summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv/ivtv-i2c.c
AgeCommit message (Collapse)Author
2008-11-29ivtv/ivtvfb: convert to v4l2_device/v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-11-25fix boards for kernels with algo_controlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> changeset 4ecae6da8244 removed algo_control from i2c drivers. However, on older kernels, a dummy function to implement algo_control is required, otherwise, an OOPS is generated. This patch adds a backport for all i2c drivers that defines an i2c_algorithm, except for cafe_ccic, since OLPC hardware only works for kernels newer than 2.6.19. Some of the backported drivers would need also extra changes to work with older kernels, as specified on v4l/versions.txt. Yet, I decided to add the backport for those drivers also, since the lack of algo_control doesn't generate any compilation error, but it is enough to break the driver. So, better to all for all boards than to allow compiling a kernel backported that just generates OOPS. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-19ivtvfb: FB_BLANK_POWERDOWN turns off video outputHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> When using FBIOBLANK, FB_BLANK_POWERDOWN will now switch off the video output. Since some televisions turn themselves off after a while with no signal, this is the closest we can get to power-saving. Priority: normal Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-09-08ivtv: fix broken saa7127 load on kernels < 2.6.26.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Martin Dauskardt for finding this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30v4l: fix assorted compile warnings/errorsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> BIT define conflicts on kernels < 2.6.24, byteorder/swab.h doesn't need to be included at all. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-17saa7127: Make device detection optionalHans Verkuil
From: Jean Delvare <khali@linux-fr.org> The saa7127 driver supports all of SAA7126, SAA7127, SAA7128 and SAA1729 devices. Declare all these devices, so that board drivers can tell which device is present, instead of always relying on auto-detection (which needs to write to the chip, eek!). We still need the detection for ivtv, so a special device name "saa7127_auto" can be used when the caller doesn't know exactly which device is present. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-07-08v4l-dvb: remove support for kernels < 2.6.10Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Phase 2 removes support for kernels < 2.6.10. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-06-05Backport ivtv i2c changes to better work with the newer I2C codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-06-05backport I2C changes on several filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Some I2C API change patches were committed at kernel. Backport those changes to V4L/DVB tree. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26ivtv: use strlcpy instead of strcpy.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-07ivtv: the upd* modules have to be probed to properly autodetect some cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-24ivtv: udelay has to be changed *after* the eeprom was read, not beforeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The eeprom decides which Hauppauge model it is, so the decision whether to use an udelay of 5 or 10 needs to be taken after reading the eeprom, not before. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-22ivtv: drop an incorrect commentHans Verkuil
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-22ivtv: add XC2028 support for Club3D cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-21ivtv: mspx4xx needs a longer i2c udelayHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-11 ivtv/ section fixMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: convert to bus-based i2c API.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-11-02backport changeset bb374b7b938f73666c403b201b3dd48ec9fe118aMauro Carvalho Chehab
kernel-sync: Author: David Miller <davem@davemloft.net> Date: Tue Oct 30 21:23:48 2007 -0700 [MEDIA] IVTV: exit_ivtv_i2c() cannot be __devexit It is referenced both from __devinit code (ivtv_probe) and normal .text (ivtv_process_eeprom), and therefore cannot be discarded via __devexit. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-30ivtv: add ASUS Falcon2 supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtv: udelay for the i2c bus was set too highHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An udelay of 5 is sufficient for standard speed i2c busses, 10 make it too slow. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23From: Jean Delvare <khali@linux-fr.org>Mauro Carvalho Chehab
Subject: ivtv: Fix static structure initialization Date: Thu, 23 Aug 2007 19:32:26 +0200 Convert the initialization of ivtv_i2c_algo_template to C99-style. Otherwise a future change to struct i2c_algo_bit_data would break this code. Also declared that structure const - it's a template after all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Add vp27smpx driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: cleanup of driver messagesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: add support to suppress high volume i2c debug messages.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add missing includes.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-07Ivtv warning fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-03If possible make vars/functions static.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-28Fix bogus error messages in ivtv for VIDIOC_G_CHIP_IDENTHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-26Add ivtv driver for the Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 11:08:02 +0000