summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/em28xx
AgeCommit message (Collapse)Author
2009-03-31em28xx: convert to v4l2_subdevDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Converted em28xx driver to v4l2_subdev. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for helping this conversion. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-22em28xx: fix oops on ARM platform when allocating transfer buffersDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Add missing URB_NO_TRANSFER_DMA_MAP flag, since the use of consistent memory is not permitted for DMA on the ARM platform. Thanks to Paul Thomas <pthomas8589@gmail.com> for providing sample ARM hardware that was experiencing the oops (tested on the at91rm9200 based LinuxStamp). Thanks to David Brownell <david-b@pacbell.net> for providing insight into the ARM memory architecture. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-22em28xx: add remote control definition for HVR-900 (both versions)Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The HVR-900 did not have a remote control defined, so it would not work. Add the line for both versions of the product. Thanks to Jens-Michael Hoffmann (#linuxtv user "jmho") for pointing out the issue and testing the patch. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-07em28xx: Prevent general protection fault on rmmodMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> The removal of the timer which polls the infrared input is racy. Replacing the timer with a delayed work solves the problem. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-11Revert the last changeset, since there are a rev 2 of those changesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-05Fix race in infrared polling on rmmodMauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> The race on rmmod I just fixed in cx88-input affects 3 other drivers. Fix these the same way. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-08em28xx-dvb: Remove an unused headerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-04em28xx: enable Compro VideoMate ForYou soundMauro Carvalho Chehab
From: Vitaly Wool <vital@embeddedalley.com> Compro VideoMate uses an external audio DSP chip, controlled via tvaudio module (tda9874a). This patch improves em28xx infrastructure to support an external audio processor and fixes the Compro VideoMate entry to work with it. Signed-off-by: Vitaly Wool <vital@embeddedalley.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03compat: rename struct delayed_work to work_struct on pre-2.6.20Trent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> In v2.6.19-rc6-118-g52bad64 struct work_struct was changed to be only for non-delayed work and struct delayed_work was created for delayed work. Instead of putting ifdefs in the drivers, we use compat.h to rename delayed_work to work_struct on pre-2.6.20 kernels. This will only be a problem if some driver decides to create identifiers named both work_struct and delayed_work in the same scope. There is one driver that has something named work_struct and none with anything named delayed_work, so I don't think will be a problem for as long as this compat code sticks around. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-02-25em28xx: Add Kaiser Baas Video to DVD maker supportDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added usb vendor/product id for Kaiser Baas Video to DVD maker. Thanks to Trevor Campbell <tca42186@bigpond.net.au> for providing all data and tests needed to add this card to em28xx driver. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-25em28xx-cards: Add SIIG AVTuner-PVR boardDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added SIIG AVTuner-PVR to the right entry. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-25em28xx-cards: remove incorrect entryDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Removed EM2821_BOARD_PROLINK_PLAYTV_USB2 entry. This entry has a incorrect tuner set. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-19em28xx: register device to soundcard for sysfsMauro Carvalho Chehab
