summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2006-12-04budget-av, budget-ci: Fix MC1 register programmingOliver Endriss
From: Hartmut Birr <e9hack@gmail.com> Remove bogus read during MC1 programming. A '1' bit could never be cleared using the old code. Use MASK_xx macros. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-12-03budget-ci: Use SAA7146_IER_ENABLE/DISABLE to enable or disable a hardware ↵Oliver Endriss
interrupt From: Hartmut Birr <e9hack@gmail.com> Use SAA7146_IER_ENABLE/DISABLE to enable or disable a hardware interrupt. Signed-off-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-11-03budget-av: Add delay for frontend power-onOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> Added a delay to give the frontend a little bit time for power-on. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-11-01av7110,budget,budget-ci,budget-av: Use interrupt mode for I2C transfersOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Use interrupt mode for I2C transfers. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-12-01merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-28gentree.pl script can't handle # if. Should be, instead #ifMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-28merge: http://linuxtv.org/hg/~mkrufky/lgdt330xMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-28lgdt330x: fix broken whitespaceMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-28lgdt330x: fix signal / lock status detection bugMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> In some cases when using VSB, the AGC status register has been known to falsely report "no signal" when in fact there is a carrier lock. The datasheet labels these status flags as QAM only, yet the lgdt330x module is using these flags for both QAM and VSB. This patch allows for the carrier recovery lock status register to be tested, even if the agc signal status register falsely reports no signal. Thanks to jcrews from #linuxtv in irc, for initially reporting this bug. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-24dvb-usb: fix vendor ID orderingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The vendor IDs in this file were all in alphabetical order except for this one. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-24Remove stray IR code left from patchsetAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> This caused compilation to fail - completely replaced by new style functions, so can be removed. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22Fix TD1316 tuner for DVBCAndrew de Quincey
From: Thomas Kaiser <linux-dvb@kaiser-linux.li> If your device is using the philips tda1316 tuner, i think there is a problem in setting the correct Band. 162 MHz and above should be band 2 (Mid-Band). But in dvbc_philips_tdm1316l_tuner_set_params band 1 is set for frequencies below 200 MHz. Signed-off-by: Thomas Kaiser <linux-dvb@kaiser-linux.li> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 8/8] budget-ci IR: make debounce logic conditionalAndrew de Quincey
Change the debounce logic so that it is not used at all unless the debounce parameter has been set. This makes for a much "snappier" remote for most users as there is no timeout to wait for (the debounce logic has a 350ms timer for the next repeat, but with the RC5 protocol, one event per ~110ms is possible) Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 7/8] budget-ci IR: add IR debugging informationAndrew de Quincey
This adds a ir_debug parameter which is useful in tracking down IR decoding problems. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 6/8] budget-ci IR: decode rc5 device byteAndrew de Quincey
Decode the RC5 device byte as well as the command byte. Introduce a parameter to set the device events to listen for. Default to try to auto-detect the proper device code, otherwise, listen to any device as the old code did. Based on Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 5/8] budget-ci IR: integrate with ir-commonAndrew de Quincey
This converts the budget-ci driver so that it uses ir-common for some of its IR processing. In particular, the keymap for the Nova-T (sub 13c2:1011) is switched to the Hauppauge grey/black keymap, of which the keys on the supplied R808 remote control form a subset. The old budget-ci keymap is moved to ir-keymaps.c and is used for other remotes. The debounce logic for buggy remotes (i.e. Zenith) is made conditional the new debounce parameter and defaults to off (so that repeat keypresses aren't ignored for all working remotes). Some parts are based on Darren Salt's dvb-ir patchset. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 4/8] budget-ci IR: be more verbose in case of init failureAndrew de Quincey
Trivial change to help the user understand what went wrong. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 3/8] budget-ci IR: improve error checking in init and deinit functionsAndrew de Quincey
Improve the error checking in the IR init and deinit functions. Based on Darren Salt's dvb-ir patchset. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 2/8] budget-ci IR: support EVIOCGPHYSAndrew de Quincey
This patch adds a 'phys' string, of the same form as used by various other DVB cards' IR drivers, for access by any program which uses the EVIOCPHYS ioctl or may read /sys/class/input/*/phys (e.g. udev) to identify input device nodes. Taken from Darren Salt's dvb-ir patchset. Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22[PATCH 1/8] budget-ci IR: groundwork for following patchesAndrew de Quincey
This patch lays down some groundwork for later budget-ci patches. The bulk of this consists of moving a few members into a new struct and renaming a few of them. It also allocates extra space for the device name (the "name" field in /proc/bus/input/devices and in the relevant sysfs dir) to avoid truncation and uses snprintf rather than sprintf in case the extra space shouldn't be enough. Taken from Darren Salt's dvb-ir patchset Signed-off-by: Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22Fix oops on symbol rate==0Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> The tda10086 causes an oops (divide by zero) if a zero symbol rate is used; this prevents this. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-22Correct budget.c permissionsAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> budget.c permissions seem to have accidentally been changed to executable - this removes that Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-21merge: http://linuxtv.org/hg/~mkrufky/dvb-pllMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-21adding support for 400e (forgot the files :) )Patrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> adding files is sometimes better Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-11-21TDA826x I2C read with 2 messagesPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Added a dump I2C message to the TDA826x-driver to fix I2C read for identification with ttusb2-driver. