summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/gspca
AgeCommit message (Collapse)Author
2008-08-29merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Have a bigger buffer for sn9c10x compressed images.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Cleanup the sonixb code.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28gspca: Bad pixelformat of vc0321 webcams.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28gspca: Resolve webcam conflicts between some drivers.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-27gspca: Move some probe code to the new init function.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-27gspca: Have a clean kmalloc-ated buffer for USB exchanges.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Set the clock at the end of initialization in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Stop pac7302 autogain oscillation.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Webcam Labtec 2200 (093a:2626) added in pac7311.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: More controls for pac73xx and new webcam 093a:2624.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Too much code removed in the suspend/resume changeset.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - the stream must stop when the main application closes the device. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: H and V flips work for ov7670 only in ov519.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Change some subdriver functions for suspend/resume.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: Change initialization and gamma of zc3xx - pas106.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: Initialize the ov519 at open time and source cleanup.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: Reinitialize the device on resume.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: LED and proble changes in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> - turn the led of the cam off after plugging in the cam - move the probe code from open to config, so that if the probe fails we never register Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: Set disabled ctrls and fix a register pb with ovxxxx in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> - set some controls as disabled instead of copying the device descr. - in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after) using it to calculate reg 10. - disable brightness (instead of ignoring it) for the TAS5110. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-24gspca: Fix problems with disabled controls.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-23gspca: Set DISABLED the disabled controls at query control time.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-23gspca: Adjust SOF detection for pac73xx.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-23gspca: Do pac73xx webcams work.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> - documentation for some registers - some preparations for adding autogain_n_exposure functionality - various pac7311 fixes - disable brightness and colors controls for 7311 - fix contrast control for 7311 - add hflip and vflip controls for 7311 - minimal jpeg header - proper SOF detection Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-23v4l-dvb: fix a bunch of sparse warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-22gspca: Compile error when CONFIG_PM not defined.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-22gspca: Revert the previous patch (sensor upside down).Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-22gspca: V4L2_CAP_SENSOR_UPSIDE_DOWN added as a cap for some webcams.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> This patch adds a V4L2_CAP_SENSOR_UPSIDE_DOWN flag to the capabilities flags, and sets this flag for the Philips SPC200NC cam (which has its sensor installed upside down). The same flag is also needed and added for the Philips SPC300NC. Together with a patch to libv4l which adds flipping the image in software this fixes the upside down display with the SPC200NC cam. Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-21gspca: Have VIDIOC_QUERYCTRL more compliant to the spec.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - return -EINVAL when control not supported. - start the private controls at V4L2_CID_PRIVATE_BASE. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-21gspca: suspend/resume added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-21gspca: Frame buffer too small for small resolutions (sonixj and t613).Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-21gspca: Bad start of sn9c110 and sensor ov7630.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-19gspca: Bad start of sn9c110 and sensor om6802.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-19gspca: Bad color control again in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-19gspca: Bad start of sonixj webcams since changeset a8779025e7e8.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-18gspca: Bad controls and quantization table of pac7311.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Patch adapted from a gspca v1 patch by Thomas Kaiser. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-18gspca: Bad color control in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-18gspca: Fix initialization and controls of sn9x110 - ov7630.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-15gspca: Colors, hflip and vflip controls added for pac7302.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-15Make contrast and brightness work for pac7302.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-14gspca: Adjust some control limits in spca561.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-14gspca: Do controls work for spca561 revision 12a.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-14gspca: Pixmap PJPG (Pixart 73xx JPEG) added, generated by pac7311.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The JPEG frames generated by the Pixart 73xx have: - special markers 'ff ff ff xx' every 1024/512 bytes, - unused 8 bits at end of JPEG blocks, and then ask for a new pixel format. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-11gspca: Webcam 0c45:612e added in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-11gspca: Bad frame scanning again and bad init in pac7311.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-11gspca: Big rewrite of spca561.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Bug register/value inversions in USB exchanges. Exposure and gain controls added for rev 12a. Separate the functions and controls of the revisions 12a and 72a. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-11gspca: Remove the unused field 'dev_name' of the device structure.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-08gspca: Add white balance control for spca561 rev 012A.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-08gspca: Conflict GSPCA / ET61X251 for the webcam 102c:6251.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Fix a double handling of 102c:6251 and no handling of 102c:6151 when both drivers GSPCA and ET61X251. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-08gspca: Bad probe of Z-Star/Vimicro webcams with pas106 sensor.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> This patch moves the detection of the 2wr SIF pas106b sensor to before detecting other sensors. Patch change by jfm: Check SIF for identified webcams only. Priority: normal Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 21:03:01 +0000