summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/ttpci
AgeCommit message (Collapse)Author
2008-10-18backport commit 1a651a00e20fd4997f0b91258f6f95b7d96edcd9Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Author: Harvey Harrison <harvey.harrison@gmail.com> byteorder: remove direct includes of linux/byteorder/swab[b].h A consolidated implementation will provide this generically through asm/byteorder, remove direct includes to avoid breakage when the changeover to the new implementation occurs. kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-22dvb/budget: push adapter_nr mod option down to individual driversJanne Grunau
From: Janne Grunau <janne-dvb@grunau.be> adapter_nr mod option does not make sense for budget-core since it is only common code shared by all budget drivers Priority: normal Signed-off-by: Janne Grunau <janne-dvb@grunau.be>
2008-09-05merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-05budget: Add callback to load firmware for the TDHD1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Supply callback to load firmware for the TDHD1 tuner (using request_firmware). Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-04v4l-dvb: fix assorted sparse warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix sparse warnings. None are serious, but cutting down on these helps find future serious sparse warnings/errors. Redid the av7710.c patch based on a suggestion by Oliver Endriss. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-09-04dvb-ttpci: Support full-ts hardware modificationOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add support for the 'full-ts' hardware modification. On full-featured cards the data throughput is limited by the hardware design. The full-ts mod removes this bottleneck, i.e. the card is able to deliver the complete transport stream of a transponder. For details see http://www.escape-edv.de/endriss/dvb-full-ts-mod Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-03budget: Support Activy DVB-T with TDHD1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Support Fujitsu-Siemens Activy DVB-T card rev AL (ALPS TDHD1-204A tuner). Priority: normal Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-09-02merge: http://linuxtv.org/hg/~tmerle/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-01budget: udelay changed to mdelayThierry MERLE
From: Thierry MERLE <thierry.merle@free.fr> budget.ko fails to build on ARM with: ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined! make[1]: *** [__modpost] Error 1 __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Priority: high Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
2008-08-25V4L/DVB: follow lspci device/vendor styleMauro Carvalho Chehab
From: Bjorn Helgaas <bjorn.helgaas@hp.com> Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-27remove select's of FW_LOADERMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> After commit d9b19199e4894089456aaad295023263b5225c1a (always enable FW_LOADER unless EMBEDDED=y) we can remove the FW_LOADER select's and corresponding dependencies on HOTPLUG. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-15dvb-ttpci: Fix build with CONFIG_INPUT_EVDEV=n (Bug #11042)Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fix build with CONFIG_INPUT_EVDEV=n (Bug #11042). Thanks to Toralf Förster <toralf.foerster@gmx.de> for reporting. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Toralf Förster <toralf.foerster@gmx.de>
2008-07-08v4l-dvb: remove support for kernels < 2.6.16Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 4 removes the compatibility support for kernels < 2.6.16. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-08v4l-dvb: remove support for kernels < 2.6.10Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 2 removes support for kernels < 2.6.10. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-08v4l-dvb: remove support for kernels < 2.6.0Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> First phase of the backwards compatibility cleanup: stop supporting kernels older than 2.6.0. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-29ttpci: tda827x.h is at drivers/media/commonMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Stephen Rothwell <sfr@canb.auug.org.au>: drivers/media/dvb/ttpci/budget-ci.c:50:21: error: tda827x.h: No such file or directory Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22WRITE_RPS1() converts to le32 itselfMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> ... but two ancient drivers had not noticed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-22split dvb_ringbuffer dual-use functionsMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> split the suckers into kernel-memory and user-memory versions, annotate both properly. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-20budget-ci: Support the bundled remote control of the TT DVB-C 1501Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Support the bundled remote control of the TT DVB-C 1501 Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: SG <SiestaGomez@web.de>
2008-06-20av7110: OSD transfers should not be interruptedOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> OSD transfers should not be interrupted. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-20av7110: Catch another type of ARM crashOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Catch another type of ARM crash. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-20av7110: Removed some obsolete definitions and one unused variableOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Removed some obsolete definitions and one unused variable. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-18Add missing select for MEDIA_TUNER_TDA827XMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> $ find linux/drivers/media/dvb -exec grep -l tda827x_attach '{}' \; linux/drivers/media/dvb/dvb-usb/m920x.c linux/drivers/media/dvb/ttpci/budget-ci.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-16ttpci/Kconfig: Technotrend budget C-1501 needs tda10023Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Auto-selects tda10023, for budget-ci, if !DVB_FE_CUSTOMISE. This is needed for Technotrend budget C-1501 dvb board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-15budget-ci: Add support for Technotrend budget C-1501 dvb-c cardOliver Endriss
