summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv/ivtv-driver.c
AgeCommit message (Collapse)Author
2007-07-17ivtv: cleanup of driver messagesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: don't recompile needlesslyHans Verkuil
From: Alexey Dobriyan <adobriyan@sw.ru> Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: add high volume debugging flagHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: Add locking to ensure stream setup is atomic.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix converity warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-19Move big PIO accesses from the interrupt handler to a workhandlerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Sliced VBI transfers use PIO instead of DMA. This was done inside the interrupt handler, but since PIO accesses are very slow this meant that a lot of time was spent inside the interrupt handler. All PIO copies are now moved to a workqueue. This should fix various issues with missing time ticks and remote key hits. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-18Models 30012-30039 are for a low profile PVR250, not PVR150.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Autodetect new PVR150 low profile cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-01MEDIA: Spinlock initializer cleanupMauro Carvalho Chehab
From: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-16Fix ivtv yuv threshold handlingHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-13The TV standard should be set AFTER the TV output is fully initialized.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Initialize the inputs before registering the devices.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11First unregister the driver, and then free the memory.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use spin_lock_init to fix lockdep warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add comment why the symbols are exported.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Merges VBI & YUV handling into a single work queue.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03If possible make vars/functions static.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03Replace SA_* with IRQF_*Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> SA_* interrupt flags are being phased out, update to newer flags. Thanks to Maarten Maathuis for pointing this out to me. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-27Set initial global_alpha to 255 (opaque).Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An opaque rather than transparent OSD lets it be used as a framebuffer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-27Fix comment style and set default debug level to 0Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Convert the '//' comments to kernel approved /* */ style comments. Set the default debug level to 0. As a result of which change some DEBUG_WARNs to errors or remove them altogether. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-26Add ivtv driver for the Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 09:00:32 +0000