summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2008-01-25From: Olivier DANET <odanet at caramail.com>Patrick Boettcher
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET <odanet at caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25DiB0700: Start streaming the right wayPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25Fix some tuning problemsPatrick Boettcher
From: Soeren Moch <Soeren.Moch@stud.uni-hannover.de> The attached patch solves all my vdr tuning problems on a dib7000p nova-t stick as far as I could check within the last weekend. It disables streaming while tuning, like that the number of faulty TS packets is reduced. Signed-off-by: Soeren Moch <Soeren.Moch@stud.uni-hannover.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25[PATCH] Support for myTV.tPatrick Boettcher
From: Darren Salt <linux@youmustbejoking.demon.co.uk> Here's a roll-up which provides support for both this and the myTV.t. Signed-Off-By: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25Add support for WinTV Nova-T-CE driverPatrick Boettcher
From: Tim Taubert <ttmails@gmx.de> Add support for WinTV Nova-T-CE driver Signed-off-by: Tim Taubert <ttmails@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25fix autoserach in the Hauppauge NOVA-T 500Patrick Boettcher
From: Jose Alberto Reguero <jareguero@telefonica.net> This patch fix autoserach in the Hauppauge NOVA-T 500. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25[PATCH] ASUS My Cinema U3000 Mini DVBT TunerPatrick Boettcher
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-25Artec T14BR patchesPatrick Boettcher
From: Yousef Lamlum <yousef@youseflamlum.com> Added Artec T14BR support Signed-Off-By: Yousef Lamlum <yousef@youseflamlum.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-01-24xc5000: Fix OOPS caused by missing firmware.Steven Toth
From: Steven Toth <stoth@hauppauge.com> xc5000: Fix OOPS caused by missing firmware. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Acked-by: Steven Toth <stoth@hauppauge.com>
2008-01-20 ansonic branded dvb-t usb stick support in the af9005 driverMauro Carvalho Chehab
From: Luca Olivetti <luca@ventoso.org> Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by: Luca Olivetti <luca@ventoso.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-20merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-19tda18271: when tuning digital, the analog demod must be tri-statedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-15Finalise support for the Pinnacle HD 8000iSteven Toth
From: Steven Toth <stoth@hauppauge.com> Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-07 Cleans up error handling on or51xxx_attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> state is already NULL. Reviewed-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05xc5000: Small amount of cleanup and commenting.Steven Toth
From: Steven Toth <stoth@hauppauge.com> xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-05xc5000: Tuner analog supportSteven Toth
From: Steven Toth <stoth@hauppauge.com> From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-15s5h1409: Bug fix for parallel support.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-14merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-14tda18271: tda18271_cal_on_startup should be declared staticMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-14merge: http://linuxtv.org/hg/~mkrufky/pendingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-13tda18271: provide a choice whether to perform rf cal on init or on first tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-13tda18271: test RF_CAL_OK to see if we need additional RF calibrationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-13tda18271: put the device in standby mode during sleep()Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-11merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-10 av7110: fix section mismatchMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Fix driver data name to match whitelist of acceptable names that contain pointers init data so that section mismatch warning is placated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-10s5h1409: Ensure the silicon is initialized during attach.Steven Toth
From: Steven Toth <stoth@hauppauge.com> If not it impacts on analog tuner quality. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-08tda18271: give calibration debug a separate debug maskMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We don't usually want to see the calibration debug messages, but sometimes it is useful. Assign it to a separate debug mask. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-08tda18271: add support for fm radioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: report when the RF tracking filter calibration has completedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: share state between analog and digital tuner instancesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-06tda18271: use a mutex to protect state in critical sectionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: store frequency and bandwidth after successful tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store last tuned frequency & bandwidth after successful tune. Clean up tune functions -- remove pointer to tune function in state structure, instead call tune function based on priv->id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: clean up calibration initialization proceduresMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Always initialize registers during attach. Perform IR Calibration during init if needed. Perform RF Calibration during init if needed for C2, only. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-05tda18271: fix analog tuning regression caused by earlier changesetMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> An earlier patch, "tda18271: fail table lookups if frequency is out of range" broke analog support on certain hardware. This patch fixes that problem, by allowing the RF_CAL byte to be set to the maximum value, in cases of the frequency being out of range. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: document debug level and configuration parametersMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Document debug level module options and tda18271_config attach-time parameters. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: store IF frequency in a u16 instead of u32Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: allow device-specific configuration of IF frequency and std bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: move common code to tda18271-common.cMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move some common code to a new file to make this easier to look at. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add support for NXP TDA18271HD/C2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add MODULE_VERSIONMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> version 0.1 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: clean up function tda18271_set_analog_paramsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> make set_analog_params function look consistent with set_params function Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-29tda18271: fail table lookups if frequency is out of rangeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-28merge: http://www.linuxtv.org/hg/~stoth/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27xc5000: Removed erroneous definesSteven Toth
From: Steven Toth <stoth@hauppauge.com> Basic cleanup. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-25tda18271: break calculation functions out of tda18271_tuneMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Break out the following new functions from tda18271_tune: tda18271_calc_bp_filter tda18271_calc_km tda18271_calc_rf_band tda18271_calc_gain_taper tda18271_calc_ir_measure tda18271_calc_rf_cal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-25tda18271: improve printk macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24tda18271: consolidate table lookup functionsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24tda18271: move state structures to tda18271-priv.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24tda18271: fix whitespace in tda18271_ir_measureMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 03:11:40 +0000