summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2007-01-21dvb: add new qt1010 tuner moduleMichael Krufky
From: Antti Palosaari <crope@iki.fi> gl861: (MSI Megasky) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code au6610: (Sigmatek DVB-110) - hack for enable ZL10353 / QT1010 I2C gate - use new QT1010 module instead of old code Tested successfully with au6610 and gl861 devices against fi-Yllas frequencies. Now it locks perfectly with both devices. There is a "hack" to enable probable i2c gate in zl10535 demodulator. QT1010 doesn't respond to any i2c messages before we write 0x1a to demodulator register 0x62. In my understanding this should be fixed to demodulator code. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-05Initial support for Sigmatek DVB-110 DVB-TMichael Krufky
From: Antti Palosaari <crope@iki.fi> This patch adds driver for Sigmatek DVB-110 USB DVB-T stick. Stick has based on hardware of Qtuantek QT1010 tuner, Zarlink ZL10353 (Intel CE 6353) demodulator and Alcor Micro AU6610 DVB-T USB controller. HW is rather similar as used in MSI Megasky GL861. Currently, the driver works only in USB 2.0. In my understanding USB 1.1 is also supported by hw but I cannot test it due to lack of USB 1.1 port. Device supports only isochronous mode transfers. There is also eeprom in usb controller(at least in address range 0x80 - 0xbf) for storing data, eg. firmware. Anyway, firmware loading is not used / required by the device. There seems to be at least one unknown I2C device in address 0xa0, probably remote control or GPIO. Windows drivers reads registers from 0x00 to 0x07 from this unknown address. Driver is based on gl861 module. Tuner has a lot of problems to lock with megasky qt1010 module with this hardware with some broadcasting standards. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-09gl861: use parallel_tsMichael Krufky
From: Carl Lundqvist <comabug@gmail.com> - use parallel_ts - Now this driver works. - correct typo in MODULE_VERSION Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-09gl861: remove unneeded declaration of .generic_bulk_ctrl_endpointMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> generic_bulk_ctrl_endpoint isn't being used in this device, so this is not needed here. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07gl861: correct address of the bulk endpointMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> The megasky 580 based on gl861 has three endpoints: - 0x81 BULK/ISOC IN MPEG2 TS - 0x83 INT IN remote control receiver - 0x02 BULK OUT bulk control endpoint It doesn't look like the bulk endpoint is used, but better to have the correct one in the config. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07gl861: correct oops when loading moduleMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> This patch moves the DVB_USB_IS_AN_I2C_ADAPTER flag from the adapter properties to the device properties. Without this patch I get an OOPS when the gl861 driver tries to access any registers. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: whitespace cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: remove NULL entry from gl861_propertiesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: use qt1010_tuner_attach function from qt1010.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The gl861_tuner_attach function is not specific to this device. This patch removes gl861_tuner_attach, and replaces it with qt1010_tuner_attach from the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: remove unneeded "extern int" declarationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: hide disabled code from upstream patch systemMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> enclose disabled code inside an #if 0 block, instead of /* comments */ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: fix driver_nameMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> rename driver_name from "gl861" to "dvb_usb_gl861" Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: fix MODULE_AUTHORMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The author's email address is already in the MODULE_AUTHOR field. This patch adds his name as well. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03gl861: select DVB_ZL10353 if !DVB_FE_CUSTOMISEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03dvb-usb: rename USB_PID_MSI_MEGASKY55801 to USB_PID_MSI_MEGASKY580_55801Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03dvb-usb: initial support for MSI Mega Sky 580 DVB-T based on GL861Michael Krufky
From: Carl Lundqvist <comabug@gmail.com> This patch adds support for MSI Mega Sky 580 / GL861 DVB-T USB2.0 Notes: Except for the 2 lines added to zl10353.c, zl10353_reset_attach needs to be changed. If I read the code correctly setting parallel_ts will take care of the 3rd byte, but the 2nd byte needs to be 0x0b instead of 0x03 too. I guess these changes needs to be done only for this device, not sure how to do that. The zl10353 changes have been split apart from this patch, into the next patch, soon to follow. Signed-off-by: Carl Lundqvist <comabug@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-23m920x: move filter caps from device caps to adapter capsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move filter caps from device caps to adapter caps for the megasky driver. This fixes usb1.1 operation. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-23m920x: group tuner / demod callback functions togetherMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21whitespace / 80-column cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21m920x: Fix tuner identification bug with qt1010 moduleMichael Krufky
