summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv
AgeCommit message (Collapse)Author
2007-07-16Clean up schedule_timeout calls in cpia2 and ivtv codeMauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-10ivtv: add high volume debugging flagHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: fix missing signal_pending check.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: Add locking to ensure stream setup is atomic.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix return code of VIDIOC_G/S_FBUF when no framebuffer is present.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix broken VBI output supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The old service_set_out setting was still tested, even though it no longer was ever set and was in fact obsolete. This meant that everything that was written to /dev/vbi16 was ignored. Removed the service_set_out variable altogether and now it works again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix converity warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-07ivtv: fix ia64 printk format warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Add ivtv CROPCAP support and fix ivtv S_CROP for video output.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The VIDIOC_CROPCAP ioctl was missing in ivtv. The handling of output video cropping was wrong. This has now been fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Remove unused V4L2_CAP_VIDEO_OUTPUT_POSHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_CAP_VIDEO_OUTPUT_POS was initially introduced for 2.6.22 but never actually used: remove it before the final 2.6.22 is made. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Remove support for 256 Kb firmware files.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> For backwards compatibility firmware files of 256 Kb were allowed: all drivers have now been updated to support the newer larger firmwares so remove this compatibility code and only support the newer firmware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-21Backed out changeset c7cb1aaec112a3ee7d6483b54d03d6a093754f10Hans Verkuil
2007-05-19Use v4l2_pix_out_fmt instead of v4l2_pix_fmt for video output formatHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Adding top/left fields to v4l2_pix_fmt broke the ABI. To fix this a new v4l2_pix_out_fmt struct was introduced to specify the video output format. This new struct *does* have the additional top/left fields. The V4L2_CAP_VIDEO_OUTPUT_POS capability that was introduced is no longer needed and is removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-19Move big PIO accesses from the interrupt handler to a workhandlerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Sliced VBI transfers use PIO instead of DMA. This was done inside the interrupt handler, but since PIO accesses are very slow this meant that a lot of time was spent inside the interrupt handler. All PIO copies are now moved to a workqueue. This should fix various issues with missing time ticks and remote key hits. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-18Models 30012-30039 are for a low profile PVR250, not PVR150.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Fix audio stuttering for saa711x/ivtv when in radio mode.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Autodetect new PVR150 low profile cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Adding new fields to v4l2_pix_format broke the ABI, reverted that changeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Reverted the change to struct v4l2_pix_format. I completely missed that this struct was used by existing ioctls so that changing it broke the ABI. I will have to think of another way of setting the top/left coordinates but for now this change is reverted to preserve compatibility. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-09Fix Kconfig dependencies for ivtvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As pointed by Geert Uytterhoeven <geert@linux-m68k.org>, ivtv-driver.h have two checks for CONFIG vars, inerited from the time it were an out of kernel driver. Also, ivtv were wrongly marked as dependent of USB. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-02VIDEO4LINUX-2: Replace MINOR() with a call to iminor().Mauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Replace the call to MINOR() with a call to the inline iminor() routine. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01MEDIA: Spinlock initializer cleanupMauro Carvalho Chehab
From: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-10ivtv: fix incorrect bitwise-and for command flags.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-16Fix ivtv yuv threshold handlingHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-13The TV standard should be set AFTER the TV output is fully initialized.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Initialize the inputs before registering the devices.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Once the devices have been registered anyone can start changing the inputs or TV standard before they have been initialized by the driver. This leads to cases were the input is changed in an udev rule, but after that rule is triggered the tail-end of the ivtv driver initialization can override that by selecting the tuner input. The correct sequence is to first setup the input, initial frequency and TV standard before finally registering the video devices. This prevents any udev rules from being triggered prematurely. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11First unregister the driver, and then free the memory.