summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv
AgeCommit message (Collapse)Author
2007-07-25ivtv-fb: initializing the framebuffer should trigger ivtv firmware loadHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-25Merge: from hg/~hverkuil/v4l-dvb2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv-fb: improve debug message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv, cx25840: postpone fw load until first use.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: add missing composite input line for ivtv_pci_pg600v2 cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix incorrect fw size report.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: remove dead codeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: improve mailbox responsiveness.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix pause/continue/play handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: update version to 1.1 to mark ivtv-fb support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-21ivtv-fb: cleanups, prevent fw calls in some casesHans Verkuil
From: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20Merge: from masterHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: replace HZ with msecs_to_jiffies.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: Use proper ioctl value.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: cleanups.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20Add ivtv-fb framebuffer driver.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
2007-07-20ivtv: init channel for NTSC_M_JP standard.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-19merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-19Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffiesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18ivtv: fix DMA timeout when capturing VBI + another streamHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The VBI DMA is handled in a special way and is marked with a bit. However, that bit was set at the wrong time and could be cleared by mistake if a PCM (or other) DMA request would arrive before the VBI DMA was completed. So on completion of the VBI DMA the driver no longer knew that that DMA transfer was for VBI data. And this in turn caused havoc with the card's DMA engine. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: fix Kconfig typo and refer to the driver homepage.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: cleanup of driver messagesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: add support to suppress high volume i2c debug messages.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: don't recompile needlesslyHans Verkuil
From: Alexey Dobriyan <adobriyan@sw.ru> Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: fix missing I2C_ALGOBIT config optionHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> I2C_ALGOBIT must also be selected when ivtv is selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: improve API command debuggingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Turn off debugging of API commands that occur during encoding or decoding, unless they are explicitly requested. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-16Clean up schedule_timeout calls in cpia2 and ivtv codeMauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-10ivtv: add high volume debugging flagHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: fix missing signal_pending check.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: Add locking to ensure stream setup is atomic.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix return code of VIDIOC_G/S_FBUF when no framebuffer is present.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix broken VBI output supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The old service_set_out setting was still tested, even though it no longer was ever set and was in fact obsolete. This meant that everything that was written to /dev/vbi16 was ignored. Removed the service_set_out variable altogether and now it works again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix converity warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-07ivtv: fix ia64 printk format warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Add ivtv CROPCAP support and fix ivtv S_CROP for video output.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The VIDIOC_CROPCAP ioctl was missing in ivtv. The handling of output video cropping was wrong. This has now been fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Remove unused V4L2_CAP_VIDEO_OUTPUT_POSHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_CAP_VIDEO_OUTPUT_POS was initially introduced for 2.6.22 but never actually used: remove it before the final 2.6.22 is made. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Remove support for 256 Kb firmware files.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> For backwards compatibility firmware files of 256 Kb were allowed: all drivers have now been updated to support the newer larger firmwares so remove this compatibility code and only support the newer firmware. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-21Backed out changeset c7cb1aaec112a3ee7d6483b54d03d6a093754f10Hans Verkuil
2007-05-19Use v4l2_pix_out_fmt instead of v4l2_pix_fmt for video output formatHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Adding top/left fields to v4l2_pix_fmt broke the ABI. To fix this a new v4l2_pix_out_fmt struct was introduced to specify the video output format. This new struct *does* have the additional top/left fields. The V4L2_CAP_VIDEO_OUTPUT_POS capability that was introduced is no longer needed and is removed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-19Move big PIO accesses from the interrupt handler to a workhandlerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Sliced VBI transfers use PIO instead of DMA. This was done inside the interrupt handler, but since PIO accesses are very slow this meant that a lot of time was spent inside the interrupt handler. All PIO copies are now moved to a workqueue. This should fix various issues with missing time ticks and remote key hits. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-18Models 30012-30039 are for a low profile PVR250, not PVR150.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Fix audio stuttering for saa711x/ivtv when in radio mode.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Autodetect new PVR150 low profile cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-17Adding new fields to v4l2_pix_format broke the ABI, reverted that changeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Reverted the change to struct v4l2_pix_format. I completely missed that this struct was used by existing ioctls so that changing it broke the ABI. I will have to think of another way of setting the top/left coordinates but for now this change is reverted to preserve compatibility. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-09Fix Kconfig dependencies for ivtvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> As pointed by Geert Uytterhoeven <geert@linux-m68k.org>, ivtv-driver.h have two checks for CONFIG vars, inerited from the time it were an out of kernel driver. Also, ivtv were wrongly marked as dependent of USB. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-02VIDEO4LINUX-2: Replace MINOR() with a call to iminor().Mauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Replace the call to MINOR() with a call to the inline iminor() routine. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01MEDIA: Spinlock initializer cleanupMauro Carvalho Chehab
From: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-10ivtv: fix incorrect bitwise-and for command flags.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-03-16Fix ivtv yuv threshold handlingHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Modifies automatic mode selection for yuv playback. Behaviour is now that source video with a vertical resolution below that of the currently set broadcast mode will be treated as progressive. Video with a vertical resolution greater or equal to the current broadcast mode (up to 576 lines) will be treated as interlaced. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 21:30:35 +0000