summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/cx88/cx88-cards.c
AgeCommit message (Collapse)Author
2008-03-16cx88: Fix audio on Prolink Pixelview Mpeg 8000GTMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This board works only with non-mts firmware Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-14Add basic support for Prolink Pixelview MPEG 8000GTMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> TV reception ok. S-video and Composite not tested. Audio not tested. IR not implemented yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-07cx88: Fix memset for tuner-xc3028 controlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Fix a cut-and-paste error Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-06Fix bad whitespacesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-25cx88: fix GPIO for FusionHDTV 7 Gold input selectionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix GPIO for FusionHDTV 7 Gold tv / s-video / composite input selection. Fix card textual name to match other FusionHDTV device names. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25cx88: add analog support for DVICO FusionHDTV7 GoldMichael Krufky
From: Steven Toth <stoth@hauppauge.com> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-25cx88-cards: Fix powerangel gpio1Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> With this gpio, audio works properly. Thanks to Daniel Fraga <fragabr@gmail.com> for helping on fixing the code for Powerangel Real board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-19cx88: Powercolor Angel works only with firmware version 2.5Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 4 ++++ 1 file changed, 4 insertions(+)
2008-02-19cx88: Fix: Loads tuner module before sending commands to itMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 5 +++++ linux/drivers/media/video/cx88/cx88-video.c | 2 -- 2 files changed, 5 insertions(+), 2 deletions(-)
2008-02-19cx88: prints an info when xc2028 is set or is attachedMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 3 ++- linux/drivers/media/video/cx88/cx88-dvb.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-)
2008-02-19cx88-cards: always use a level on printk messagesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 71 ++++++++++++++++------------ 1 file changed, 41 insertions(+), 30 deletions(-)
2008-02-19Some cleanups at cx88 callback methodsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 57 +++++++++------------------- 1 file changed, 19 insertions(+), 38 deletions(-)
2008-01-29FusionHDTV DVB-T Pro tuning problem fixesMauro Carvalho Chehab
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> It seems that on this board, the demodulator provides the pullup on the I2C bus, which means that calling i2c_gate_ctrl crashes the bus. Turn this off and the xc3028 can talk OK. Also fix some GPIO related settings that became more clear through working on this. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/cx88/cx88-cards.c | 16 ++++++++++------ linux/drivers/media/video/cx88/cx88-dvb.c | 8 ++++++++ 2 files changed, 18 insertions(+), 6 deletions(-)
2008-01-29Support DVB-T tuning on the DViCO FusionHDTV DVB-T ProMauro Carvalho Chehab
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Add support for tuning DVB-T channels on DViCO's FusionHDTV DVB-T Pro board. The IR remote and analog tuner are not supported at this time. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au> Some changes made by Mauro Chehab to allow merging it with some other xc3028 patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.cx88 | 1 linux/drivers/media/video/cx88/cx88-cards.c | 65 ++++++++++++++++++++++++-- linux/drivers/media/video/cx88/cx88-dvb.c | 23 +++++++++ linux/drivers/media/video/cx88/cx88.h | 1 4 files changed, 85 insertions(+), 5 deletions(-)
2008-01-29cx88: Add xc2028/3028 boardsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch ports a patch from Markus Rechberger to work with tuner-xc2028. It adds entries for several cx88 boards with xc2038/3028 tuners. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/Documentation/video4linux/CARDLIST.cx88 | 4 linux/drivers/media/video/cx88/cx88-cards.c | 192 +++++++++++++++++++++++++- linux/drivers/media/video/cx88/cx88-dvb.c | 50 ++++++ linux/drivers/media/video/cx88/cx88.h | 4 4 files changed, 248 insertions(+), 2 deletions(-)
2008-02-25cx88: Add support for tuner-xc3028Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Callback gpio's based on Markus Rechberger, Christopher Pascoe and Steven Toth patches. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-17cx88: fix FusionHDTV 5 PCI nano name and enable IR supportMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> load ir-kbd-i2c for IR remote control support on DViCO FusionHDTV 5 PCI nano Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-02-16merge: ~stoth/pci-nanoMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-15cx88: Add support for the Dvico PCI Nano.Steven Toth
From: Steven Toth <stoth@hauppauge.com> ATSC is known to work. SVideo / Composite should work (I have no cable to test). Analog tuner support does not work. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-05xc5000: Small amount of cleanup and commenting.Steven Toth
From: Steven Toth <stoth@hauppauge.com> xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-05New card supported(partially): Pinnacle 800iSteven Toth
From: Steven Toth <stoth@hauppauge.com> From Zhang: This patch continues the support for the Pinnacle HD 800i. Signed-off-by: Chaogui Zhang <czhang1974@gmail.com> Patch committed as-is, cleanups to follow ... Steve Signed-off-by: Steven Toth <stoth@hauppauge.com>
2008-01-21cx88: Ensure the tuner is reset correctlySteven Toth
