa7113 is not found. - reduce the delay when checking for saa7113 - clean up the cam reset according to specifications - turn off Vcc to the cam slot if cam is removed or fails reset - remove cam reset in ciintf_init - clean up printks (KERN_) - move gpio setting into saa7113_init - clean up unreadable frontend_init
2005-04-03patch by Alexander Riedel:Johannes Stezenbach
add support for KNC One Plus DVB-T and similar KNC One cards
2005-03-19 - Patch by Olaf Titz: gcc 2.95 compile fixesKenneth Aafloy
2005-03-17ttpci: follow dvb_register_adapter changes in dvbdev.[ch]Andreas Oberritter
2005-03-08 - Fix for CAMs on Typhoon DVB-S, where it would constantly reset itself.Kenneth Aafloy
2005-02-12patch by Adrian Bunk:Johannes Stezenbach
This patch contains the following possible cleanups: - make needlessly global code static - remove the following EXPORT_SYMBOL'ed but unused function: - bt8xx/bt878.c: bt878_find_by_i2c_adap - remove the following unused global functions: - dvb-core/dvb_demux.c: dmx_get_demuxes - dvb-core/dvb_demux.c: dvb_set_crc32 - remove the following unneeded EXPORT_SYMBOL's: - dvb-core/dvb_demux.c: dvb_dmx_swfilter_packet - dvb-core/dvb_demux.c: dvbdmx_connect_frontend - dvb-core/dvb_demux.c: dvbdmx_disconnect_frontend - dvb-core/dvbdev.c: dvb_class Signed-off-by: Adrian Bunk <bunk@stusta.de>
2004-11-20Added setting to allow inversion of OCLKAndrew de Quincy
2004-11-14 - Fix budget module usage count for frontend/demux devices.Kenneth Aafloy
2004-11-13Fix module usage count problemAndrew de Quincy
2004-11-13Corrected formattingAndrew de Quincy
2004-11-12Enhanced poll_slot_status to support non-IRQ interfacesAndrew de Quincy
2004-11-12Updated to fix problems with some CAMs on KNC1 cardsAndrew de Quincy
2004-11-12Added locking to prevent GPIO problem between polling and IO/attribute memoryAndrew de Quincy
access
2004-11-12Support for KNC1/Cinergy CI modules. Patch by Olivier Gournet and myself.Andrew de Quincy
2004-11-10Patch from olivier to add support for KNC cardsAndrew de Quincy
2004-10-28Imported FE_REFACTORING to HEADAndrew de Quincy
2004-09-20- remove stupid DEB_* debugging macro horror from av7110 and budget drivers, ↵Michael Hunold
replace them with dprintk(level, msg) instead - remove whitespace and linefeed violations all over the place
2004-08-18- nuke dvb functions stuffMichael Hunold
2004-08-18- remove dvb i2c code (all drivers are ported to kernel i2c)Michael Hunold
- remove dvb i2c frontend (un)register code (all drivers use non-i2c frontend calls now) - add i2c driver ids for all frontends to dvb_frontend.h (should be submitted to i2c-id.h) - fix usage of i2c driver ids in dst, ves1x93, nxt6000 drivers - remove dvb i2c functionality from av7110 and budget drivers - remove dvb i2c functionality from Skystar2 driver - fix up kernel Makefile - add a FE_ATSC case to avoid compiler warning (print warning message instead)
2004-07-29 - Fix videodev has no release callback.Kenneth Aafloy
NOTE: Michael, please remember to change the other drivers when submitting to Andrew.
2004-06-24Uli Luckas' Cinergy1200 patchsets and SAA patches fixing the broken frontend ↵Holger Waechtler
drivers after the kernel-i2c changes
2004-06-04- same as for budget-ci: make sure the data pointer is valid before ↵Michael Hunold
budget-core init function is called
2004-05-03- fix include file order in ttpci-driverMichael Hunold
- convert tda1004x driver to kernel i2c, implement untested firmware loading
2004-03-19patch by Kenneth Aafløy to add support for Typhoon DVB-S budget cardJohannes Stezenbach
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 19:41:55 +0000