summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv
AgeCommit message (Collapse)Author
2007-08-26ivtv: move ivtv.h public header to include/linux.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-28ivtvfb: fix an obvious bug in ivtvfb_release_buffers()Hans Verkuil
From: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-28ivtvfb: replace ivtv_fb prefix to ivtvfb, change warning to info message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtvfb: rename some missed ivtv-fb references to ivtvfb.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtvfb: renamed ivtv-fb to ivtvfb, move header to include/linuxHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The convention for framebuffer devices is to call them xxxfb, not xxx-fb. Conform to this. Also move the ivtvfb.h header to include/linux: it is a public header. The FBIO_WAITFORVSYNC ioctl is now also defined in the ivtvfb.h header, no more need to include matroxfb.h for just this ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-26ivtv-fb: add missing FBIO_WAITFORVSYNC ioctl defineHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: finish VBI related cleanup.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: VBI cleanups and fixesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Besides some VBI cleanups this patch also fixes a subtle problem with the VBI re-insertion stream where the PIO work handler wasn't called quickly enough, resulting in occasional corrupt data. Furthermore the CC output didn't disable CC correctly and at the right time, causing duplicates to be sent. An saa7127 fix for VPS output was also added: the wrong data was sent. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv/ivtv-fb: improve locking to prevent ivtv/ivtv-fb initialization problems.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-27merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-26ivtv: udelay for the i2c bus was set too highHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An udelay of 5 is sufficient for standard speed i2c busses, 10 make it too slow. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-25ivtv: use new videodev2.h pixel formatsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-24merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-24ivtv: kzalloc() returns void pointer, no need to castHans Verkuil
From: Jesper Juhl <jesper.juhl@gmail.com> Since kzalloc() returns a void pointer, we don't need to cast the return value in drivers/media/video/ivtv/ivtv-queue.c Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-24ivtv: set correct pixel format and alpha properties in VIDIOC_G_FBUFHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: fix V4L2_ENC_CMD_STOP_AT_GOP_END supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Support for V4L2_ENC_CMD_STOP_AT_GOP_END was broken. While the driver correctly waited for the card to capture until the GOP was complete, afterwards the driver buffers were just flushed instead of waiting for the application to read all the pending data. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: fix VIDIOC_G_ENC_INDEX flag handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to a documentation bug (the type mask is 3 bits long, not 2) the wrong frame types were filled in: the B and P frame types were swapped. This bug also hid a second bug: when a capture is stopped a last entry is written into the pgm index buffer with internal type 0, denoting the end of the program. This entry wasn't ignored, instead it was accidentally returned to the caller as a P frame. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: more ivtv-driver.h cleanups.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: reorganized and cleanup ivtv structHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: more cleanups, merged ivtv-audio.c and ivtv-video.c into ivtv-routing.cHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23ivtv: header cleanupHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - add guards - remove unused header includes - move card-specific stuff from ivtv-driver.h to ivtv-cards.h - move YUV-specific stuff from ivtv-driver.h to ivtv-yuv.h Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-22ivtv-fb: correct transparency bit reporting.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-22ivtv: log in status if framebuffer uses YUV instead of RGBHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-21cx2341x: some controls should not be changed while the device is busy.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The driver should now pass the 'busy' state of the device to the cx2341x module whenever controls are set or tried. -EBUSY will be returned if the device is busy and the user attempts to modify certain 'dangerous' controls. It concerns controls that change the audio or video compression mode and bitrates. The cx88-blackbird and pvrusb2 drivers currently always pass '0' (not busy) to the cx2341x, effectively keeping the old behavior for now. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-23From: Jean Delvare <khali@linux-fr.org>Mauro Carvalho Chehab
Subject: ivtv: Fix static structure initialization Date: Thu, 23 Aug 2007 19:32:26 +0200 Convert the initialization of ivtv_i2c_algo_template to C99-style. Otherwise a future change to struct i2c_algo_bit_data would break this code. Also declared that structure const - it's a template after all. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-21Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-20ivtv: prevent changing VBI format while capture is in progress.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Changing the VBI format requires a CX2341X_ENC_INITIALIZE_INPUT firmware call. This can only be done if no capture is in progress. So return -EBUSY if the encoder is busy. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-20ivtv: fix output mode processing: UDMA_YUV wasn't cleared.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - Always clear when stopping the decoder - Clear if the filehandle that is being close was used for UDMA_YUV output. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: add VIDIOC_OVERLAYHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add VIDIOC_OVERLAY to enable/disable the OSD. Also add the OSD state to the log status report. