summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2009-01-27merge: http://linuxtv.org/hg/~dheitmueller/dib0700-pbfixes/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-24af9015: New remote RM-KS for Avermedia Volar-XAntti Palosaari
From: Jose Alberto Reguero <jareguero@telefonica.net> The new Avermedia Volar-X is shipped with a new remote(RM-KS). The attached patch add a new option to the remote parameter of dvb_usb_af9015 for this remote. Priority: normal Signed-off-by: Felipe Morales Moreno <felipe.morales.moreno@gmail.com> Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-01-23af9015: remove dual_mode module paramAntti Palosaari
From: Antti Palosaari <crope@iki.fi> Remove dual_mode module param. Possible 2nd FE seems not to be buggy any more and therefore can be enabled as default. Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-01-20dib0700: Report dib0700_i2c_enumeration failuresDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Make it clear that a failure in dib0700_i2c_enumeration is a fatal condition and we cannot continue. If the failure occurs, do not attempt to attach to the tuner. Problem Noticed the issue when debugging an i2c issue a YUAN High-Tech STK7700PH for user Roshan Karki <roshan@olenepal.org>. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-01-20dib0700: fix i2c error message to make data type clearDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Make it clear that the address is in hex format. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-01-20dib0700: enable IR receiver in Nova TD usb stick (52009)Devin Heitmueller
From: Arne Luehrs <arne.luehrs@googlemail.com> Adds the IR data structure to the configuration datastructure of the Hauppauge WinTV Nova-TD USB stick (52009) Provided remote control is the same as theone provided with the Nova-T500 Card. Priority: normal Signed-off-by: Arne Luehrs <arne.luehrs@googlemail.com> Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-01-10Fix 'stb0899_get_srate' defined but not used warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-22merge: http://linuxtv.org/hg/~anttip/af9015/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-22merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-saa7146-2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-20af9015: bug fix: stick does not work always when pluggedAntti Palosaari
From: Antti Palosaari <crope@iki.fi> First control messages to the stick timeouts very often due to probable hw bug. Repeat first message few times if it fails as workaround. Priority: high Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-01-19av7110: test type field in VIDIOC_G_SLICED_VBI_CAPHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-18saa7146: convert to video_ioctl2.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The conversion to video_ioctl2 is the first phase to converting this driver to the latest v4l2 framework. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-13af9015: fix second FEAntti Palosaari
From: Antti Palosaari <crope@iki.fi> Bug causes 2nd FE MPEG TS buffer size to be zero and therefore no picture when 2nd FE was enabled. Configure correct buffer size also for 2nd FE. Priority: high Signed-off-by: Antti Palosaari <crope@iki.fi>
2009-01-13af9015: add new USB ID for KWorld DVB-T 395UAntti Palosaari
From: Antti Palosaari <crope@iki.fi> Add new USB ID 1b80:e39b for KWorld DVB-T 395U. This device revision does have Quantek QT1010 silicon tuner. Priority: normal Signed-off-by: Antti Palosaari <crope@iki.fi> Thanks-to: Ray Chen <swyear@gmail.com>
2009-01-07backport commit 9b4778f680aa79d838ae2be6ab958938f744ce5fMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Author: Harvey Harrison <harvey.harrison@gmail.com> trivial: replace last usages of __FUNCTION__ in kernel __FUNCTION__ is gcc-specific, use __func__ kernel-sync: Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-08backport changeset f41ced8f108cc80f16509b907cd7ac93944459bcMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Author: Laurent Pinchart <laurent.pinchart@skynet.be> Check fops_get() return value Several subsystem open handlers dereference the fops_get() return value without checking it for nullness. This opens a race condition between the open handler and module unloading. A module can be marked as being unloaded (MODULE_STATE_GOING) before its exit function is called and gets the chance to unregister the driver. During that window open handlers can still be called, and fops_get() will fail in try_module_get() and return a NULL pointer. This change checks the fops_get() return value and returns -ENODEV if NULL. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-08[PATCH] add Terratec Cinergy T Express to dibcom driverPatrick Boettcher
