summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb/ttpci
AgeCommit message (Collapse)Author
2008-06-15budget-ci: Add support for Technotrend budget C-1501 dvb-c cardOliver Endriss
From: Sigmund Augdal <sigmund@snap.tv> The following experimental patch adds support for the technotrend budget C-1501 dvb-c card. The parameters used to configure the tda10023 demod chip are largely determined experimentally, but works quite for me in my initial tests. Signed-off-by: Sigmund Augdal <sigmund@snap.tv> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-06-05Fix INPUT dependency at budget-ciMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar <mingo@elte.hu> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30v4l: fix assorted compile warnings/errorsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-21 fix unaligned access in av7110.cMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 fix the roothole in av7110_av.cMauro Carvalho Chehab
From: Al Viro <viro@ftp.linux.org.uk> direct dereferencing from user-supplied address Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-18TDA10023: make few parameters configurableAntti Palosaari
From: Antti Palosaari <crope@iki.fi> - separate TDA10021 and TDA10023 attach - configurable Xtal settings - configurable input freq offset + baseband conversion type settings Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-05-06Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-05Optimizations galore: Blistering barnacles! The KNC1 and friendsManu Abraham
like 90 Mhz clock much better rather than running at a higher throttle, for almost similar hardware. he exact cause unknown, possibly due to a lower voltage applied for the demod power supply. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Initialize SYSREG registerManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-02-04Optimization, Fix a BugManu Abraham
* cut down some I/O operations by disabling "disable gate" * budget_av was left with the gate open, thereby more susceptible to RF interference due to I/O operations From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-27Select STB0899, STB6100, TDA8261 for budget_ci andManu Abraham
budget_av respectively. Thanks to Marco Schluessler <marco@lordzodiac.de> for pointing it out From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-26Code Review: #4 Consolidate configurationsManu Abraham
* Better readability * Avoids duplication Comments from Oliver Endriss <o.endriss@gmx.de> From: Manu Abraham <manu@linuxtv.org> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-01-18Initialize post process events to NULLManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-11-19Revert back previous change to 90MHzManu Abraham
Note: * At High Symbol Rates we do not have enouph machine cycles to handle the incoming symbols and hence might run into problems at the very end of the specified definition * Most of the equations have been calculated for a master clock of 99 MHz, running at 90MHz, raises lot of issues such as the need to recalculate all of them , which is eventually very painful. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Limit initial RF AGC gainManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Increment the AGC1 and AGC2 gain respectively, improves sensitivity slightlyManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-30Bug ID #19: Diseqc works properly at 90MHz only on Cut 1.1 and 2.0Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-25Add support for the Satelco Easywatch DVB-S2 PCI cardManu Abraham
From: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Arvo Jarve <arvo@softshark.ee> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Initialize at 90MHz itselfManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-18Deviation from the reference, pullup is 12k insteadManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-15Bug: Fix a typoManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-15We must wait for the PLL to stabilizeManu Abraham
Thanks to Peter for the in depth explanation From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-09DVB_ATTACH for STB0899, STB6100, TDA8261Manu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-05Fix tuner name and commentManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-04Bug: Missing reference clock definitionManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-10-04Bug! inverted logicManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-26Really silly bug, setting bandwidth into frequencyManu Abraham
probably should stop fiddling with code late nights. :-( Thanks to Marco for pointing it out and fixing it. From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-26Practical tests show that the TT S2 3200 has I/Q inputs inverted, similar to ↵Manu Abraham
the KNC1. Don't have this hardware and cannot verify this for myself, but from the reports this looks to be quite a reasonable and correct hypothesis. From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25the KNC1 and clones also don't have the I/Q inputs swappedManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25Fix the CA module not working issueManu Abraham
From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25TT S2 3200 shouldn't need Inversion ON and Inversion AUTO at the same timeManu Abraham