From: Aapo Tahkola <aet@rasterburn.org> Fixes qt1010 identification bug with megasky caused by the Quantek QT1010 tuner module patch. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21kconfig: qt1010 should be selected by m920xMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21dvb: add new qt1010 tuner moduleMichael Krufky
From: Antti Palosaari <crope@iki.fi> QT1010: - old qt1010-code totally rewritten and put in own kernel module - same enhancements as my earlier QT1010 125kHz patch - tuner initialization - register 1f calculation - register 20 calculation - register 25 calculation m920x: (MSI Megasky) - use new QT1010 module instead of old code Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07m920x: correct oops when loading moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> move .caps from the adapter properties to the device properties. Thanks to Martin Schwier for confirming this fix. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-07qt1010: correct hardlockup when an app access the DVB dongleMichael Krufky
From: Jan Nijs <jan.nijs@scarlet.be> This patch changes qt1010.h to use dvb_usb_device struct instead of a dvb_usb_adapter for accessing the private area of the driver. Without this patch my PC hard locks when an application tries to access the DVB tuner. Signed-off-by: Jan Nijs <jan.nijs@scarlet.be> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-03m920x: fix build in hg tree / other trivial fixesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - removed extra newline - removed NULL entry - fixed versions.txt Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: move qt1010_tuner_attach function into qt1010.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The megasky_tuner_attach function is not specific to this device. This patch renames it to qt1010_tuner_attach and moves it into the qt1010 header file. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: more trivial cleanupsMichael Krufky
From: Patrick Boettcher <patrick.boettcher@desy.de> - Removed some needless brances - Removed an unneeded check for adapter[0] - Removed unneeded declaration of .generic_bulk_ctrl_endpoint = 0x01 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-28m920x: more cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Some cleanups and suggestions from Patrick Boettcher. Dropped the mutex in m9206_rc_query using #if 0, because M9206_CORE, M9206_I2C, M9206_FILTER and M9206_FW can be accessed concurrently. Thanks to both Aapo Tahkola and Patrick Boettcher. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-27m920x: misc updates and fixesMichael Krufky
From: Aapo Tahkola <aet@rasterburn.org> - hardware pid filtering no longer enabled unless in usb 1.x mode - more responsive rc handling - some minor bug fixes and code refolding - m9206_write delay dropped (doesn't seem to be needed) Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: break out qt1010 tuner code into a separate fileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> qt1010 is a tuner used in some other devices, so this code should be put into a separate file so that it could be reused by other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: trivial cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: update megasky driver for recent changes in the dvb treeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> update code to use dvb_attach() update code to reflect recent changes to the dvb_usb framework Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23m920x: cleanups after rename from megasky.[ch]Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23dvb-usb: rename megasky.[ch] to m920x.[ch]Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-23dvb-usb: Initial support for MSI Mega Sky 580 based on Uli m9206Michael Krufky
From: Aapo Tahkola <aet@rasterburn.org> Currently, the driver works in bulk mode supporting both USB 2.0 and 1.0 with and without hardware pid filters. The ULi m9205 also supports isochronous transfer mode, but I have dropped support for it because it depends on firmware and does not work on all USB host chips. Further, I have no firmware with remote controller support for this mode. Signed-off-by: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-22proper vendor/device ID for the CinergyT2 input deviceMichael Krufky
From: Tino Keitel <tino.keitel@tikei.de> I noticed that udev does not create a symlink for the CinergyT2 remote input device in /dev/input/by-id, which is required if I want to have a unique device name for lircd. The attached patch tries to achive this. However, udev still omits the input device for /dev/input/by-id symlinks. I think something is still not reported correctly. Signed-off-by: Tino Keitel <tino.keitel@tikei.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21dvb-usb: Register the bus, vendor and product IDs for remote deviceMichael Krufky
