summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/cx23885
AgeCommit message (Collapse)Author
2008-03-25merge: http://linuxtv.org/hg/~mkrufky/tda18271c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-23tda18271: allow device-specific configuration of rf agc topMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> allow device-specific configuration of rf agc rf top and if top Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-23tda18271: allow device-specific configuration of IF levelMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-18merge: http://linuxtv.org/hg/~mkrufky/tda18271Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-16tda18271: store agc_mode configuration independently of std_bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-14Fix left-overs from the videobuf-dma-sg.c conversion to generic DMAMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> The dev element of the struct videobuf_queue is now of type struct device implicitly. Fix left-over casts. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-10use tuner-simple for LG TDVS-H06xF digital tuning supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Convert cx88-dvb, dvb-bt8xx, b2c2-flexcop, cxusb and cx23885 to use tuner-simple instead of dvb-pll for LG TDVS-H06xF Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-03-21Removes video_dev from tuner-xc2028 config structMauro Carvalho Chehab
The video_dev parameter, on tuner-xc2028 were used to pass i2c private data to tuner_callback. Since the driver already have a pointer to i2c_adap->algo_data, uses this instead. This parameter were used also as a magic number to idenfity if two drivers are trying to register the same xc3028 tuner. This occurs with boards with DVB support, where both DVB and V4L drivers will share the same tuner. Instead of using the algo_data as a private number, after this patch, the driver will use i2c_adap->dev, with seems more consistent. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>Mauro Carvalho Chehab
Subject: Convert videobuf-dma-sg to generic DMA API Date: Tue, 19 Feb 2008 13:40:54 +0100 (CET) videobuf-dma-sg does not need to depend on PCI. Switch it to using generic DMA API, convert all affected drivers, relax Kconfig restriction, improve compile-time type checking, fix some Coding Style violations while at it. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-27[PATCH] static memoryDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> - Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-01-05xc5000: Small amount of cleanup and commenting.Steven Toth
From: Steven Toth <stoth@hauppauge.com> xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-05XC5000: Fix support for HVR1500Q broken by patch 1Steven Toth
From: Steven Toth <stoth@hauppauge.com> From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Patch committed as-is, cleanups to follows .... Steve Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-15s5h1409: Bug fix for parallel support.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-12cx23885: dprintk macro cleanupSteven Toth
From: Steven Toth <stoth@hauppauge.com> Added missing do { } while (0) Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Cleanup of compiler defines and warningsSteven Toth
From: Steven Toth <stoth@hauppauge.com> Portions of the code are if 0'd out but these are placeholders for work already in progress, these will be activiated very shortly. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Small cleanupSteven Toth
From: Steven Toth <stoth@hauppauge.com> cx23885: Small cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Video and VBI related files.Steven Toth
From: Steven Toth <stoth@hauppauge.com> cx23885: Video and VBI related files. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Add basic video support for the HVR1800Steven Toth
From: Steven Toth <stoth@hauppauge.com> This enabled basic preview NTSC and PAL support for the HVR1800. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Track the board clock frequency and allow overrides.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The cx23885/6/8 all have different clock rates, this patch allows the core to compensate, and developers to allow vendor specific overrides. This patches will be used by future analog video and encoder patches. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: SRAM reallocation prior to analog video implementation.Steven Toth
From: Steven Toth <stoth@hauppauge.com> We need to clear space large enough for the video and encoder fifos. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Ensure HVR1800 TDA8295A is reset fully on module load.Steven Toth
From: Steven Toth <stoth@hauppauge.com> Failure to do this means that a full system reboot is required if the part hangs. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-10cx23885: Add support for device revision detectionSteven Toth
From: Steven Toth <stoth@hauppauge.com> Each version of the cx23885/7/8 silicon has different build revs. We'll use this internal revision to work around bugs and known issues in the video and encoder related patches. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-02tda18271: store IF frequency in a u16 instead of u32Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: allow device-specific configuration of IF frequency and std bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/cx23885Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1250Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1800Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-26Kconfig: VIDEO_CX23885 must select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Everybody forgets to add the Kconfig stuff after they add new card support :-/ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24cx23885: fix bad use count caused by tda18271 being probed by tda8290Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Don't allow the tda8290 module to probe and attach the tuner module, causing incorrect use counts when using dvb_attach. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-23merge: http://linuxtv.org/hg/~mkrufky/ezqamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-22Kconfig: VIDEO_CX23885 selects TUNER_TDA8290 and DVB_TDA18271Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-22Kconfig: VIDEO_CX23885 must select TUNER_XC2028 if !DVB_FE_CUSTOMIZEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-17cx23885: add support for Hauppauge WinTV HVR-1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-06cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add module option 'alt_tuner' disabled by default. When set to one, the dvb_frontend of HVR1800 will consist of: s5h1409 demod + tda18271 tuner When set zero (default), the dvb_frontend of HVR1800 will consist of: s5h1409 demod + mt2131 tuner note: The tda18271 is usually used for analog tuning on this board. If the tda18271 is used in digital mode, you will not be able to tune an analog channel at the same time. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21merge: http://linuxtv.org/hg/~stoth/xc5000Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-19Avoid 'unknown model' message for the HVR1500-QSteven Toth