This is a racy situation. Inversion is default OFF on the TT S2 3200 hardware, unlike the KNC1 where it is default Inverted From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-25Code SimplificationManu Abraham
Use an enumeration for I/Q Swap rather than an int, easier to spot the nasty ones From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Still messing upManu Abraham
* Cleanup * Use KNC1's default settings to startup with * Add in tuner wrapper calls From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-10-24Initial support for the Technotrend TT S2 3200Manu Abraham
From: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Marko Schluessler <marco@lordzodiac.de> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2007-09-23Add initial support forManu Abraham
* KNC1 DVB-S2 Plus * KNC1 DVB-S2 OEM (known as Satelco DVB-S2) From: Manu Abraham <abraham.manu@gmail.com> Signed-off-by: Manu Abraham <manu@linuxtv.org>
2008-04-21merge: http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21merge: http://linuxtv.org/hg/~hhackmann/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-21budget: Support for Activy budget card with BSBE1 tunerOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60. Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner). Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-21stv0299: Fixed some typosOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Fixed some typos. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-10tda10086: make the xtal frequency a configuration optionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Some DVB-S boards, i.e. with the SD1878 tuner, use a 4 MHz reference frequency. This reqires a different setup of the clock PLL. This patch adds an enum to the tda10086_config struct and sets the proper values for the boards. This patch also fixes the DVB-S section of the MD7134_BRIDGE_2 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2008-04-09Adds selectable adapter numbers as per module optionMichael Krufky
From: Janne Grunau <janne-dvb@grunau.be> The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-11merge:http://linuxtv.org/hg/~endriss/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-09budget: Add support for Fujitsu Siemens DVB-T Activy BudgetOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Implement support for Fujitsu Siemens DVB-T Activy Budget, sub-system id 0x1131:0x5f61. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-09budget-av: Fix CI interface on (some) KNC1 DVBS cardsOliver Endriss
From: Christoph Pfister <pfister@linuxtv.org> Quoting the commit introducing reinitialise_demod (3984 / by adq): "These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend device when the CI module is reset." Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock. Signed-off-by: Christoph Pfister <pfister@linuxtv.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-09budget-av: Fix support for certain camsOliver Endriss
From: Christoph Pfister <pfister@linuxtv.org> The current ci implementation doesn't accept 0xff when reading data bytes (address == 0), thus breaks cams which report a buffer size of 0x--ff like my orion one. Remove the 0xff check altogether, because validation is really the job of a higher layer. Signed-off-by: Christoph Pfister <pfister@linuxtv.org> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2008-04-08media/dvb/ttpci replace remaining __FUNCTION__ occurrencesMichael Krufky
From: Harvey Harrison <harvey.harrison@gmail.com> __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Acked-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-04-13Support for DVB-S demod PN1010 (clone of S5H1420) addedPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> This device is a clone of the PN1010 used by SkyStar2 rev2.7 . This patch adds support for the flexcop-device and makes the driver look a little bit nicer. It needs to be checked whether the driver is still ok for the budget-cards. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-02-10tda10086: make the 22kHz tone for DISEQC a config optionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Some cards need the diseqc signal modulated, while some just need the envelope to control the LNB supply. This fixes Bug 9887 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Acked-By: Patrick Boettcher <pb@linuxtv.org> Acked-by: Oliver Endriss <o.endriss@gmx.de>
2008-01-30dvb-ttpci: Improved display of still picturesOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Improved display of still pictures (VIDEO_STILLPICTURE ioctl). Ensure that both fields are displayed for progressive frames. Thanks to Reinhard Nissl and Klaus Schmidinger for finding out that the FREEZE command does this. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Thanks-to: Reinhard Nissl <rnissl@gmx.de> Thanks-to: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de>
2008-01-30budget-av: Add support for Satelco EasyWatch PCI DVB-TOliver Endriss
From: Kim Sandberg <ksan@saunalahti.fi> Add support for Satelco EasyWatch PCI DVB-T, sub-id 0x1894:0x003a. Signed-off-by: Kim Sandberg <ksan@saunalahti.fi> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 16:53:23 +0000