| Age | Commit message (Collapse) | Author |
|---|
|
From: Aapo Tahkola <aet@rasterburn.org>
- hardware pid filtering no longer enabled unless in usb 1.x mode
- more responsive rc handling
- some minor bug fixes and code refolding
- m9206_write delay dropped (doesn't seem to be needed)
Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Steven Toth <stoth@hauppauge.com>
This patch enables generic bus arbitration callbacks enabling
dvbcore frontend_open and frontend_release to pass 'acquire'
and 'release' hardware messages back into the DVB bridge frameworks.
Frameworks like cx88 can then implement single bus multiple demod
card sharing features, which would prohibit two frontends from attempting
to use a single transport bus at the same time.
Signed-off-by: Steven Toth <stoth@hauppauge.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
qt1010 is a tuner used in some other devices, so this code should be put
into a separate file so that it could be reused by other drivers.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
update code to use dvb_attach()
update code to reflect recent changes to the dvb_usb framework
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Aapo Tahkola <aet@rasterburn.org>
Currently, the driver works in bulk mode supporting both USB 2.0 and
1.0 with and without hardware pid filters.
The ULi m9205 also supports isochronous transfer mode, but I have
dropped support for it because it depends on firmware and does not work
on all USB host chips. Further, I have no firmware with remote
controller support for this mode.
Signed-off-by: Aapo Tahkola <aet@rasterburn.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Tino Keitel <tino.keitel@tikei.de>
I noticed that udev does not create a symlink for the CinergyT2 remote input
device in /dev/input/by-id, which is required if I want to have a
unique device name for lircd.
The attached patch tries to achive this. However, udev still omits the
input device for /dev/input/by-id symlinks. I think something is still
not reported correctly.
Signed-off-by: Tino Keitel <tino.keitel@tikei.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Chris Rankin <rankincj@yahoo.com>
This patch writes the USB vendor and product IDs into the /sys/class/input/inputX/id/ files, so
that udev can find them. A rule like this does the trick for me:
KERNEL="event*", SYSFS{../id/vendor}=="2040", SYSFS{../id/product}=="9301",
SYMLINK+="input/dvb-remote"
Signed-off-by: Chris Rankin <rankincj@yahoo.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Fixed mt2060-usage with dvb_attach
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Corrected power control of the device for dual boards
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
When converting the dib3000mc-driver to dvb_attach I forgot to invert the check for NULL.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Removed compilation warnings for unused statics and locals
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Added a module parameter for force the activation of any LNA on a board.
Suggest by Steve Toth.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
- forward the clock to the slave undivided
- when sleeping the 3000 do not shutdown the clock
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
- make the timing frequency update work.
- fix AGC calibration for Nova-T 500
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Adding another USB product ID for the Nova-T 500. Reported by Jose Alberto Reguero.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Several fixes for dib0700-module. (Firmware error checking, dependency)
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
The fixed support for the VP70x (supports only StarBox2) is now in sync with
latest changes in the dvb-usb framework.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
This changeset finalizes the support of the Hauppauge Nova-T 500 (Dual DVB-T).
It adds correct AGC setting for the 3000P, correct firmware download state
detection.
Additionally it fixes the mt2060-driver to be able to be used with dvb_attach.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Added module for DiB0700 based USB devices. This module is preliminary and
untested (because of a lack of test devices) but should work.
Further commits will be necessary to make it work properly.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Changed the attach-function of the dib3000mc-driver to return only one
frontend. In case of multiple dib3000-chips on one board, one has to call the
i2c-enumeration manually before.
Added a field to Microtune 2060 config to output the clock to other
tuners/device on a board.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Forgot to add usb-urb.c which is new after adding support for multiple inputs
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Small fix for multi input for dtt200u module.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
Multi-input patch for DVB-USB device
From: Patrick Boettcher <pb@linuxtv.org>
This patch is the first commit of the Multiple Input Patch for the DVB-USB frame
work.
It changes the DVB-USB-device to be able to have more than one streaming input
(e.g. multiple DVB-T sources) on one device. This is a necessary feature for
the upcoming DiB7700 driven devices.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Oliver Endriss <o.endriss@gmx.de>
Implement fix suggested by Michael Hunold for a bug reported
by Philipp Matthias Hahn: Starting "kdetv" on a Siemens DVB-C 1.x
produced an oops because kdetv opened "/dev/vbi0".