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: fix IVTV_IOC_DMA_FRAME bug introduced by highmem bugfix.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The return value of ivtv_udma_fill_sg_list() was changed by the highmem bugfix, but that return value was still used in ivtv-yuv.c. Revert to the old return value, but in addition return -1 in case of a memory allocation error. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: log stereo/bilingual audio modesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: add support for highmem udmaHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When trying to DMA userspace buffers to the cx23415 you need to check whether the page is in highmem. If this is the case, then bounce buffers have to be used to allow DMA. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv-fb: remove unused header includes.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: move serialization to the fileops level.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Serialization is now done on the open/close/ioctl level and also when the read/write/poll start an encoder/decoder stream. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: improve debug messagesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - add FILE debug flag for open/close/read/write/poll. - show cmd for encoder/decoder command ioctl. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: specify some stream sizes in kB instead of MBHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Some streams (PCM, VBI decoding) do not need that much memory, so specify the allocated memory in kB instead of MB to limit memory usage. E.g. 1 MB is overkill for the VBI decoding stream, 64 kB is enough. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-19ivtv: setup TV output standard on init to prevent flickerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The TV output standard was set only on first use, which meant that the saa7127 was set to NTSC until then, leading to flickering on PAL systems. Since the saa7127 has no firmware it is OK to initialize it immediately. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-18ivtv: fix udma yuv bugHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Using udma yuv causes the driver becomes locked into that mode. This prevents use of the mpeg decoder & non-udma yuv output. This patch clears the operating mode when the device is closed. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-18ivtv: retry/timer improvementsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - Give up frame after three retries. - When the last capture/decode ends, make sure to delete the dma_timer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-18ivtv: fix VBI reinsertion decodingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - Invalid VBI packets should result in an empty VBI frame, not in an zero-sized frame that causes the reader to incorrectly return a 0 (EOF) value. - PIO completion should not reset the sg_pending_size field. - The DMA offset detection code should be ignored for PIO transfers: it somehow messes up the data on the card and is not needed anyway for PIO. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-29ivtv: fix stop stream locking.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-29ivtv: Fix scatter/gather DMA timeoutsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It turns out that the cx23415/6 DMA engine cannot do scatter/gather DMA reliably. Every so often depending on the phase of the moon and your hardware configuration the cx2341x DMA engine simply chokes on it and you have to reboot to get it working again. This change replaced the scatter/gather DMA by single transfers at a time, where the driver is now responsible for DMA-ing each buffer. UDMA is still done using scatter/gather DMA, that will be fixed soon. Many thanks to Mark Bryars <mark.bryars@etvinteractive.com> for discovering the link between scatter/gather and the DMA timeouts. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-28ivtv: always steal full frames if out of buffers.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When there are no more free buffers, then buffers are stolen from the predma queue. Buffers should be stolen from the head of that queue (which is where the most recently added buffers are) and all buffers belonging to a frame should be stolen. Otherwise 'half-frames' would remain in the queue, which leads to ugly playback and complete sync failure for YUV buffers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-18ivtv: fix handling of INITIALIZE_INPUT fw callHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The CX2341X_ENC_INITIALIZE_INPUT firmware call requires careful handling, otherwise the computer can freeze or the top-third of the screen can start flickering. This patch ensures that CX2341X_ENC_INITIALIZE_INPUT is called at the right time and in the right way. In addition the stop capture handling was improved so that the last pending DMA transfer is also processed. Otherwise this would be the first data that arrived when a new capture was started which is not what you want. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-18ivtv: fix incorrect round-robin implementationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-07ivtv: remove unused struct field.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-07ivtv: remove userspace tuner dependent codeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> By request of mchehab I've removed the userspace tuner dependent code. Use my v4l-dvb-xc tree in the meantime for the userspace tuner support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-05ivtv: set correct input for radio for the AverMedia M116 card.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-05ivtv: no need to mute the audio inputHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When changing channels the audio has to be muted. This is done by calling CX2341X_ENC_MUTE_AUDIO and by muted the audio input. The latter is not necessary and is now removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-05ivtv: simplify setting CONFIG_XC3028Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 17:01:47 +0000