summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/Makefile
AgeCommit message (Collapse)Author
2008-08-20link tuner before saa7134Mauro Carvalho Chehab
From: Simon Arlott <simon@fire.lp0.eu> If saa7134_init is run before v4l2_i2c_drv_init (tuner), then saa7134_board_init2 will try to set the tuner type for devices that don't exist yet. This moves tuner to before all of the device-specific drivers so that it's loaded early enough on boot. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-22merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-16tuner-3036: remove driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This driver is for VERY old i2c-over-parallel port teletext receiver boxes. Rather then spending effort on converting this driver to V4L2, and since it is extremely unlikely that anyone still uses one of these devices, it was decided to drop it (after discussing this as well with the original author, Phil Blundell). Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Phil Blundell <philb@gnu.org>
2008-08-16dpc7146: remove dpc7146 demonstration board driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Old driver for the dpc7146 demonstration board that is no longer relevant. The last time this was tested on actual hardware was probably around 2002. Since this is a driver for a demonstration board the decision was made (after discussing this with the original author, Michael Hunold) to remove it rather than spending a lot of effort continually updating this driver to stay in sync with the latest internal V4L2 or I2C API. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Hunold <hunold@linuxtv.org>
2008-08-14Add support for Micron MT9M111 camera.Robert Jarzmik
Adds support for Micron MT9M111 camera chip, with basic features : - view rectangle configurable - some output formats (bayer8, bayer10, rgb565, rgb555, ycbycr) - autoexposure - only highpower mode context used (ie. context B) Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 6 + drivers/media/video/Makefile | 1 + drivers/media/video/mt9m111.c | 960 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 967 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/mt9m111.c
2008-07-25v4l-dvb: remove broken PlanB driverHans Verkuil
From: Adrian Bunk <bunk@kernel.org> The PlanB driver has been broken since around May 2004. No one stepped in to maintain it, so it is now being removed. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Michel Lanners <mlan@cpu.lu> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-20videodev: split off the ioctl handling into v4l2-ioctl.cHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> videodev.c became top-heavy so all the ioctl processing has been split off into v4l2-ioctl.c. This means videodev.c is back to its original purpose: creating and registering v4l devices. Since videodev.c and v4l2-ioctl.c should still remain one module (as least for now) I also had to rename videodev.c to v4l2-dev.c to prevent a circular dependency when building a videodev.ko module. This is not a bad thing, since the source and header now have the same name. And the v4l2- prefix is useful to see which sources are generic v4l2 support code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17soc_camera_platform: Add SoC Camera Platform driverMagnus Damm
This patch adds a simple platform camera device. Useful for testing cameras with SoC camera host drivers. Only one single pixel format and resolution combination is supported. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- drivers/media/video/Kconfig | 6 drivers/media/video/Makefile | 1 drivers/media/video/soc_camera_platform.c | 198 +++++++++++++++++++++++++++++ include/media/soc_camera_platform.h | 15 ++ 4 files changed, 220 insertions(+)
2008-07-17sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3Magnus Damm
This is V3 of the SuperH Mobile CEU soc_camera driver. The CEU hardware block is configured in a transparent data fetch mode, frames are captured from the attached camera and written to physically contiguous memory buffers provided by the newly added videobuf-dma-contig queue. Tested on sh7722 and sh7723 processors. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2: - remove SUPERH Kconfig dependency - move sh_mobile_ceu.h to include/media - add board callback support with enable_camera()/disable_camera() - add support for declare_coherent_memory - rework video memory limit - more verbose error messages Changes since V1: - fixed the CEU driver to work with the newly updated patches drivers/media/video/Kconfig | 8 drivers/media/video/Makefile | 1 drivers/media/video/sh_mobile_ceu_camera.c | 657 ++++++++++++++++++++++++++++ include/media/sh_mobile_ceu.h | 12 4 files changed, 678 insertions(+)
2008-07-16videobuf: Add physically contiguous queue code V3Magnus Damm