From: Steven Toth <stoth@hauppauge.com> Avoid 'unknown model' message for the HVR1500-Q Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-19xc5000: Cleanups of types, result codes etc.Steven Toth
From: Steven Toth <stoth@hauppauge.com> This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-19Kconfig: VIDEO_CX23885 must select DVB_LGDT330XMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-17Add support for the Hauppauge HVR1500Q.Steven Toth
From: Steven Toth <stoth@hauppauge.com> The express card ATSC/QAM tuner. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-15cx23885: correctly join I2C writes and reads from same addressChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> When an I2C message specifies a write then a read from the same I2C address, we need to tell the chip to not release the bus between the message parts. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-13s5h1409: fix IF frequency configurationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> On the s5h1409 demod, the IF frequency for VSB is limited to 44 / 5.38 MHz. Hardcode VSB IF frequency within the driver to 44 / 5.38 MHz. QAM IF frequency remains configurable via attach-time configuration. Acked-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-11-15merge: http://ifup.org/hg/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-06V4L: videobuf: don't chew up namespace STATE_.*, convert to VIDEOBUF_Brandon Philips
s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g s/STATE_PREPARED/VIDEOBUF_PREPARED/g s/STATE_QUEUED/VIDEOBUF_QUEUED/g s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g s/STATE_DONE/VIDEOBUF_DONE/g s/STATE_ERROR/VIDEOBUF_ERROR/g s/STATE_IDLE/VIDEOBUF_IDLE/g Signed-off-by: Brandon Philips <bphilips@suse.de>
2007-11-05 cx23885/: cleanupsMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch contains the following cleanups: - make the following needlessly global code static: - cx23885-core.c: struct cx23885_sram_channels[] - cx23885-core.c: struct cx23887_sram_channels[] - cx23885-core.c: cx23885_wakeup() - cx23885-core.c: cx23885_sram_channel_setup() - cx23885-core.c: cx23885_sram_channel_dump() - cx23885-core.c: cx23885_risc_disasm() - cx23885-core.c: cx23885_shutdown() - cx23885-core.c: cx23885_reset() - cx23885-core.c: cx23885_dev_unregister() - cx23885-core.c: cx23885_risc_databuffer() - cx23885-core.c: cx23885_risc_stopper() - #if 0 the following unused functions: - cx23885-core.c: cx23885_risc_buffer() - cx23885-core.c: cx23885_cancel_buffers() - remove the following unused EXPORT_SYMBOL's: - cx23885-cards.c: cx23885_boards - cx23885-i2c.c: cx23885_call_i2c_clients Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-29 use input functions, should depend on INPUTMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> All of these drivers select VIDEO_IR, which uses the input subsystem, so they should also depend on INPUT. Problem examples: drivers/built-in.o: In function `ir_input_key_event': ir-functions.c:(.text+0x10849a): undefined reference to `input_event' ir-functions.c:(.text+0x1084ac): undefined reference to `input_event' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc0a): undefined reference to `get_key_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11cc4f): undefined reference to `get_key_pinnacle_grey' drivers/built-in.o: In function `saa7134_input_fini': (.text+0x11cd8b): undefined reference to `input_unregister_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d1fa): undefined reference to `input_allocate_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d317): undefined reference to `input_register_device' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11d6ca): undefined reference to `input_free_device' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c3f3): undefined reference to `ir_codes_hauppauge_new' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c450): undefined reference to `ir_codes_pinnacle_color' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c480): undefined reference to `ir_codes_purpletv' drivers/built-in.o: In function `saa7134_set_i2c_ir': (.text+0x11c495): undefined reference to `ir_codes_pinnacle_grey' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c622): undefined reference to `ir_rc5_timer_end' drivers/built-in.o: In function `saa7134_ir_start': (.text+0x11c637): undefined reference to `ir_rc5_timer_keyup' drivers/built-in.o: In function `build_key': saa7134-input.c:(.text+0x11c769): undefined reference to `ir_extract_bits' saa7134-input.c:(.text+0x11c7ad): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f0): undefined reference to `ir_input_keydown' saa7134-input.c:(.text+0x11c7f9): undefined reference to `ir_input_nokey' saa7134-input.c:(.text+0x11c806): undefined reference to `ir_input_nokey' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ca07): undefined reference to `ir_codes_encore_enltv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11caf6): undefined reference to `ir_input_init' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cbf2): undefined reference to `ir_codes_avermedia' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc24): undefined reference to `ir_codes_pctv_sedna' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc53): undefined reference to `ir_codes_flydvb' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cc85): undefined reference to `ir_codes_videomate_tv_pvr' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ccb7): undefined reference to `ir_codes_pixelview' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cce9): undefined reference to `ir_codes_eztv' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cd1b): undefined reference to `ir_codes_manli' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cda8): undefined reference to `ir_codes_cinergy' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cdd7): undefined reference to `ir_codes_flyvideo' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce06): undefined reference to `ir_codes_asus_pc39' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11ce7d): undefined reference to `ir_codes_gotview7135' drivers/built-in.o: In function `saa7134_input_init1': (.text+0x11cee1): undefined reference to `ir_codes_proteus_2309' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-20cx23885: i2c 16bit reg/val read/write fixSteven Toth
From: Steven Toth <stoth@hauppauge.com> Fix i2c reads and writes of 16bit register address / values Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-13 Double-free in cx23885_initdevMauro Carvalho Chehab
From: Florin Malita <fmalita@gmail.com> Both cx23885_initdev and cx23885_dev_setup free the device in their error path so a failure in the latter causes a double-free. Since cx23885_dev_setup is only called from cx23885_initdev, it should be safe to remove its deallocation and leave the cleanup up to the allocating function. Coverity CID 1922. Signed-off-by: Florin Malita <fmalita@gmail.com> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 00:09:50 +0000