From: Nicola Soranzo <nsoranzo@tiscali.it> As explained in "Writing an ALSA driver" (T. Iwai), audio drivers should set the struct device for the card before registering the card instance. This will add the correct /sys/class/sound/cardN/device symlink, so HAL can see the device and ConsoleKit sets its ACL permissions for the logged-in user. For em28xx audio capture cards found e.g. in Hauppauge WinTV-HVR-900 (R2), this patch fixes errors like: ALSA lib pcm_hw.c:1429:(_snd_pcm_hw_open) Invalid value for card Error opening audio: Permission denied when running mplayer as a normal user. Priority: normal Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-25em28xx: VideoMate For You USB TV box requires tvaudioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> As reported by Vitaly Wool <vital@embeddedalley.com>: > about half a year ago I posted the patch that basically enabled Compro > VideoMate For You USB TV box support. > The main problem is I couldn't get the sound working. > So I kind of decomposed the box and found out the audio decoder chip > used there was Philips TDA9874A. As far as I can see, it's not supported > within the em28xx suite although it is for other TV tuner drivers. A tvaudio modprobing confirms that tda9874a chip is accessible via i2c: tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840, tda9873h, tda9874h/a, tda9850, tda9855, tea6300, tea6320, tea6420, tda8425, pic16c54 (PV951), ta8874z tvaudio' 1-0058: chip found @ 0xb0 tvaudio' 1-0058: tvaudio': chip_read2: reg254=0x11 tvaudio' 1-0058: tvaudio': chip_read2: reg255=0x2 tvaudio' 1-0058: tda9874a_checkit(): DIC=0x11, SIC=0x2. tvaudio' 1-0058: found tda9874a. tvaudio' 1-0058: tda9874h/a found @ 0xb0 (em28xx #0) tvaudio' 1-0058: tda9874h/a: chip_write: reg0=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg1=0xc0 tvaudio' 1-0058: tda9874h/a: chip_write: reg2=0x2 tvaudio' 1-0058: tda9874h/a: chip_write: reg11=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg12=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg13=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg14=0x1 tvaudio' 1-0058: tda9874h/a: chip_write: reg15=0x0 tvaudio' 1-0058: tda9874h/a: chip_write: reg16=0x14 tvaudio' 1-0058: tda9874h/a: chip_write: reg17=0x50 tvaudio' 1-0058: tda9874h/a: chip_write: reg18=0xf9 tvaudio' 1-0058: tda9874h/a: chip_write: reg19=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg20=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg24=0x80 tvaudio' 1-0058: tda9874h/a: chip_write: reg255=0x0 tvaudio' 1-0058: tda9874a_setup(): A2, B/G [0x00]. tvaudio' 1-0058: tda9874h/a: thread started] This patch automatically loads tvaudio when needed (currently, only with this board). Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-12em28xx-cards: Add Pinnacle Dazzle Video Creator Plus DVC107 descriptionDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added board Pinnacle Dazzle Video Creator Plus DVC107 to name description field. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-12em28xx: CodingStyle fixesDouglas Schilling Landgraf
From: Nicola Soranzo <nsoranzo@tiscali.it> Coding style fixes for recent changesets in em28xx. Priority: normal Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-11em28xx: support added for IO-DATA GV/MVP SZ - EMPIA-2820 chipsetDouglas Schilling Landgraf
From: Indika Katugampala <indika_20012001@yahoo.co.jp> Priority: normal Signed-off-by: Indika Katugampala <indika_20012001@yahoo.co.jp> [dougsland@redhat.com: Fixed CodingStyle] Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-12merge: http://linuxtv.org/hg/~dougsland/v4l2-em28xxMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-11em28xx: Add support for Easy Cap Capture DC-60Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-11Adds IR table for the IR provided with this board and includes it atMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Kaiomy entry. Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-11em28xx: Add support for Kaiomy TVnPC U2 stickMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Thanks to Peter Senna Tschudin <peter.senna@gmail.com> for borrow me one of those devices. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-11em28xx: Coding style fixes and a typo correctionDouglas Schilling Landgraf
From: Nicola Soranzo <nsoranzo@tiscali.it> Lots of coding style fixes and a typo correction for em28xx. Priority: normal Signed-off-by: Nicola Soranzo <nsoranzo@tiscali.it> [dougsland@redhat.com: fixed a reject due to a change on em28xx-audio.c] Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-10em28xx: Add DVC 101 model to Pinnacle Dazzle descriptionDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added DVC 101 model to Pinnacle Dazzle description Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx-audio: Add macros EM28XX_START_AUDIO / EM28XX_STOP_AUDIODouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added macros EM28XX_START_AUDIO and EM28XX_STOP_AUDIO for em28xx_cmd(). Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx-audio: replace printk with em28xx_errdevDouglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Patch removes printk and place em28xx_errdev macros to provide information about driver name to dmesg. Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx-audio: Add lock for usersDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added lock for users count Priority: high Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx-audio: Add spinlock for triggerDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added spinlock for trigger session Priority: high Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx: Fix for em28xx audio startupDouglas Schilling Landgraf