From: Steven Toth <stoth@hauppauge.com> Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Chaogui Zhang <czhang1974@gmail.com>
2007-09-30Audio routes fix for blackbird boards with the wm8775 ADCRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> Fix lack of audio on the MPEG-2 stream of wm8775 based blackbirds. The wm8775 module initializes the audio input at "route 2", which doesn't hold true for all boards. The HVR-1300, for example, uses route 1 for tuner audio, and route 2 for baseband. So we must route the audio to the proper input depending on what video input is being used. Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-11-02Fix CodingStyleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kern-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-23Fix radio entry for MSI @nyware masterMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Serge Kolotylo for his help Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-19From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Add preliminary support for radio on CX88_BOARD_MSI_TVANYWHERE_MASTER Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-18cx88: Add symbolic names for the PCI interrupt bitsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Used for the PCI_INTMSK and PCI_INT_STAT registers. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-15cx88: Clean up some ugly and inconsistent printk()sTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Get rid of the "CORE" prefix from cx88 printks. It was only used a few times, and it makes it look like they're coming from the kernel core or something. Fix the message, "TV tuner 60 at 0x1fe, Radio tuner -1 at 0x1fe", by adding a "cx88[0]" prefix to be consistent, and to keep people who grep their dmesg output for cx88 from missing it. Get rid of the addresses, which are always wrong. The addresses are always set to -1, but because it's an unsigned 8-bit value, the left shift converts it to the nonsense address 0x1fe. In the cx8802 driver, some cut and pasted code prefixed lines with "CORE cx88[0]:", which has been changed to "cx88[0]/2:" like the other printks from the cx8802 driver. Also fix some ugly printks in the cx8802 driver that used __FUNCTION__ for KERN_INFO and KERN_ERR messages. The changed printks in cx88-mpeg.c also needed lots of whitespace and 80-column fixes. A bunch of misc changes in cx88-dvb.c and cx88-video.c to add message levels or a consistent "cx88[?]/2" or "cx88[?]/0" prefix. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-15cx88: Move card core creation from cx88-core.c to cx88-cards.cTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> A lot of code in cx88-cards.c was only used by cx88-core.c when the core state is first allocated and initialized. Moving that task to cx88-cards makes the driver simpler and the files more self contained. - Module parameters tuner, radio, card, and latency move to cx88-cards.c - cx88_boards is made static - cx88_subids is made static and const - cx88_bcount is eliminated - cx88_idcount is eliminated - cx88_card_list() is made static - cx88_card_setup_pre_i2c() is made static - cx88_card_setup() is made static - cx88_pci_quirks() is moved from cx88-core to cx88-cards The function argument "char *name" is made const too - get_ressources() is moved from cx88-core to cx88-cards, and renamed to cx88_get_resources() - The code to allocate and initialize the core state struct and the chip is moved out of cx88-core.c:cx88_get_core() and into a new function in cx88-cards.c, cx88_core_create(). This makes both functions simpler. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-15cx88: Copy board information into card stateTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The cx88 driver state stored the ID of the board type in core->board. Every time the driver need to get some information about the board configuration, it uses the board number as an index into board configuration array. This patch changes it so that the board number is in core->boardnr, and core->board is a copy of the board configuration information. This allows access to board information without the extra indirection. e.g. cx88_boards[core->board].mpeg becomes core->board.mpeg. This has a number of advantages: - The code is simpler to write. - It compiles to be smaller and faster, without needing the extra array lookup to get at the board information. - The cx88_boards array no longer needs to be exported to all cx88 modules. - The boards array can be made const - It should be possible to avoid keeping the (large) cx88_boards array around after the module is loaded. - If module parameters or eeprom info override some board configuration setting, it's not necessary to modify the boards array, which would affect all boards of the same type. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-31cx88: Wrong values used for HD-3000 radio modeTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-05-17cx88: add support for ADS Tech Instant Video PCIMichael Krufky
From: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-04-19Reverting changeset 294b550d74f4ad567dfa7079555ab16250cbd602Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> This patch went applied at the wrong board. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-19Fix support for Winfast TV2000 XP GlobalMauro Carvalho Chehab