This is V3 of the physically contiguous videobuf queues patch. Useful for hardware such as the SuperH Mobile CEU which doesn't support scatter gatter bus mastering. Since it may be difficult to allocate large chunks of physically contiguous memory after some uptime due to fragmentation, this code allocates memory using dma_alloc_coherent(). Architectures supporting dma_declare_coherent_memory() can easily avoid fragmentation issues by using dma_declare_coherent_memory() to force dma_alloc_coherent() to allocate from a certain pre-allocated memory area. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> --- Changes since V2 - use dma_handle for physical address - use "scatter gather" instead of "scatter gatter" Changes since V1: - use dev_err() instead of pr_err() - remember size in struct videobuf_dma_contig_memory - keep struct videobuf_dma_contig_memory in .c file - let videobuf_to_dma_contig() return dma_addr_t - implement __videobuf_sync() - return statements, white space and other minor fixes drivers/media/video/Kconfig | 5 drivers/media/video/Makefile | 1 drivers/media/video/videobuf-dma-contig.c | 417 +++++++++++++++++++++++++++++ include/media/videobuf-dma-contig.h | 32 ++ 4 files changed, 455 insertions(+)
2008-07-01merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-30merge...Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-06-30gspca: all subdriversJean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - remaning subdrivers added - remove the decoding helper and some specific frame decodings Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-06-30From: Laurent Pinchart <laurent.pinchart@skynet.be>Mauro Carvalho Chehab
USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Notice: Due to MAINTAINERS file that isn't at mercurial tree, I've committed it on my -git and backported to -hg. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-26This driver adds support for the Sensoray 2255 devices.Mauro Carvalho Chehab
From: Dean Anderson <dean@sensoray.com> It was primarily developed by Dean Anderson with only a little bit of guidance and cleanup by Greg. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-06Re-creates VIDEO_TUNERMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30Use the same name convention for all tuners under common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Auto generated by this script: for i in `find drivers/media/ -name Kconfig`; do cat $i |\ sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\ sed s,VIDEO_TUNER,MEDIA_TUNER,g |\ sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\ sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\ sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\ sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\ sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\ sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\ sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\ sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\ sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\ sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\ sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\ sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\ sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\ sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done for i in `find drivers/media/ -type f`; do cat $i |\ sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\ sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\ sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\ sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\ sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\ sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\ sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\ sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\ sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\ sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\ sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\ sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\ sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\ sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\ sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\ sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-30backport tuners move patch from -gitMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to the feedback I got, I've changed the -git patch. This needs to be reflected also at -hg tree. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-28cx18: new driver for the Conexant CX23418 MPEG encoder chipHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from Conexant for their support. I am in particular thankful to Hauppauge since without their help this driver would not exist. It should also be noted that Steve did the work to get the DVB part up and running. Thank you! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: G. Andrew Walls <awalls@radix.net>
2008-04-26From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Move tuners to common/tuners There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. This patch moves those common tuners into a common dir. It also moves saa7146 driver into drivers/media/video, where other hybrid drivers are placed. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-18Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBMauro Carvalho Chehab