From: Yusuf Altin <yusuf.altin@t-online.de> This patch introduces support for dvb-t for the following dibcom based card: Terratec Cinergy T Express (USB-ID: 0ccd:0062) Priority: normal Signed-off-by: Yusuf Altin <yusuf.altin@t-online.de> Signed-off-by: Albert Comerma <albert.comerma@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2009-01-29dib0700: add data debug to dib0700_i2c_xfer_newMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Data debug for i2c transactions was provided by the functions called by dib0700_i2c_xfer_legacy, but not dib0700_i2c_xfer_new. This patch adds the missing data debug dumps to dib0700_i2c_xfer_new. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-01-06dm1105: Fix build with INPUT=m and DVB_DM1105=yMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> As reported by Randy Dunlap <randy.dunlap@oracle.com>: With CONFIG_INPUT=m and CONFIG_DVB_DM1105=y: drivers/built-in.o: In function `input_sync': dm1105.c:(.text+0x120c33): undefined reference to `input_event' drivers/built-in.o: In function `dm1105_emit_key': dm1105.c:(.text+0x120c6c): undefined reference to `input_event' dm1105.c:(.text+0x120c82): undefined reference to `input_event' dm1105.c:(.text+0x120cb2): undefined reference to `input_event' dm1105.c:(.text+0x120cd1): undefined reference to `input_event' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xd8ae): undefined reference to `input_allocate_device' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xd9f6): undefined reference to `input_register_device' drivers/built-in.o: In function `dm1105_ir_init': (.devinit.text+0xda09): undefined reference to `input_free_device' drivers/built-in.o: In function `dm1105_ir_exit': (.devexit.text+0xcde): undefined reference to `input_unregister_device' This is due to the lack of a dependency between dm1105 and CONFIG_INPUT Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> CC: Igor M. Liplianin <liplianin@me.by>
2009-01-05drivers/media: Fix a number of sparse warningsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> anysee.c:44:5: warning: symbol 'dvb_usb_anysee_delsys' was not declared. Should it be static? cx24116.c:378:3: warning: symbol 'CX24116_MODFEC_MODES' was not declared. Should it be static? stb0899_algo.c:57:5: warning: symbol 'stb0899_get_srate' was not declared. Should it be static? stb0899_algo.c:766:6: warning: symbol 'Log2Int' was not declared. Should it be static? stb0899_drv.c:137:20: warning: symbol 'stb0899_quant_tab' was not declared. Should it be static? stb0899_drv.c:180:20: warning: symbol 'stb0899_est_tab' was not declared. Should it be static? stb0899_drv.c:220:5: warning: symbol '_stb0899_read_reg' was not declared. Should it be static? budget-ci.c:1348:23: warning: symbol 'tt3200_stb6100_config' was not declared. Should it be static? /home/v4l/master/v4l/cx25840-core.c:190:6: warning: symbol 'cx25840_work_handler' was not declared. Should it be static? /home/v4l/master/v4l/m5602_s5k83a.c:116:6: warning: symbol 's5k83a_dump_registers' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-05dvb_frontend: Fix some sparse warnings due to static symbolsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> /home/v4l/master/v4l/dvb_frontend.c:838:19: warning: symbol 'dtv_cmds' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1035:6: warning: symbol 'dtv_property_dump' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1066:5: warning: symbol 'is_legacy_delivery_system' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1080:6: warning: symbol 'dtv_property_cache_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1132:6: warning: symbol 'dtv_property_legacy_params_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1187:6: warning: symbol 'dtv_property_adv_params_sync' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1222:6: warning: symbol 'dtv_property_cache_submit' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1253:5: warning: symbol 'dtv_property_process_get' was not declared. Should it be static? /home/v4l/master/v4l/dvb_frontend.c:1362:5: warning: symbol 'dtv_property_process_set' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-01add DVB_DEVICE_TYPE= to ueventMauro Carvalho Chehab
From: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02merge: http://linuxtv.org/hg/~mkrufky/tigerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31Add FE_CAN_2G_MODULATION flag to frontends that support DVB-S2Mauro Carvalho Chehab
From: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Report to userspace that cx24116 and stv0899 drivers support DVB-S2. Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-By: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-23Fix I2C bridge error in zl10353Mauro Carvalho Chehab
From: Dmitri Belimov <d.belimov@gmail.com> Fix I2C bridge error in zl10353 if no tunner attached to internal I2C bus of zl10353 chip. When set enable bridge from internal I2C bus to the main I2C bus (saa7134) the main I2C bus stopped very hardly. No any communication. In our next board we solder additional resistors to internal I2C bus. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-15sms1xxx: fix inverted gpio for lna control on tiger r2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The GPIO logic for LNA control on the Tiger r2 devices was inverted. This patch corrects the problem. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-27sms1xxx: add support for inverted gpioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> negative gpio values signify inverted polarity Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-24merge http://linuxtv.org/hg/~mkrufky/windhamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22sms1xxx: add USB suspend and hibernation supportMichael Krufky