From: Robert Krakora <rob.krakora@messagenetsystems.com> Essentially if a snd_em28xx_capture_trigger() stop followed by a snd_em28xx_capture_trigger() start would not yield any data because there was some logic put in with an adev->shutdown variable which did not seem warranted in my humble opinion. It would cause snd_em28xx_capture_trigger start never to start up the audio stream until the device was closed and reopened again. Upon re-opening the device adev->shutdown is reset and audio data would again flow. Priority: high Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx: Fix for em28xx memory leak and function renameDouglas Schilling Landgraf
From: Robert Krakora <rob.krakora@messagenetsystems.com> Fix for em28xx memory leak and function rename Priority: high Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx: remove bad check (changeset a31c595188af)Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Removed bad check. Thanks to Robert Krakora <rob.krakora@messagenetsystems.com> to report that. Priority: high Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-27merge: http://linuxtv.org/hg/~dougsland/em28xx/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-25em28xx: Add check before call em28xx_isoc_audio_deinit()Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Just call em28xx_isoc_audio_deinit() if em28xx sent a usb_submit(). Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-25em28xx: fix spacesDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Fixed spaces Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-25em28xx: Fix for fail to submit URB with IRQs and Pre-emption DisabledDouglas Schilling Landgraf
From: Robert Krakora <rob.krakora@messagenetsystems.com> Trace: (Provided by Douglas) BUG: sleeping function called from invalid context at drivers/usb/core/urb.c:558 in_atomic():0, irqs_disabled():1 Pid: 4918, comm: sox Not tainted 2.6.27.5 #1 [<c04246d8>] __might_sleep+0xc6/0xcb [<c058c8b0>] usb_kill_urb+0x1a/0xd8 [<c0488e68>] ? __kmalloc+0x9b/0xfc [<c0488e85>] ? __kmalloc+0xb8/0xfc [<c058cd5a>] ? usb_alloc_urb+0xf/0x31 [<f8dd638c>] em28xx_isoc_audio_deinit+0x2f/0x6c [em28xx_alsa] [<f8dd6573>] em28xx_cmd+0x1aa/0x1c5 [em28xx_alsa] [<f8dd65e1>] snd_em28xx_capture_trigger+0x53/0x68 [em28xx_alsa] [<f8aa8674>] snd_pcm_do_start+0x1c/0x23 [snd_pcm] [<f8aa85d7>] snd_pcm_action_single+0x25/0x4b [snd_pcm] [<f8aa9833>] snd_pcm_action+0x6a/0x76 [snd_pcm] [<f8aa98f5>] snd_pcm_start+0x14/0x16 [snd_pcm] [<f8aae10e>] snd_pcm_lib_read1+0x66/0x273 [snd_pcm] [<f8aac5a3>] ? snd_pcm_kernel_ioctl+0x46/0x5f [snd_pcm] [<f8aae4a7>] snd_pcm_lib_read+0xbf/0xcd [snd_pcm] [<f8aad774>] ? snd_pcm_lib_read_transfer+0x0/0xaf [snd_pcm] [<f89feeb6>] snd_pcm_oss_read3+0x99/0xdc [snd_pcm_oss] [<f89fef9c>] snd_pcm_oss_read2+0xa3/0xbf [snd_pcm_oss] [<c064169d>] ? _cond_resched+0x8/0x32 [<f89ff0be>] snd_pcm_oss_read+0x106/0x150 [snd_pcm_oss] [<f89fefb8>] ? snd_pcm_oss_read+0x0/0x150 [snd_pcm_oss] [<c048c6e2>] vfs_read+0x81/0xdc [<c048c7d6>] sys_read+0x3b/0x60 [<c04039bf>] sysenter_do_call+0x12/0x34 ======================= The culprit in the trace is snd_pcm_action() which invokes a spin lock which disables pre-emption which disables an IRQ which causes the __might_sleep() function to fail the irqs_disabled() test. Since pre-emption is enabled then it is safe to de-allocate the memory if you first unlink each URB. In this instance you are safe since pre-emption is disabled. If pre-emption and irqs are not disabled then call usb_kill_urb(), else call usb_unlink_urb(). Thanks to Douglas for tracking down this bug originally!!! Priority: high Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> [dougsland@redhat.com: Fixed codyingstyle] Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-25em28xx: Correct mailing listDouglas Schilling Landgraf
From: Alexey Klimov <klimov.linux@gmail.com> Move development mail-list to linux-media on vger.kernel.org. Priority: normal Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-20em28xx: use usb_make_path to report bus infoThierry MERLE