Remove the V4L2_CAP_VBI_CAPTURE flag because it does not work with
this type of hardware anyway.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Oliver Endriss <o.endriss@gmx.de>
Do not select FW_LOADER unless it is really required.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
|
From: Jose Alberto Reguero <jareguero@telefonica.net>
While converting the configuration for the old DiB3000MC-module to the new one
a wrong AGC configuration was introduced.
This is using the old one again.
Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Alistair Buxton <a.j.buxton@gmail.com>
There seems to be an off by one error in the dibusb-mb.c which causes
the "Artec T1 with AN2235" box to be detected as a totally different
box - but it only happens if the Artec is one with the correct USB
IDs. A patch is attached to the second post. However, even with this
patch, the box still won't tune. It will tune using a 2.6.12 kernel
though.
Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Allan Third <allan.third@cs.man.ac.uk>
Attached is a patch against latest HG which adds remote control support
to the DigiTV driver. It works for me;
Signed-off-by: Allan Third <allan.third@gmail.com>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Andrew de Quincey <adq_dvb@lidskialf.net>
I've just determined that module-init-tools >=3.2 is needed for dvb_attach
to work. This adds a comment to Kconfig about it.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Andrew de Quincey <adq_dvb@lidskialf.net>
I had forgotten to add the wrapper round the tua6100_attach function if its
disabled in Kconfig
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Andrew de Quincey <adq_dvb@lidskialf.net>
Port budget-av to use the new tua6100 driver
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Andrew de Quincey <adq_dvb@lidskialf.net>
This driver was originally in budget-av.c, however I have extracted it into
a seperate file to permit reuse.
I also reworked the code to make it maintainable. I then examined the KNC1
windows drivers and rewrote the code in order to configure the PLL as they
do. This solves a lot of reported tuning problems.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: "Bradley Kite" <bradley.kite@gmail.com>
The cx22702 returns an 8 bit unshifted value for signal strength; this is
inconsistent with most other frontends
Signed-off-by: Bradley Derek Kite <bradley.kite@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Unai Uribarri <unaiur@gmail.com>
This patch fixes the physical address and takes into account recent
changes in the USB input subsystem.
Signed-off-by: Unai Uribarri <unaiur@gmail.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Trent Piepho <xyzzy@speakeasy.org>
The release callback was installed in ops.release, it should have been
ops.release_sec. This prevented to front-end release from getting
called.
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Still the pid_parse bit was erased.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
Matthieu Castet found that with the rewritten dib3000mc-driver the PID-parsing
was handled correctly. This changeset fixes it.
Thanks Matthieu
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Jochen Issing <jochen@isign-softart.de>
After some structural changes, here comes the updated patch for the Club 3D
zap250mini USB dvb device.
Adding support for a WideView-based device with a different "COLD" ID.
Signed-off-by: Jochen Issing <jochen.issing@isign-softart.de>
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Patrick Boettcher <pb@linuxtv.org>
merge from main
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From: Adrian Bunk <bunk@stusta.de>
The Coverity checker spotted the following "we dereference d->fe only
when we know it's NULL" bug:
<-- snip -->
...
static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d)
{
...
if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL) {
d->fe->ops.tuner_ops.init = dvb_usb_tuner_init_i2c;
d->fe->ops.tuner_ops.set_params = dvb_usb_tuner_set_params_i2c;
return -ENODEV;
}
...
<-- snip -->
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
|
|
From:
Christoph Pfister <christophpfister@gmail.com>
Apparently there are two types of knc1 dvb-s plus cards with different tuners
(as for the knc1 dvb-s ones). This patch adds support for those cards with
subsystem id 1894:0011.
Signed-off-by: Christoph Pfister <christophpfister@gmail.com>
Successfully tested by: Benjamin Weber <benny1990@gmail.com>
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Andrew de Quincey <adq_dvb@lidskialf.net>
This actually needs the same configuration as the other DVBC cards; simply
no one had managed to test before to find out.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
More register setup which improves the ZL10353's tuning characteristics.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Force parallel transport stream output on the ZL10353 attached to a
bluebird device.
Addresses the problem where a frontend lock was observed, but no MPEG
transport data was received.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
|
|
From: Oliver Endriss <o.endriss@gmx.de>
lnbp21 module must use fe->ops.release_sec, not fe->ops.release.
The release function of the frontend driver was never called for cards
with lnbp21...
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
|
