| Age | Commit message (Collapse) | Author |
|---|
|
Endriss <o.endriss@gmx.de>
|
|
|
|
<o.endriss@gmx.de>)
|
|
|
|
|
|
the other files again.
|
|
- added fix for cards with hardware diseqc suggested by Peter Schildmann
- cleaned up the cards declaration and variables using preprocessor magic
|
|
(don't use 64bit ints in switch())
|
|
|
|
- clean up the mxb driver and it's helper modules (rename the
structures, add GPL license to the appropriate files, c99
initialisers)
- fix 2.5.55 "module insertion causes bug in kobject.o" issue
- fixed missing exported symbols in budget-core
|
|
can do this much better. We now simply register one pci driver for
every extension and are done with it -- if a device actually exists, the
pci subsystem calls us back. That's it.
Warning: this triggers a bug in the 2.5.x module subsystem -- you should
*not* use the driver.av7110 script and modprobe the driver. You can
a) build your kernel staticall
b) insert the modules one by one with *insmod*
I already filed a bug report to lkml.
Fixed a bug in Kconfig which prevented the saa7146 modules from being build.
|
|
|
|
testing why the !#+?§"1 TS stream stops and "debi oops" messages appear,
I found out that this is caused by the i2c irq handler. Don't ask me
why, but returning to the old code solved this mystery. Apparently, the
additional i2c interrupts caused some timing problems or the saa7146
is simply too f*cked up.
I left the code in however, it works for the analog MXB driver, so the
extension should decide if it should be used.
Removed some additional debug messages, which were commented out anyway.
|
|
recognized directly after system bootoup. This one got lost when
I cleanup up the attach()/detach() logic.
|
|
at all
- fixed most obvious flaws in budget.c, it's partially tested
(ie. module loads/unloads ok)
- added the "video part" to budget-av.c, it's partially tested
(ie. module loads/unloads ok, xawtv can access the video inputs)
|
|
2.5.x:
- exchanged the Kconfig files for "ttpci" and "ttpci-budget"
- removed the "SAA7146 based" from the card descriptions, but put
it to the remark some lines above
saa7146:
- simplified the probe(), attach(), detach() logic, since all
dvb devices can be identified by their subvendor/subdevice ids
av7110:
- added two wait_for_debi_done() calls in gpioirq(). (All other
IER_ENABLE() calls are preceded by wait_for_debi_done())
budget:
- budget.c has been split up into budget.c and budget-av.c. The latter
is for budget cards with analog video (av) inputs. Definitions are
now in budget.h. budget.c exports various functions that are used by
budget-av.c, too. The av code is currently missing, though, and needs
to be added.
unsorted:
- various c99 initializer cleanups
|
|
Thanks to Gregoire Favre <greg@ulima.unil.ch>
for reporting this.
|
|
(tested on 2.4.18 and 2.5.53 -- the budget driver is
untested, Holger will test it the next week)
saa7146:
- completely separated the saa7146 driver into a core-driver (saa7146.o) and
a video/vbi part (saa7146_vv.o). this allows you to build the budget driver
without av7110 and videodev bloat (see below)
The following thinks have been approved by Holger Waechtler:
av7110 (now ttpci):
- for 2.5.x: removed the av7110 directory and put everything into ttpci.
- removed all budget card support from this driver
- compile and build fixes for the saa7146 changes
ttpci-budget (new):
- for 2.5.x: created a new ttpci-budget directory, added a new driver for
the budget cards
mxb:
- compile and build fixes for the saa7146 changes
Changed the build and compile files for both 2.5.x and build-2.4 of course...
|
