summaryrefslogtreecommitdiff
path: root/linux/drivers/media/dvb
AgeCommit message (Collapse)Author
2007-11-19zl10353: calculate input frequency register instead of using hardcoded valueChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Now we know the zl10353's correct ADC clock, we can calculate the input frequency registers correctly instead of just blindly setting them. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19zl10353: fix default adc_clock and TRL nominal rate calculationChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> The default adc_clock for the zl10353 is different from what was originally thought to be the case and the TRL nominal rate formula was incorrect as a result. Use a better (and hopefully now correct) formula. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19zl10353: Improve support for boards without a tuner on secondary i2cChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Issue FSM_GO instead of TUNER_GO if there is no tuner attached to the secondary i2c bus. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19CXUSB: handle write then read from different addressChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> The path to perform a read immediately after a write was not checking that the address being read from was the same as the one that was written. Handling this case correctly should mean that we now can handle more than two i2c messages at a time. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19CXUSB: support only-read i2c requestsChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Any i2c read request that was not immediately preceded by a write request was incorrectly taking the write path. Add the capability to handle individual read requests. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19CXUSB: i2c transfer failure notificationChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> The i2c master_xfer routine should return a negative result if not all transfers completed successfully. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-19CXUSB: return control message transfer result to callerChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Callers to cxusb_ctrl_msg currently do not receive any indication that their transfer failed. Return the true return code from dvb_usb_generic_{rw,write}. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-22tda827x: prevent possible NULL pointer dereference in tda827xa_lna_gainMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If tda827x_config hasn't been defined, exit the function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-11-18tda827x: fix NULL pointer dereference during tda827x_probe_versionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix the following oops: [ 750.807586] CPU: 1 [ 750.807587] EIP: 0060:[<f9dde2a3>] Tainted: P VLI [ 750.807589] EFLAGS: 00010296 (2.6.22-14-generic #1) [ 750.807599] EIP is at tda827x_probe_version+0xc3/0x130 [tda827x] [ 750.807603] eax: 00000000 ebx: f5a45a00 ecx: 00000000 edx: 00000001 [ 750.807607] esi: f9de05ac edi: e9b897e0 ebp: ed8015ac esp: ed735f58 [ 750.807611] ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 [ 750.807615] Process kdvb-fe-1 (pid: 10662, ti=ed734000 task=d3b76530 task.ti=ed734000) [ 750.807618] Stack: f9e23972 00000038 ed735fd0 00010060 41ae0001 ed735f73 88b89608 e9b89608 [ 750.807629] e9b89608 ed801400 f9dde338 e9b89608 f9b2a46b 000000ae 00000a18 d3b76640 [ 750.807639] fffffffc f9b2bad6 00000003 f4433e68 e962b8c0 f4433e64 00000292 ed735fd0 [ 750.807649] Call Trace: [ 750.807653] [<f9e23972>] tda10046_init+0x2d2/0x6c0 [tda1004x] [ 750.807700] [<f9dde338>] tda827x_initial_init+0x8/0x20 [tda827x] [ 750.807713] [<f9b2a46b>] dvb_frontend_init+0x2b/0x60 [dvb_core] [ 750.807745] [<f9b2bad6>] dvb_frontend_thread+0x66/0x2f0 [dvb_core] [ 750.807780] [complete+64/96] complete+0x40/0x60 [ 750.807805] [<f9b2ba70>] dvb_frontend_thread+0x0/0x2f0 [dvb_core] [ 750.807822] [kthread+66/112] kthread+0x42/0x70 [ 750.807828] [kthread+0/112] kthread+0x0/0x70 [ 750.807841] [kernel_thread_helper+7/16] kernel_thread_helper+0x7/0x10 [ 750.807869] ======================= [ 750.807872] Code: 8b 74 24 20 8b 7c 24 24 83 c4 28 c3 8b 0d 00 0c de f9 85 c9 75 42 be e0 04 de f9 81 c7 0c 01 00 00 b9 33 00 00 00 f3 a5 8b 43 08 <c7> 40 14 50 e3 dd f9 8b 5c 24 1c 31 c0 8b 74 24 20 8b 7c 24 24 [ 750.807925] EIP: [<f9dde2a3>] tda827x_probe_version+0xc3/0x130 [tda827x] SS:ESP 0068:ed735f58 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-11-19 drivers/media/dvb: Add missing "space"Mauro Carvalho Chehab
From: Joe Perches <joe@perches.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-12Adding support for VHF with MT2266-devicesMauro Carvalho Chehab
