summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv
AgeCommit message (Collapse)Author
2008-05-24ivtv: bump version to 1.3.0.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-20ivtv: simplify gpio initialization for XCeive tuners.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Separate gpio_init field and xceive_pin and combine the two when the gpio is initialized. So there is no longer any need to set the xceive pin in the gpio_init values, simplifying the creation of a new card definition. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-20ivtv: add support for the Buffalo PC-MV5L/PCI card.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Thanks to Peter Brandt for doing the necessary tests to fill out the card definition! Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-13ivtv/cx18: snprintf fixesHans Verkuil
From: Jean Delvare <khali@linux-fr.org> snprinf() takes the trailing \0 into account in its length calculations, so there is no need to subtract 1 to the buffer size. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12cx18/ivtv: fix open() kernel oopsHans Verkuil
Andy Walls <awalls@radix.net> Upon error conditions in cx18/ivtv_probe(), the code at the 'err:' label leaves a NULL entry in cx18/ivtv_cards[]. This can cause a NULL pointer de-reference in cx18/ivtv_v4l2_open() which is fixed by this patch. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12ivtvfb: Use DMA for write()Hans Verkuil
From: Ian Armstrong <ian@iarmst.co.uk> write() operations to the ivtv framebuffer will now attempt to use DMA if the amount of data to copy is >= 4096 bytes. This change effectively depreciates the need for the proprietary IVTVFB_IOC_DMA_FRAME ioctl since a write() of sufficient size will do the same thing. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-12ivtv/cx18: add compat_ioctl entriesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-06merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-06Fix FW_LOADER depencency at v4l/dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since: 1) FW_LOADER is defined as: config FW_LOADER tristate "Userspace firmware loading support" depends on HOTPLUG 2) several V4L/DVB driver just selects it; 3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER. So, All drivers that select FW_LOADER should also depend on HOTPLUG. An easier solution (for the end-user perspective) would be to "select HOTPLUG". However, live is not simple. This would cause recursive dependency issues like this one: drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD -> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA -> USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-06Re-creates VIDEO_TUNERMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the previous behaviour before the creation of MEDIA_TUNER. Before this patch, tuner.ko were created even for drivers that don't need a tuner (like webcam drivers). Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-02backport commit a6a3a17b7fdaf824e6d73e8e4a94c9d149302f74Mauro Carvalho Chehab
kernel-sync: Author: Harvey Harrison <harvey.harrison@gmail.com> Date: Mon Apr 28 16:50:03 2008 -0700 media: fix integer as NULL pointer warnings drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-01cx18/ivtv: improve and fix out-of-memory handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - don't show kernel backtrace when the allocation of the buffers fails: the normal ivtv/cx18 messages are clear enough and the backtrace scares users. - fix cleanup after the buffer allocation fails (caused kernel panic). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-01ivtv/cx18: fix compile warningsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix compile warnings if MODULE is not defined. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-05-01ivtv: prefix ivtv external functions with ivtv_Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix conflict with cx18 driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-30Use the same name convention for all tuners under common/tunersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Auto generated by this script: for i in `find drivers/media/ -name Kconfig`; do cat $i |\ sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\ sed s,VIDEO_TUNER,MEDIA_TUNER,g |\ sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\ sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\ sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\ sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\ sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\ sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\ sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\ sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\ sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\ sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\ sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\ sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\ sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\ sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done for i in `find drivers/media/ -type f`; do cat $i |\ sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\ sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\ sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\ sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\ sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\ sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\ sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\ sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\ sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\ sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\ sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\ sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\ sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\ sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\ sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\ sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$ mv /tmp/temp_mv$$ $i done Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-28ivtv: correct misspelled "HIMEM4G" to "HIGHMEM4G" in error messageHans Verkuil
From: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-28ivtv: POLLHUP must be returned on eof.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Move tuners to common/tuners There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. This patch moves those common tuners into a common dir. It also moves saa7146 driver into drivers/media/video, where other hybrid drivers are placed. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-26ivtv: add tuner support for the AverMedia M116Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: fix tuner detection for PAL-N/Nc.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase the DMA timeout from 100 to 300 ms.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> When there is a lot of DMA traffic this timeout might sometimes be too low. Increase it to be on the safe side. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: increase version number to 1.2.1.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: fix oops when itv->speed == 0 and VIDEO_CMD_PLAY is called.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add autodetect for the AVermedia M104 cardHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Note that this card is only detected and not yet working. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: use strlcpy instead of strcpy.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: add support for card comments and detected but unsupported cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-26ivtv: change initialization order to fix an oops when device registration ↵Hans Verkuil
