summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/cx23885
AgeCommit message (Collapse)Author
2007-09-15VIDEO_CX23885 must select DVB_PLL if !DVB_FE_CUSTOMISE for FusionHDTV5 ExpressMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-09cx23885: use a pointer to the required i2c bus in dvb_register functionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store a pointer to the required i2c_bus so that we do not put the wrong analog demod into standby. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-08cx23885: Changes to allow demodulators on each transport bus.Steven Toth
From: Steven Toth <stoth@hauppauge.com> cx23885: Changes to allow demodulators on each transport bus. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-08cx23885: add support for DViCO FusionHDTV 5 ExpressMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch adds digital ATSC / QAM support for the DViCO FusionHDTV5 Express. Remote control is supported by ir-kbd-i2c, RTC is supported by rtc-isl1208. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-08Changes to support MPEG TS on VIDBSteven Toth
From: Steven Toth <stoth@hauppauge.com> Changes to support MPEG TS on VIDB Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-08Changes to support interrupts on VIDBSteven Toth
From: Steven Toth <stoth@hauppauge.com> Changes to support interrupts on VIDB Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-08cx23885: define Video B Interrupt Status register bit valuesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - define missing register bit values for VID_B - corrected VID/VBI_B_GPCNT_CTL register addresses Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-06Ensure start_dma() is capable of starting dma on port VIDB.Steven Toth
From: Steven Toth <stoth@hauppauge.com> start_dma() would fail to start dma if a device used VIDB (portb). Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-06Removed a redundant switch()Steven Toth
From: Steven Toth <stoth@hauppauge.com> The switch() statement is no longer required. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-08cx23885: GPIO fix for non HVR1800lp boards.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The HVR1250 and HVR1800 boards need the s5h1409 demod GPIO enabled. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-09-04cx23885: Minor cleanup and important NMI comment placed in code.Steven Toth
From: Steven Toth <stoth@hauppauge.com> I wanted to document the NMI assert issue inside the code, even though it's already documented in the patch history. If/when the next cx23887 revision appears, is may need to be enabled on that also. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-04cx23885: Removing duplicate tuner and demod definitions.Steven Toth
From: Steven Toth <stoth@hauppauge.com> A number of Hauppauge boards share the same tuner and demod configurations. This patch removes duplicate structures. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-04cx23885: Cleaning up definesSteven Toth
From: Steven Toth <stoth@hauppauge.com> Moving some defines into the correct header file. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-04cx23885: General cleanup of old code.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Removed unused code. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-22cx23885: Added HVR1250 ATSC support.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Adding support for the Hauppauge HVR1250 PCIe ATSC board. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-22cx23885: Changed PCI quirks to after bridge detech.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Changed the pci_quirks function to detech the bridge type before setting the NMI clear bit, rather than detecting based on unique board id. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-14cx23885: Ensure pci_quirks is called after board identification.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The pci_quirks function was being called too early during initialisation, it needs to be called after the board has been identified. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-22cx23885: fix Kconfig dependenciesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20cx23885: turn off i2c_debug by defaultMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Turn off i2c_debug by default, to make the driver less verbose. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20cx23885: remove old commentsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20cx23885: whitespace cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20cx23885-dvb.c doesnt need to include dvb-pll.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The dvb-pll module is not being used by this driver. Remove the unneeded #include. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20cx23885: fix semaphore / mutex compat for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20General code cleanup.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Removed if 0'd code, removed cx88 references. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-20Fix MT2131 tuner lock status problem.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The mt2131 tuner reports lock even when the hardware should not lock. This patch allows the s5h1409 demodulator to be configured to query either the tuner driver for status, or the demodulator status when the application requests lock status. This avoids returning false CARRIER and/or SIGNAL lock status. note: the majority of this change has already been merged with the S5H1409 and MT2131 drivers. This is the remainder of the changeset, which only touches cx23885-dvb.c Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-19Removed the need to manually define .bridge for each card.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Moved the field from cx23885_board to cx23885_dev and added code to iautomatically set the bridge type based on the pci device id. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-19Added the I2C_FUNC_I2C support to the cx23885 i2c algo definition.Steven Toth
From: Steven Toth <stoth@hauppauge.com> This is required to support the cx258xx family of audio and video decoders. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-19Cleanup/remove code to access the sram memory maps.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The cx23885 and cx23887 family use two different memory maps which govern how the internal SRAM is configured. This patch streamlines the access to those structures. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-19NMI hang and corrupt transport packet fixesSteven Toth
From: Steven Toth <stoth@hauppauge.com> The sram allocations for the cx23887 differ slightly from the cx23885. This patch modifies the cx23887 specific sram memory map to reflect this. As a result, interrupts and DMA handling have also been enabled in cx23885_start_dma() for 887 specific boards. ATSC streaming is now available on cx23885 and cx23887 bridges. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-16I2C bus 3 register was incorrect.Steven Toth
From: Steven Toth <stoth@hauppauge.com> I2C bus 3 was being initialised with the incorrect address register. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-11cx23885: forward compatibility fixes for recent kernelsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - fix #include for <media/video-buf-dvb.h> - fix cx23885_irq declaration for 2.6.19 and later Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-11Add CX23885/CX23887 PCIe bridge driverMichael Krufky
From: Steven Toth <stoth@hauppauge.com> This is a new framework to support boards based on the CX23885/7 PCIe bridge. The framework supports digital (no analog yet) Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 14:29:04 +0000