From: Olivier DANET <odanet@caramail.com> MT2266 : - support for VHF - Minor enhancements Signed-off-by: Olivier DANET <odanet@caramail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-10Gigabyte u7000 usb dvb-t supportPatrick Boettcher
From: dominik <dominik95@free.fr> Signed-off-by: dominik <dominik95@free.fr> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-11-10[PATCH] Leadtek Winfast DTV Dongle remote controlPatrick Boettcher
From: Jaroslav Barton <djaara@djaara.net> Add remote controller support for Leadtek Winfast DTV Dongle based on DiB7700P, MT2060 and using last drivers (6040:6a79c243aecc), firmware dvb-usb-dib0700-03-pre1.fw Signed-off-by: Jaroslav Barton <djaara@djaara.net> Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-11-08Fix bug #8824: Correct support for Diseqc on tda10086Mauro Carvalho Chehab
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This is a modified version of a patch previously posted by Thomas Unverzagt. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 usb: make some debug vars staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch makes some needlessly global debug variables static. opera1.h became so small that I removed it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 unexport flexcop_reset_block_300Mauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 usb/vp702x.c: cleanupsMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch contains the following cleanups: - make the needlessly global vp702x_usb_out_op() static - #if 0 the unused vp702x_power_ctrl() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 usb/gp8psk.c: #if 0 gp8psk_bcm4500_reload()Mauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch #if 0's the unused gp8psk_bcm4500_reload() Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 core/dvb_ringbuffer.c: remove unused exportsMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch removes the following unused EXPORT_SYMBOL's: - dvb_ringbuffer_flush - dvb_ringbuffer_pkt_write - dvb_ringbuffer_pkt_read - dvb_ringbuffer_pkt_dispose - dvb_ringbuffer_pkt_next Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-05 bt8xx/dst.c: make code staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch makes the following needlessly global code static: - dst_gpio_outb() - dst_gpio_inb() - rdc_8820_reset() - dst_pio_enable() - dst_command() - struct tuner_list[] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06Move check before lockMauro Carvalho Chehab
From: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> CC: Antti Palosaari <crope@iki.fi> CC: Carl Lundqvist <comabug@gmail.com> CC: Aapo Tahkola <aet@rasterburn.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport commit e42837bcd35b75bb59ae5d3e62f87be1aeeb05c3Mauro Carvalho Chehab
kernel-sync: Author: Rafael J. Wysocki <rjw@sisk.pl> Date: Thu Oct 18 03:04:45 2007 -0700 freezer: introduce freezer-friendly waiting macros Introduce freezer-friendly wrappers around wait_event_interruptible() and wait_event_interruptible_timeout(), originally defined in <linux/wait.h>, to be used in freezable kernel threads. Make some of the freezable kernel threads use them. This is necessary for the freezer to stop sending signals to kernel threads, which is implemented in the next patch. From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport changeset 1977f032722c27ee3730284582fd3991ad9ac81bMauro Carvalho Chehab
kernel-sync: Author: Jiri Slaby <jirislaby@gmail.com> Date: Thu Oct 18 23:40:25 2007 -0700 remove asm/bitops.h includes remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport changeset 7b19ada2ed3c1eccb9fe94d74b05e1428224663dMauro Carvalho Chehab
kernel-sync: Author: Jiri Slaby <jirislaby@gmail.com> Date: Thu Oct 18 23:40:32 2007 -0700 get rid of input BIT* duplicate defines get rid of input BIT* duplicate defines use newly global defined macros for input layer. Also remove includes of input.h from non-input sources only for BIT macro definiton. Define the macro temporarily in local manner, all those local definitons will be removed further in this patchset (to not break bisecting). BIT macro will be globally defined (1<<x) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport changeset 3a4fa0a25da81600ea0bcd75692ae8ca6050d165Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Author: Robert P. J. Day <rpjday@mindspring.com> Date: Fri Oct 19 23:10:43 2007 +0200 Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-02backport changeset 96de0e252cedffad61b3cb5e05662c591898e69aMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Author: Jan Engelhardt <jengelh@gmx.de> Date: Fri Oct 19 23:21:04 2007 +0200 Convert files to UTF-8 and some cleanups * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-31compat: a number of dvb frontends didn't include compat.hTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-10-31ttpci: Rework Kconfig menus and MakefileTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The ttpci Kconfig file has bugs that cause it to fail in certain Kconfig situations. The basic problem is that it selects certain drivers, but does not depend on the dependencies of those drivers. See http://article.gmane.org/gmane.comp.video.video4linux/35072 Using the Kconfig file also has some annoyances. For instance one can't turn off AV7110 support unless you go down several options and first turn off budget-patch support. Normally user selectable drivers are not forced on like this. The "AV7110 cards with Budget Patch" option is disabled if "Budget cards" isn't on. Normally a driver appears nested under a driver it depends on, but since drivers that don't depend on "Budget cards" are between the two options, the config programs can't display the tree correctly. The Makefile has an issue too. Some modules, ttpci-eeprom and budget-core, appear in the Makefile under several different config symbols. If more than one of these symbols is on, they will get added the to list of objects multiple times. The normal convention is to have a config symbol just the common object(s) and have the users of the that object either depend on or select that config symbol. This patch fixes all these issues. ttpci-eepom is under a new config symbol, and so is the budget-core module. The four different budget card types appear as sub-drivers under a main "SAA7146 DVB cards" option. Turning on budget-patch doesn't force AV7110. Drivers using SAA7146_VV have the necessary VIDEO_DEV dependency, so that it isn't possible to select SAA7146_VV without V4L being on. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-10-31stv0297: Signal strength fixesOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> Fixes the signal strength value (higher value = higher signal strength) and scales the value to the range of 0..ffff. The characteristic itself is wrong. To get proper values on a TT-C2300 in the range of 40..60% real signal strength, the values from the patch should be divide by two. The attached patch doesn't fix the characteristic. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-10-31tda10021: Fix reported signal strengthOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> Fix reported signal strength value (higher value = higher signal strength). Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-10-31tda10021: Bit error counting fixedOliver Endriss
From: Hartmut Birr <e9hack@googlemail.com> Bit error counting fixed for the tda10021. Signed-off-by: Hartmut Birr <e9hack@googlemail.com> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-10-31ves1820: Change the acquisition range for clock recovery from 120 ppm to 240ppmOliver Endriss
From: Oliver Endriss <o.endriss@gmx.de> Change the acquisition range for clock recovery from 120 ppm to 240ppm. Apparently, some cable providers in Germany are playing with their parameters, and the capture range of the ves1820 is too small to acquire a lock with the current setting... ;-( Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-10-31saa7146/budget*/dvb-ttpci: Remove V4L1 codeOliver Endriss
From: Marco Schluessler <marco@lordzodiac.de> Remove V4L1 code. Signed-off-by: Marco Schluessler <marco@lordzodiac.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
2007-10-29 use input functions, should depend on INPUTMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-24tda18271: clean up i2c_gate handlingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Call analog_demod_ops->i2c_gate_ctrl when in analog tuning mode, and frontend_ops.i2c_gate_ctrl when in digital tuning mode. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/Makefile | 1 linux/drivers/media/dvb/frontends/tda18271.c | 33 ++++++++++++++++++++------- 2 files changed, 26 insertions(+), 8 deletions(-)
2007-10-24tda18271: clean up debug macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda18271.c | 76 ++++++++++++--------------- 1 file changed, 35 insertions(+), 41 deletions(-)
2007-10-22move std if setting from tda8290 to tda827xMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda827x.c | 61 +++++++++++++++++++++++++--- linux/drivers/media/dvb/frontends/tda827x.h | 3 - linux/drivers/media/video/tda8290.c | 20 --------- 3 files changed, 57 insertions(+), 27 deletions(-)