From: Steven Toth <stoth@hauppauge.com> Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-09saa717x: add new audio/video decoder i2c driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-30tuner-simple: fix broken build dependencyMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner-simple is the only module that uses tuner-types - these will be merged to a single module in the future. For now, build both of them if TUNER_SIMPLE is selected. This fixes the following build warning, if tuner-simple is selected without tuner-types: WARNING: "tuner_count" [tuner-simple.ko] undefined! WARNING: "tuners" [tuner-simple.ko] undefined! Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-05 Add support for the MT9V022 cameraMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver supports Micron MT9V022 colour camera. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 Add support for the MT9M001 cameraMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver supports Micron MT9M001 monochrome and colour cameras. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 V4L2 soc_camera driver for PXA27x processorsMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This patch adds a driver for the Quick Capture Interface on the PXA270. It is based on the original driver from Intel, but has been re-worked multiple times since then, now for the first time it supports the V4L2 API. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-05 soc_camera V4L2 driver for directly-connected SoC-based camerasMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> This driver provides an interface between platform-specific camera busses and camera devices. It should be used if the camera is connected not over a "proper" bus like PCI or USB, but over a special bus, like, for example, the Quick Capture interface on PXA270 SoCs. Later it should also be used for i.MX31 SoCs from Freescale. It can handle multiple cameras and / or multiple busses, which can be used, e.g., in stereo-vision applications. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-31merge: http://linuxtv.org/hg/~mkrufky/tuner-simpleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-29Fix bug #9833: regression when compiling V4L without I2CMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Adrian Bunk reported: > > Commit 8ffbc6559493c64d6194c92d856196fdaeb8a5fb causes the following > > compile error with CONFIG_VIDEO_DEV=y/m, CONFIG_I2C=n: > > > > <-- snip --> > > > > ... > > MODPOST 26 modules > > ERROR: "i2c_attach_client" [drivers/media/video/v4l2-common.ko] undefined! > > make[2]: *** [__modpost] Error 1 > > > > <-- snip --> ... And what should happen if CONFIG_VIDEO_DEV=y, CONFIG_I2C=m? CC: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-27tuner: build tuner-types independently of tuner-coreMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner-types is needed for tuner-simple, and does not need to be bound to tuner-core. Any caller of tuner-simple, including tuner-core, needs to pass a structure from tuner-types into tuner-simple at attach-time. Export the two needed symbols from tuner-types for now, so that card-level drivers can attach tuner-simple for hybrid dvb_frontend devices. We will remove this dependency altogether as tuner refactoring phase 3 progresses. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-12 V4L: add support for Syntek DC1125 webcamsMauro Carvalho Chehab
From: Jaime Velasco Juan <jsagarribay@gmail.com> This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-18cs5345: new i2c driver.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-11-06Fix compilation for TDA8290Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> drivers/media/video/tda8290.c:27:21: error: tda827x.h: No such file or directory drivers/media/video/tda8290.c:28:22: error: tda18271.h: No such file or directory drivers/media/video/tda8290.c:52: error: field 'cfg' has incomplete type drivers/media/video/tda8290.c: In function 'tda829x_find_tuner': drivers/media/video/tda8290.c:590: error: implicit declaration of function 'tda18271_attach' drivers/media/video/tda8290.c:598: error: implicit declaration of function 'tda827x_attach' kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-30m52790: add new Mitsubishi A/V switch i2c driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This driver is used by the ASUS Falcon2 cx23416-based cards. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-10-21make tda9887 build selectable via KconfigMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 10 +++++++++ linux/drivers/media/video/Makefile | 3 +- linux/drivers/media/video/tda9887.c | 23 ++++++++++++++------- linux/drivers/media/video/tda9887.h | 33 +++++++++++++++++++++++++++++++ linux/drivers/media/video/tuner-core.c | 3 +- linux/drivers/media/video/tuner-driver.h | 4 --- 6 files changed, 62 insertions(+), 14 deletions(-)