From: Thierry MERLE <thierry.merle@free.fr> usb_make_path reports canonical bus info. Use it when reporting bus info in VIDIOC_QUERYCAP. Priority: normal Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
2009-01-19em28xx: Add entry for GADMEI TVR200Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Added entry for GADMEI TVR200. Thanks to Yohanes Nugroho <yohanes@gmail.com> for testing and data collection. Priority: normal Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-01-18merge: http://linuxtv.org/hg/~dheitmueller/v4l-dvb-em28xx-audio-panic/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-18em28xx: Fix for KWorld 330U BoardMauro Carvalho Chehab
From: Robert Krakora <rob.krakora@messagenetsystems.com> Fix for KWorld 330U Board Many thanks to Devin and Mauro!!! Priority: normal Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-18em28xx: Fix for KWorld 330U AC97Mauro Carvalho Chehab
From: Robert Krakora <rob.krakora@messagenetsystems.com> Fix for KWorld 330U AC97 Many thanks to Devin and Mauro again!!! Priority: normal Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-18em28xx: Clock (XCLK) CleanupMauro Carvalho Chehab
From: Robert Krakora <rob.krakora@messagenetsystems.com> Clock (XCLK) Cleanup Priority: normal Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-17em28xx: fix kernel panic on audio shutdownDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Revert a change made in change 9743 which resulted in a kernel panic in some cases on shutdown of the audio stream. First discovered when working on the Pinnacle 880e support, and later reproduced by a user on the mailing list with the HVR-900 as well. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-01-16em28xx: Fix audio URB transfer buffer race conditionMauro Carvalho Chehab
From: Robert Krakora <rob.krakora@messagenetsystems.com> em28xx: Fix audio URB transfer buffer memory leak and race condition/corruption of capture pointer Leak fix kindly contributed by Pádraig Brady. Priority: normal Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-17em28xx: fix compile warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-01-12em28xx: fix audio output PCM IN selectionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However, currently, the PCM IN selection is not set by the driver. This patch allows specifying the PCM IN expected output, via board description table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-07em28xx: fix input selectionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> em28xx were trying to access the third input entry, even for boards that don't support it. This patch reviews the input mux selection fixing this bug and a few other troubles, like not validating the input on one userspace ioctl. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-03Use negated usb_endpoint_xfer_control, etcMauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> This patch extends 134179823b3ca9c8b98e0631906459dbb022ff9b by using usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk, and usb_endpoint_xfer_int in the negated case as well. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\)) + !usb_endpoint_xfer_control(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\)) + !usb_endpoint_xfer_isoc(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\)) + !usb_endpoint_xfer_bulk(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\)) + !usb_endpoint_xfer_int(epd) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-05From: Mauro Carvalho Chehab <mchehab@redhat.com>Mauro Carvalho Chehab
/home/v4l/master/v4l/em28xx-core.c:396:25: warning: symbol 'outputs' was not declared. Should it be static? /home/v4l/master/v4l/em28xx-input.c:324:6: warning: symbol 'em28xx_ir_start' was not declared. Should it be static? /home/v4l/master/v4l/em28xx-cards.c:1925:5: warning: symbol 'em28xx_init_dev' was not declared. Should it be static? Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31em28xx: allocate adev together with struct em28xx devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Some devices require different setups on struct_audio. Due to that, we may need to change some fields at dev.adev during device probe. So, this patch moves the dynamic memory allocation of adev at em28xx-alsa to the dynamic allocation of struct em28xx dev that happens during device probe. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-31em28xx: update chip id for em2710Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 22:30:44 +0000