From: Chris Rankin <rankincj@yahoo.com> This patch writes the USB vendor and product IDs into the /sys/class/input/inputX/id/ files, so that udev can find them. A rule like this does the trick for me: KERNEL="event*", SYSFS{../id/vendor}=="2040", SYSFS{../id/product}=="9301", SYMLINK+="input/dvb-remote" Signed-off-by: Chris Rankin <rankincj@yahoo.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-12budget-ci: add support for the Technotrend 1500 bundled remoteMichael Krufky
From: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> The keymap is based on a previous patch by Jussi Kukkonen. This remote is identified by subsystem_device id 0x1010. Signed-off-by: Ville-Pekka Vainio <vpivaini@cs.helsinki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-07bt8xx: add support for Ultraview DVB-T LiteMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-27Backport some changes that happened at mainstreamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Basic changes: - replaced i2c_bit_del_bus() to i2c_del_adapter(); - Fixed MODULE_AUTHOR on ov7670 - Updates on drivers not maintained on this tree: i2c-id.h and sound/* kernel-sync: drivers/media/dvb/pluto2/pluto2.c | 8 ++++---- drivers/media/video/bt8xx/bttv-i2c.c | 6 +----- drivers/media/video/cx88/cx88-core.c | 2 +- drivers/media/video/cx88/cx88-vp3054-i2c.c | 2 +- drivers/media/video/ov7670.c | 2 +- drivers/media/video/vino.c | 2 +- drivers/media/video/zoran_card.c | 2 +- include/linux/i2c-id.h | 18 ++++++------------ sound/pci/bt87x.c | 4 ++-- Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-26DVB: Remove unneeded void * casts in ttpci/av7110Mauro Carvalho Chehab
From: Tobias Klauser <tklauser@distanz.ch> The patch removes unneeded void * casts for the following (void *) pointers: - struct file: private_data - struct dvb_device: priv - struct dvb_demux: priv - struct dvb_adapter: priv The patch also contains some whitespace and coding style cleanups in the relevant areas. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-20[PATCH] Cablestar2 supportPatrick Boettcher
From: Antti Seppälä <ajhseppa@niksula.hut.fi> This patch changes the initialization of alps tdee4 tuner in flexcop-fe-tuner.c to match what is used in the old driver that was written specifically for Cablestar cards by Patrick Boettcher. This patch should make Cablestar2 work again with recent dvb drivers without breaking other stv0297 based cards. Signed-off-by: Antti Seppälä <ajhseppa@niksula.hut.fi> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-20[PATCH] DIB3000MC and NOVA T USB2 #2Patrick Boettcher
From: Mario Rossi <mariofutire@googlemail.com> Second part of the patch to make the autosearch work again with DiB3000P/MC. Signed-off-by: Mario Rossi <mariofutire@googlemail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-12-16Two small differences between v4l-dvb and kernel mainstream treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Several stuff backported from 2.6.19-git seriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> - INIT_WORK replaced by INIT_DELAYED_WORK - struct work_struct replaced by struct delayed_work - callback parameters also changed - SLAB_KERNEL replaced by GFP_KERNEL - linux/suspend.h replaced by linux/freezer.h - on cpia: INIT_WORK replaced by INIT_WORK_NAR - file->f_dentry->d_inode replaced by file->f_path.dentry->d_inode Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Backported several changes from kernel 2.6.19-git seriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Main changes: - There were several checks for usb release routines that were removed, since the routine itself checks for null values: usb_free_urb, usb_kill_urb, usb_unlink_urb Should be checked if this really happens on older kernels. - updated sound/oss/btaudio.c - replaced SLAB_ATOMIC to GFP_ATOMIC Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-16Backporting some typo fixes from kernelMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-14dvb-core: fix printk type warningMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> dvb_net.c: In function 'dvb_net_ule': dvb_net.c:628: warning: format '%#lx' expects type 'long unsigned int', but argument 3 has type 'u32' dvb_net.c:628: warning: format '%#lx' expects type 'long unsigned int', but argument 4 has type 'u32' Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-14dvb-core: fix bug in CRC-32 checking during ULE decapsulation on 64-bit systemsMichael Krufky
From: Ang Way Chuang <wcang@nrg.cs.usm.my> CRC-32 checking during ULE decapsulation always failed on x86_64 systems due to the size of a variable used to store CRC. This bug was discovered on Fedora Core 6 with kernel-2.6.18-1.2849. The i686 counterpart has no such problem. This patch has been tested on 64-bit system as well as 32-bit system. Signed-off-by: Ang Way Chuang <wcang@nrg.cs.usm.my> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-13getting rid of all casts of k[cmz]alloc() callsMauro Carvalho Chehab
From: "Robert P. J. Day" <rpjday@mindspring.com> Run this: ============== cut here ============== for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. kernel-sync: Signed-off-by: Andrew Morton <akpm@osdl.org> CC: v4l-dvb maintainer list <v4l-dvb-maintainer@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-24 09:13:42 +0000