From: Uri Shkolnik <uris@siano-ms.com> This patch provides USB suspend and hibernation support for Siano's SMS chipset based USB device Priority: normal Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable signal quality indicator LEDs on Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: fix invalid unc readingsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add function smsdvb_read_ucblocks to report uncorrectable error counts. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable LNA control on Hauppauge WinTV MiniCardMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Power the LNA while the frontend is in use. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: enable power LED on Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Enable power LED while the frontend is in use. Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-20af9015: fix compilation errorHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is much more readable to swap the byteorder in the switch rather than in each case statement. In addition, this fixes a compile error when compiled for 2.6.16. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-16sms1xxx: turn off LEDs after initialization of Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-16sms1xxx: add functions to configure and set gpioMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Priority: normal Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-22sms1xxx: add autodetection support for Hauppauge WinTV MiniCardMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> add USB IDs for Hauppauge WinTV MiniCard DVB-T Priority: high Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-21sms1xxx: use new firmware for Hauppauge WinTV MiniStickMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> New firmware image brings enhanced tuning performance. Firmware is available for download at the following location: http://www.steventoth.net/linux/sms1xxx Priority: high Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-11-20merge: http://linuxtv.org/hg/~anttip/af9015Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-17af9015: Add support for the Digittrade DVB-T USB Stick remoteAntti Palosaari
From: Alain Kalker <miki@dds.nl> Adds support for the Digittrade DVB-T USB Stick remote. As the Digittrade USB stick identifies itself as a generic Afatech AF9015 device, the remote cannot be autodetected. To enable it, add the following to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf: options dvb-usb-af9015 remote=4 Priority: normal Signed-off-by: Alain Kalker <miki@dds.nl> Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-11-16merge: http://linuxtv.org/hg/~pb/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-15Make dib0700 remote control support work with firmware v1.20Patrick Boettcher
From: Devin Heitmueller <devin.heitmueller@gmail.com> The format for reading the IR controller changed in firmware 1.20. It now provides the events on bulk endpoint 1 instead of using a control request. Support the new format, providing backward compatibility for users who might be using older firmware. Thanks to Patrick Boettcher <patrick.boettcher@desy.de> for providing the required information on how the version 1.20 firmware works. Priority: high Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2008-11-13af9015: don't reconnect device in USB-busAntti Palosaari
From: Jose Alberto Reguero <jareguero@telefonica.net> Don't reconnect device in the USB-bus. Reconnect command was not executed every time by device firmware and that causes harm. Reconnection is not needed so remove it. Priority: high Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Antti Palosaari <crope@iki.fi>
2008-11-14usb vendor_ids/product_ids are __le16Mauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> Noticed by sparse: drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-15dvb: cinergyt2 annotate struct endianness, remove unused variable, add staticMauro Carvalho Chehab
From: Harvey Harrison <harvey.harrison@gmail.com> All noticed by sparse: drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] <noident> drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] <noident> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Make sure the i2c gate is open before powering down tunerMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> It is not safe to assume that the i2c gate will be open before issuing the command to power down the tuner. In fact, many demods only open the gate long enough to issue the tuning command. This fix allows power management to work properly for those tuners behind an i2c gate (in my case the problem was with the HVR-950Q) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Put s5h1411 into low power mode at end of attach() callMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-16Make s2api work for ATSC supportMauro Carvalho Chehab
From: Devin Heitmueller <devin.heitmueller@gmail.com> ATSC should be considered a legacy delivery system, or else fields such as p->u.vsb.modulation do not get populated (resulting in set_frontend failures) CC: Steven Toth <stoth@linuxtv.org> Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12ttusb-dec: make it depend on PCIMauro Carvalho Chehab
From: Mike Frysinger <vapier@gentoo.org> Since ttusb_dec.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-12ttusb-budget: make it depend on PCIMauro Carvalho Chehab
From: Mike Frysinger <vapier@gentoo.org> Since dvb-ttusb-budget.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 20:28:02 +0000