failed. From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-20 Fix VIDIOCGAP corruption in ivtvMauro Carvalho Chehab
From: Alan Cox <alan@lxorguk.ukuu.org.uk> Frank Bennett reported that ivtv was causing skype to crash. With help from one of their developers he showed it was a kernel problem. VIDIOCGCAP copies a name into a fixed length buffer - ivtv uses names that are too long and does not truncate them so corrupts a few bytes of the app data area. Possibly the names also want trimming but for now this should fix the corruption case. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-16drivers/media/video: use time_before, time_before_eq, etcMauro Carvalho Chehab
From: Julia Lawall <julia@diku.dk> The functions time_before, time_before_eq, time_after, and time_after_eq are more robust for comparing jiffies against other values. A simplified version of the semantic patch making this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @ change_compare_np @ expression E; @@ ( - jiffies <= E + time_before_eq(jiffies,E) | - jiffies >= E + time_after_eq(jiffies,E) | - jiffies < E + time_before(jiffies,E) | - jiffies > E + time_after(jiffies,E) ) @ include depends on change_compare_np @ @@ @ no_include depends on !include && change_compare_np @ @@ #include <linux/...> + #include <linux/jiffies.h> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-13videobuf: Improve command output for debug purposesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-09saa717x: add new audio/video decoder i2c driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-04-07ivtv: the upd* modules have to be probed to properly autodetect some cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-14 cleanup variable initializationMauro Carvalho Chehab
From: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> flags used for spinlocks don't need to be initialized, except where the compiler has no way to see, that the spin_unlock_irqrestore is only called if the spin_lock_irqsave has been called before. Local variable initialization doesn't have to be protected. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-03-09ivtv: rename tunerhz to tunertypeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> There are two tuner types: those for M/N standards and those for all others. However, M/N standards are not always 60 Hz (PAL-N/Nc are 50 Hz), so rename the module option accordingly. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-09ivtv: fix tunerhz bug: PAL-N(c) is 50 Hz, not 60.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-08ivtv: add support for Japanese variant of the Adaptec AVC-2410.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-08ivtv: improve pal/secam module options, add tunerhz module optionHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Allow options like pal=bgh, improve description of those options. Add tunerhz option: 50=card has 50Hz tuner, 60=card has 60Hz tuner. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-03-06ivtv: fix polling bugHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The q_io queue was never taken into account by the poll function. Thanks to Andy Walls for finding this bug. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-02-26ivtv: Add missing sg_init_table()Hans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> If a dma transfer is attempted for either yuv or framebuffer output, a missing sg_init_table() call causes a kernel BUG in scatterlist.h if CONFIG_DEBUG_SG is set. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-02-21ivtv: start timer for each DMA transferHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The DMA timeout timer was started once for each set of DMA transfers, but it should be started for each single DMA transfer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-02-21ivtv: CROP is not supported for video captureHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> CROPCAP suggests that video capture supports cropping, but this is not the case. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-02-21ivtv: yuv framebuffer trackingHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> The existing yuv code limits output to the display area occupied by the framebuffer. This patch allows the yuv output to be 'detached' via V4L2_FBUF_FLAG_OVERLAY. By default, the yuv output window will be restricted to the framebuffer dimensions and the output position is relative to the top left corner of the framebuffer. This matches the behaviour of previous versions. If V4L2_FBUF_FLAG_OVERLAY is cleared, the yuv output will no longer be linked to the framebuffer. The maximum dimensions are either 720x576 or 720x480 depending on the current broadcast standard, with the output position relative to the top left corner of the display. The framebuffer itself can be resized, moved and panned without affecting the yuv output. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-01-26ivtv: fix for yuv filter table checkHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> As the result of a previous change that delayed the loading of the firmware, the driver can sometimes report a bogus error regarding the yuv output filter table not being found in the firmware. This patch moves the filter table check to ensure it's only done after the firmware has been loaded. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-01-28 ivtv-yuv.c: make 3 functions staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch makes the following needlessly global functions static: - ivtv_yuv_next_free() - ivtv_yuv_setup_frame() - ivtv_yuv_udma_frame() Signed-off-by: Adrian Bunk <bunk@kernel.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-27[PATCH] static memoryDouglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@gmail.com> - Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
2008-01-10ivtv: stick to udelay=10 after allHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Using an udelay of 5 seems to result in problems for several people. For now abandon the udelay value of 5 and stick to 10, even though this will mean a longer load time of the cx2584x firmware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-01-01Fix in-kernel ivtv compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to tuner-xc2028.h, some extra directories should be added at .h search. CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-24ivtv: small textual updateHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-24ivtv: udelay has to be changed *after* the eeprom was read, not beforeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The eeprom decides which Hauppauge model it is, so the decision whether to use an udelay of 5 or 10 needs to be taken after reading the eeprom, not before. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-22ivtv: drop an incorrect commentHans Verkuil
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 18:20:51 +0000