2007-10-21dvb_frontend: codingstyle cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> thanks to checkpatch.pl Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
2007-10-21tuner: move analog_demod_priv into struct dvb_frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 1 linux/drivers/media/video/tda8290.c | 40 ++++++++++++------------ linux/drivers/media/video/tda9887.c | 14 ++++---- linux/drivers/media/video/tuner-core.c | 11 ------ linux/drivers/media/video/tuner-driver.h | 1 5 files changed, 29 insertions(+), 38 deletions(-)
2007-10-21tuner: move analog_tuner_ops into dvb_frontend_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 3 linux/drivers/media/video/tda8290.c | 8 +- linux/drivers/media/video/tda9887.c | 4 - linux/drivers/media/video/tuner-core.c | 91 +++++++++++++----------- linux/drivers/media/video/tuner-driver.h | 4 - 5 files changed, 63 insertions(+), 47 deletions(-)
2007-10-22tda8290: add support for NXP TDA18271 tuner and TDA8295 analog demodMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add basic support for NXP TDA8295 analog demod and TDA18271 tuner silicon. TDA8295 + TDA8275a not yet tested. TDA8290 + TDA18271 not yet supported. Digital mode of TDA18271 not yet tested & needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.tuner | 1 linux/drivers/media/Kconfig | 3 linux/drivers/media/dvb/frontends/Kconfig | 7 linux/drivers/media/dvb/frontends/Makefile | 1 linux/drivers/media/dvb/frontends/tda18271.c | 1062 +++++++++++++++++++++++++ linux/drivers/media/dvb/frontends/tda18271.h | 40 linux/drivers/media/video/tda8290.c | 339 +++++++ linux/drivers/media/video/tda8290.h | 8 linux/drivers/media/video/tuner-core.c | 5 linux/drivers/media/video/tuner-types.c | 3 linux/drivers/media/video/tveeprom.c | 2 linux/include/media/tuner.h | 2 v4l/versions.txt | 2 13 files changed, 1467 insertions(+), 8 deletions(-)
2007-10-21tda827x: fix GPL export on attach functionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> EXPORT_SYMBOL should have been EXPORT_SYMBOL_GPL Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/frontends/tda827x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2007-08-25Move all tda8275/8275a tuning code from tda8290 module into tda827x moduleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add analog tuning support to tda827x dvb_frontend tuner module. Convert tda8290 module back to native tuner interface. The tda8290 analog demodulator will be handled the same way as tda9887. The tuner.ko module (tuner-core) will pass commands to tda8290 via the tuner_operations interface. tda8290 will communicate with tda827x via the dvb_frontend interface, while passing a pointer to a private data structure. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 1 linux/drivers/media/dvb/frontends/tda827x.c | 307 ++++++++++++++- linux/drivers/media/dvb/frontends/tda827x.h | 10 linux/drivers/media/video/tda8290.c | 566 +++++----------------------- linux/drivers/media/video/tda8290.h | 30 - linux/drivers/media/video/tuner-core.c | 16 6 files changed, 424 insertions(+), 506 deletions(-)
2007-10-24mt2131: replace comma with semicolon fixSteven Toth
From: Steven Toth <stoth@hauppauge.com> Semicolon fix. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-24s5h1409: Fix broken QAM supportSteven Toth
From: Steven Toth <stoth@hauppauge.com> This patch enables QAM Annex-B support (US digital cable) for the s5h1409 VSB/QAM demodulator. Tested successfully with the mt2131 tuner, present on the following supported boards: Hauppauge WinTV-HVR-1250 Hauppauge WinTV-HVR-1800 Hauppauge WinTV-HVR-1800lp This patch is also known to work with an upcoming XC5000 tuner driver. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-18Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIGMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-11DiB0700-device: Using 1.10 firmwarePatrick Boettcher
From: Patrick Boettcher <pb@linuxtv.org> As for most of the users the 1.10 firmware is an improvement we should use this firmware always now. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2007-10-17synchronize dst.c with kernel versionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-17Make it backward compatible with kernels <2.6.24Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-17backport changeset 3b04ddde02cf1b6f14f2697da5c20eca5715017fMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Original description: [NET]: Move hardware header operations out of netdevice. Since hardware header operations are part of the protocol class not the device instance, make them into a separate object and save memory. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 11:48:33 +0000