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-11-21Adding support for Pinnacle PCTV 400e DVB-SPatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> Adding support for Pinnacle PCTV 400e DVB-S. The module name is called ttusb2, because it this device (and other Pinnacle devices) is using the USB-protocol originally used by Technotrend device. I'm suspecting Technotrend as the device-designer. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-11-20lgh06xf: use return value of dvb_pll_configure() to fill priv->frequencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> In lgh06xf_set_params: Rename int variable "err" to "result". Remove needless calculation of the set frequency, since this value is now being returned by dvb_pll_configure(). Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-20dvb-pll: return frequency set by dvb_pll_configure()Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch removes some duplicated code by returning the frequency set by dvb_pll_configure(), instead of recalculating it again in dvb_pll_set_params() and dvb_pll_calc_regs(). If the return value of dvb_pll_configure is less than zero, it is an error code. Otherwise, the return value is the frequency actually set by the function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-20whitespace cleanupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - adhere to 80-column limit - replace some spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-20merge: http://linuxtv.org/hg/~quincy/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-20Handle errors from input_register_device()Mauro Carvalho Chehab
From: Dmitry Torokhov <dtor@insightbb.com> Also sprinkled some input_sync() throughout the code. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Ricardo Cerqueira <v4l@cerqueira.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-19lgh06xf: fix compiler error when not selectedMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> fix build error: lgh06xf.h:29: error: syntax error before '{' token Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-19drivers/media/dvb/frontends: kfree() cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We don't have to check for NULL before kfree() Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-19create new lgh06xf atsc tuner moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-19Support KNC1 DVBC cards with alternative tda10021 i2c addressAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> For some reason, some of these cards have the tda10021 configured to a different address. This adds support for such cards Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-19budget: diseqc_method module parameter for cards with subsystem-id 13c2:1003Oliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> New module parameter diseqc_method for cards with subsystem-id 13c2:1003. - 0: unreliable method, can be used by all board revisions (default) - 1: reliable method, works for newer board layouts only The parameter has no effect for cards with other subsystem-ids. Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-11-17merge: http://linuxtv.org/hg/~hhackmann/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-17Patch for SATELCO EasyWatch PCI (DVB-C)Andrew de Quincey
From: Thomas Hamm <thhamm@t-online.de> Add support for Satelco EasyWatch PCI DVBC cards Signed-off-by: Thomas Hamm <thhamm@t-online.de> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-17Fix uninitialised variable in dvb_frontend_swzigzagAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Spotted by coverity/Adrian Bunk. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-16Fix tuning on older budget DVBS cards.Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Fixes to DISEQC on these cards inadvertently broke normal tone/voltage signalling. This restores the necessary function. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-11-16Added support for the Terratec Cinergy HT PCMCIA moduleHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This is a hybrid cardbus module. Besides the card support, i modified the definition names for AGC and GPIO of the tda10046. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-11-14Add alternative device ID (0xb808) for AverMedia AverTV Volar dongles.Patrick Boettcher
From: Jose Carlos Garcia Sogo <jsogo@debian.org> Add alternative device ID (0xb808) for AverMedia AverTV Volar dongles. Signed-off-by: Jose Carlos Garcia Sogo <jsogo@debian.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-11-12dib0700: Add support for new revision of Nova-T StickMichael Krufky
From: Stefan Traby <stefan@hello-penguin.com> Added support for Nova-T Stick with USB-pid: 0x7060 Signed-off-by: Stefan Traby <stefan@hello-penguin.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-09flexcop-usb: fix debug printkMichael Krufky
From: Alexey Dobriyan <adobriyan@gmail.com> .. fix debug printk. Why, oh why, one would want to do (u16 & 0xff) << 8 and print it with %02x format? Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-08dib0700: Add support for Leadtek Winfast DTV Dongle (STK7700P based)Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch adds support for the new, STK7700-based revision of the Leadtek Winfast DTV Dongle. Signed-off-by: Michal CIJOML Semler <cijoml@volny.cz> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-03tda826x: use correct max frequencyMauro Carvalho Chehab
From: Alexey Dobriyan <adobriyan@gmail.com> sparse "defined twice" warning Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-02dvb: dibx000_common-fixMauro Carvalho Chehab
From: Andrew Morton <akpm@osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-31merge: http://linuxtv.org/hg/~mkrufky/lgdt330xMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-31tda8083: support for uncorrectable blocks and bit error rateOliver Endriss
From: Christoph Haubrich <christoph1.haubrich@arcor.de> Copied routines for uc blocks and BER from the removed tda80xx.c into tda8083.c. Signed-off-by: Christoph Haubrich <christoph1.haubrich@arcor.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2006-10-31budget-ci: Inversion setting fixed for Technotrend 1500 TOliver Endriss
From: Raymond Mantchala <raymond.mantchala@streamvision.fr> Technotrend 1500 T card have "inverted inversion". This patch fixes that. Many thanks to Martin Zwickel from Technotrend for his confirmation and correction proposal. Signed-off-by: Raymond Mantchala <raymond.mantchala@streamvision.fr> Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr> Thanks-to: Martin Zwickel <martin.zwickel@technotrend.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 14:27:26 +0000