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv_remove which is called by pci_unregister_driver was still using memory that was already freed. Ouch. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use pci_register_driver instead of pci_module_init in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-11Use spin_lock_init to fix lockdep warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Fix VIDIOC_TRY_ENCODER_CMD and VIDEO_TRY_COMMANDHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> VIDIOC_TRY_ENCODER_CMD did the same as VIDIOC_ENCODER_CMD, now it no longer touches the encoder. Both the encoder and decoder commands did not clear the flags field of unknown flags. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Use v4l_printk_ioctl instead of printing the ioctl name for each ioctl in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Using v4l_printk_ioctl saves a lot of code duplication. Also moved a few ioctl cases to another function, improving the ioctl grouping. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add VIDIOC_G/S_PRIORITY support to ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add comment why the symbols are exported.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It is not immediately obvious why the ivtv symbols are exported in ivtv-driver.c since both ivtv-fb and the IR-blaster module are still out-of-tree. Added a comment so people are aware of these issues. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Add missing includes.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Every file should include the headers containing the prototypes for its global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Merges VBI & YUV handling into a single work queue.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-10Set vsync_field correctly in ivtv.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-07Ivtv warning fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> drivers/media/video/ivtv/ivtv-i2c.c:547: warning: initializer-string for array of chars is too long drivers/media/video/ivtv/ivtv-i2c.c:547: warning: (near initialization for 'ivtv_i2c_client_template.name') Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-04ivtv: fix backwards compatibility for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> build failure in 2.6.15: CC [M] ivtv-driver.o ivtv-driver.c: In function 'ivtv_init_struct1': ivtv-driver.c:625: warning: implicit declaration of function 'mutex_init' ivtv-driver.c: In function 'ivtv_probe': ivtv-driver.c:1170: error: 'IRQF_SHARED' undeclared (first use in this function) ivtv-driver.c:1170: error: (Each undeclared identifier is reported only once ivtv-driver.c:1170: error: for each function it appears in.) ivtv-driver.c:1170: error: 'IRQF_DISABLED' undeclared (first use in this function) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-03-03If possible make vars/functions static.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03Add missing IVTV_FB_WARN #defineHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This is needed for ivtv-fb. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03Replace SA_* with IRQF_*Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> SA_* interrupt flags are being phased out, update to newer flags. Thanks to Maarten Maathuis for pointing this out to me. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03Add dependency on VIDEO_V4L1Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> VIDEO_V4L1 is needed to get tvaudio to be built. Stupid really as ivtv is only using the v4l2 API to communicate with tvaudio. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-03Add missing VIDEO_CX25840 dep, remove unused VIDEO_TLV320AIC23B depHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> VIDEO_CX25840 was missing in the ivtv dependencies. VIDEO_TLV320AIC23B was removed since it isn't used by ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-28merge: http://linuxtv.org/hg/~mkrufky/ivtv-compatMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-27ivtv: fix semaphore / mutex compat for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-02-28Fix bogus error messages in ivtv for VIDIOC_G_CHIP_IDENTHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-27Set initial global_alpha to 255 (opaque).Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An opaque rather than transparent OSD lets it be used as a framebuffer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-27Update ivtv VIDIOC_G_CHIP_IDENT.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> ivtv now sets the correct chip ident and returns the correct error codes. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-27Fix comment style and set default debug level to 0Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Convert the '//' comments to kernel approved /* */ style comments. Set the default debug level to 0. As a result of which change some DEBUG_WARNs to errors or remove them altogether. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-02-26Add ivtv driver for the Conexant cx23416/cx23415 MPEG encoder/decoderHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> It took three core maintainers, over four years of work, eight new i2c modules, eleven new V4L2 ioctls, three new DVB video ioctls, a Sliced VBI API, a new MPEG encoder API, an enhanced DVB video MPEG decoding API, major YUV/OSD contributions from Ian and John, web/wiki/svn/trac support from Axel Thimm, (hardware) support from Hauppauge, support and assistance from the v4l-dvb people and the many, many users of ivtv to finally make it possible to merge this driver into the kernel. Thank you all! Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-09 19:05:58 +0000