From: C.masoyras <agiofws@gmail.com> Fix GPIO to work with TV and Composite inputs. Signed-off-by: C.masoyras <agiofws@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-31Cx88: Support the DTV1000 T analog inputsMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> Add support for the S-Video and CVBS (composite) analog video inputs of the Leadtek WinFast DTV1000 T adapter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-28Use ARRAY_SIZE and a cleaner logic for initializing tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> ATI HDTV Wonder needs to initialize some registers before allowing the tuner to start working. The current logic have lots of magic. This patch makes the code cleaner, using ARRAY_SIZE() for the initialization array and using a bidimensional array, instead of doing some stuff like: &buffer[i+2][0] Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-11cx88: whitespace cleanupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> replace leading spaces with tabs Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-03-11cx88: autodetect ADS Tech InstantTV DVB-SMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The ADS Tech InstantTV DVB-S is a clone of the KWorld DVB-S 100. This patch adds autodetection support for this card based on pci subsystem id. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-01-21cx88: Add support for svideo/composite input of the Terratec Cinergy 1400 DVB-TMichael Krufky
From: Heiko Baums <heiko@baums-on-web.de> Adds support for the combined S-Video/Composite input of the Terratec Cinergy 1400 DVB-T. Signed-off-by: Heiko Baums <heiko@baums-on-web.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-23cx88: Fix leadtek_eeprom taggingMichael Krufky
From: Jean Delvare <khali@linux-fr.org> WARNING: drivers/media/video/cx88/cx88xx.o - Section mismatch: reference to .init.text: from .text between 'cx88_card_setup' (at offset 0x68c) and 'cx88_risc_field' Caused by leadtek_eeprom() being declared __devinit and called from a non-devinit context. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-11-18Add support ptv-305Mauro Carvalho Chehab
From: Jelle Foks <jelle@foks.8m.com> Add subvendor/device of the ADSTech Instant TV Deluxe PTV-305 to the card list as card=45 (KWORLD_HARDWARE_MPEG_TV_XPERT). Signed-off-by: Jelle Foks <jelle@foks.8m.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-10-16cx88: use external adc for rca audio inputs on the ASUS PVR-416Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> For the ASUS PVR-416, the external adc must be used for the rca audio inputs, but television / radio inputs use the internal adc. Thanks to Alex Deucher for lending his card to me. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-16cx88: use external adc for svideo/composite on the KWorld HardwareMpegTV XPertMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> For the KWorld HardwareMpegTV XPert, the external adc must be used for svideo / composite inputs, but television / radio inputs use the internal adc. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-16cx88: determine whether or not to use external adc based on input settingMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Some cx88-blackbird boards use an external adc, but not necessarily for all inputs. Thus, this needs to be configurable on the card level for each input. This patch allows for the usage of the external adc to be determined by a bit setting in the cx88_input struct for cards based on the cx88 blackbird design. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-16cx88: cleanupsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - fixed whitespace, replaced leading spaces with tabs - moved .mpeg descriptor below input settings Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-29Add WinTV-HVR3000 DVB-T supportSteven Toth
From: Steven Toth <stoth@hauppauge.com> The WinTV-HVR3000 is currently defined for analog support only. This patch adds full DVB-T support. (DVB-S support will be added soon) Signed-off-by: Steven Toth <stoth@hauppauge.com>
2006-09-29Adding support for Nova-T-PCI PCI ID 0070:9000Steven Toth
From: Steven Toth <stoth@hauppauge.com> Adding support for Nova-T-PCI PCI ID 0070:9000 Signed-off-by: Steven Toth <stoth@hauppauge.com>
2006-09-27Dynamic cx88 mpeg port management for HVR1300 MPEG2/DVB-T support. Steven Toth
From: Steven Toth <stoth@hauppauge.com> A series of patches to change the cx88 framework to allow the PCI mpeg port to be shared dynamically between different types of drivers or applications. This patch changes the cx88-dvb and cx88-blackbird drivers to become 'sub drivers' of a higher single cx88-mpeg driver. The cx88-mpeg driver is a superset of the previous cx88-mpeg/blackbird drivers and now owns the IRQ. cx88-dvb/blackbird now become mini drivers, registering themselves with cx88-mpeg through a standard interface with callbacks. Sub drivers request access to hardware via the cx88-mpeg driver. In turn the cx88-mpeg driver determines whether the hardware is busy and accepts or refuses the request, grant access using callbacks into the sub drivers. The net effect is that you are no longer able to tamper with the mpeg port from multiple different applications at the same time, potentially breaking a live mpeg2 hardware encoding or dvb stream. The mechanism extends to enable multiple dvb frontends to be registered and share the single resource. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2006-09-25cx88: autodetect Club3D Zap TV2100 by subsystem id 12ab:2300Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The Club3D Zap TV2100 has been reported to be a clone of the Yuan PG300 and KWorld/VStream XPert DVB-T with cx22702 Thanks-to: Lars Gjesse Kjellberg <lars.g.kjellberg@get2net.dk> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-09-25cx88: rename mpeg capability flags from CX88_BOARD_FOO to CX88_MPEG_FOOMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The flags for mpeg capabilities are sub-optimally named as CX88_BOARD_DVB and CX88_BOARD_BLACKBIRD, which creates some confusion. This patch renames the above to CX88_MPEG_DVB and CX88_MPEG_BLACKBIRD. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> CC: Steven Toth <stoth@hauppauge.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-24 22:32:15 +0000