2007-10-23Convert tuner-xc2028 driver to the newer hybrid approachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This changeset converts tuner-xc2028 to the newer hybrid approach. It also prevents creating twice the xc3028 private struct by both DVB and V4L parts. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 8 linux/drivers/media/video/Kconfig | 12 linux/drivers/media/video/Makefile | 5 linux/drivers/media/video/tuner-core.c | 12 linux/drivers/media/video/tuner-driver.h | 2 linux/drivers/media/video/tuner-xc2028.c | 424 ++++++++++++++----------------- linux/drivers/media/video/tuner-xc2028.h | 24 + 7 files changed, 248 insertions(+), 239 deletions(-)
2007-10-02Add tuner-xc2028 driverMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Add support for Xceive XC2028/XC3028 tuner driver Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/Kconfig | 12 linux/drivers/media/video/Makefile | 4 linux/drivers/media/video/tuner-core.c | 5 linux/drivers/media/video/tuner-driver.h | 2 linux/drivers/media/video/tuner-xc2028.c | 407 +++++++++++++++++++++++++++++++ linux/drivers/media/video/tuner-xc2028.h | 9 v4l/versions.txt | 1 7 files changed, 440 insertions(+)
2007-08-23Rename video-buf-dvb to videobuf-dvb to be consistent with the other patchesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-02Add videobuf-vmallocMauro Carvalho Chehab
Adds a newer videobuf-vmalloc module. This module uses the same videobuf controls, but implements memory allocation based on vmalloc methods. With this method, an USB driver can use video-buf, without needing to request memory from the DMA-safe area. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 4 linux/drivers/media/video/Kconfig | 2 linux/drivers/media/video/Makefile | 1 linux/drivers/media/video/videobuf-vmalloc.c | 385 ++++++++++++++++++++++++++ linux/include/media/videobuf-vmalloc.h | 44 ++ 5 files changed, 435 insertions(+), 1 deletion(-)
2007-08-23Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-03-11Add CX23885/CX23887 PCIe bridge driverMichael Krufky
From: Steven Toth <stoth@hauppauge.com> This is a new framework to support boards based on the CX23885/7 PCIe bridge. The framework supports digital (no analog yet) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-27tuner: alter build to produce separate modulesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Break tuner.ko into separate modules. This was a quick change - Tuner sub-drivers are still static-linked to tuner.ko, this will change after using dvb_attach and removing the probing functions. After this change, one can deselect undesired tuner sub-drivers via Kconfig. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-27Add vp27smpx driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv, cx25840: postpone fw load until first use.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-18TCM825x: Add driver.Mauro Carvalho Chehab
From: Sakari Ailus <sakari.ailus@nokia.com> Add a driver for Toshiba TCM825x VGA camera sensor. This sensor is used e.g. in Nokia N800 internet tablet. This driver uses the new V4L2 internal ioctl interface. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18V4L: Add internal ioctl-like interface.Mauro Carvalho Chehab
From: Sakari Ailus <sakari.ailus@nokia.com> This patch adds an internal ioctl-like interface which can be used in situations where a single Video4Linux device is implemented by multiple device drivers. One master device controls one or more slave devices. The slaves provide Video4Linux ioctl-like interface for the use of the master. Only a handful of ioctls are implemented at the moment. More can (and should) be added as more functionality is required. Signed-off-by: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-01TUNER_TEA5761 kconfig fixesMichael Krufky
From: Adrian Bunk <bunk@stusta.de> The following doesn't make much sense: drivers/media/video/Kconfig: ... config TUNER_TEA5761 tristate "TEA 5761 radio tuner (EXPERIMENTAL)" ... drivers/media/video/Makefile: ... ifneq ($(CONFIG_TUNER_TEA5761),) tuner-objs += tea5761.o endif ... With this setup, TUNER_TEA5761=m is equivalent to TUNER_TEA5761=y. This patch therefore changes TUNER_TEA5761 to a bool. The missing dependency on EXPERIMENTAL the prompt text indicates also gets added by this patch. Additionally, the Makefile entry can now be written in a more compact way. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-06-25Fix Kbuild for kbd-ir-i2cMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Potentially, all board types with I2C and IR support can use an i2c based IR. Currently, the driver is selected only if bt848 or saa7134 boards are selected. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-08Fix tea5761 unselectionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-07Allow using tea5761 radio device on tuner-coreMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> tea5761 is a driver wrote back on 2005, to support Philips tea5671 radio, meanting to be used on some devices that would be lauched with those chips. Recently, some people seems to be interested on having support for those chips at Linux Kernel. Let's enable compilation of this driver and ask they to test if this works fine. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-06 13:10:04 +0000