From: Sigmund Augdal <sigmund@snap.tv> The following experimental patch adds support for the technotrend budget C-1501 dvb-c card. The parameters used to configure the tda10023 demod chip are largely determined experimentally, but works quite for me in my initial tests. Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-05Fix INPUT dependency at budget-ciMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30v4l: fix assorted compile warnings/errorsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-21 fix unaligned access in av7110.cMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 fix the roothole in av7110_av.cMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> direct dereferencing from user-supplied address Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-18TDA10023: make few parameters configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-06Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21merge: http://linuxtv.org/hg/~hhackmann/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21budget: Support for Activy budget card with BSBE1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60. Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner). Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-21stv0299: Fixed some typosOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed some typos. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-10tda10086: make the xtal frequency a configuration optionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-04-09Adds selectable adapter numbers as per module optionMichael Krufky
From: Janne Grunau <janne-dvb@grunau.be> The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-11merge:http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-09budget: Add support for Fujitsu Siemens DVB-T Activy BudgetOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Implement support for Fujitsu Siemens DVB-T Activy Budget, sub-system id 0x1131:0x5f61. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-09budget-av: Fix CI interface on (some) KNC1 DVBS cardsOliver Endriss
From: Christoph Pfister <pfister@linuxtv.org> Quoting the commit introducing reinitialise_demod (3984 / by adq): "These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend device when the CI module is reset." Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock. Signed-off-by: Christoph Pfister <pfister@linuxtv.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-09budget-av: Fix support for certain camsOliver Endriss
From: Christoph Pfister <pfister@linuxtv.org> The current ci implementation doesn't accept 0xff when reading data bytes (address == 0), thus breaks cams which report a buffer size of 0x--ff like my orion one. Remove the 0xff check altogether, because validation is really the job of a higher layer. Signed-off-by: Christoph Pfister <pfister@linuxtv.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-08media/dvb/ttpci replace remaining __FUNCTION__ occurrencesMichael Krufky
From: Harvey Harrison <harvey.harrison@gmail.com> __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-13Support for DVB-S demod PN1010 (clone of S5H1420) addedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This device is a clone of the PN1010 used by SkyStar2 rev2.7 . This patch adds support for the flexcop-device and makes the driver look a little bit nicer. It needs to be checked whether the driver is still ok for the budget-cards. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-02-10tda10086: make the 22kHz tone for DISEQC a config optionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Some cards need the diseqc signal modulated, while some just need the envelope to control the LNB supply. This fixes Bug 9887 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Acked-By: Patrick Boettcher <pb@linuxtv.org> Acked-by: Oliver Endriss <o.endriss@gmx.de>
2008-01-30dvb-ttpci: Improved display of still picturesOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Improved display of still pictures (VIDEO_STILLPICTURE ioctl). Ensure that both fields are displayed for progressive frames. Thanks to Reinhard Nissl and Klaus Schmidinger for finding out that the FREEZE command does this. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Reinhard Nissl <rnissl@gmx.de> Thanks-to: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
2008-01-30budget-av: Add support for Satelco EasyWatch PCI DVB-TOliver Endriss
From: Kim Sandberg <ksan@saunalahti.fi> Add support for Satelco EasyWatch PCI DVB-T, sub-id 0x1894:0x003a. Signed-off-by: Kim Sandberg <ksan@saunalahti.fi> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-01-30budget-av: Add support for KNC TV Station Plus X4Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add support for KNC TV Station Plus X4, sub-system id 0x1894:0x0015. Based on a patch submitted by Johannes Deisenhofer. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Johannes Deisenhofer <jo.deisenhofer@googlemail.com>
2008-01-27[PATCH] static memoryDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> - Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-01-10 av7110: fix section mismatchMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Fix driver data name to match whitelist of acceptable names that contain pointers init data so that section mismatch warning is placated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport changeset 1977f032722c27ee3730284582fd3991ad9ac81bMauro Carvalho Chehab
kernel-sync: Author: Jiri Slaby <jirislaby@gmail.com> Date: Thu Oct 18 23:40:25 2007 -0700 remove asm/bitops.h includes remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 19:26:45 +0000