summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/ivtv
AgeCommit message (Collapse)Author
2007-08-05ivtv: simplify setting CONFIG_XC3028Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: add AverMedia M116, prepare for userspace Xceive tunerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite (different composite input) - Add AVerTV MCE 116 Plus (M116) card - Allow Xceive cards to be used without Xceive support - Update Xceive support to latest userspace tuner (still not on by default, pending inclusion of userspace tuner in the kernel). - Use CONFIG_XC3028 rather than HAVE_XC3028: gentree.pl will remove them automatically. Thanks to Markus Rechberger for help with the userspace tuner support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: make VIDIOC_INT_RESET support smarter.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support to optionally reset the IR and/or the video digitizer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: show card name as well in the LOG_STATUS output.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: attach yuv field order to each frameHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> In the current driver, the field order is global. As soon as it's changed it takes immediate effect. This is a problem when the video changes order mid stream. Although it mostly works okay, the video may judder / flicker. This patch attaches the field order to the frame, so that any buffered frames will not be displayed until the correct field. In the event that the field order is changed mid stream, the driver will ensure that the previous frame is displayed for a minimum of 3 fields. These are the two original fields the frame should have occupied, plus the one extra since the new frame still has to wait for the correct field. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: prevent yuv register updates from being missedHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> The yuv output code always compares the new frame position & size with those of the previous frame. If they are different, a flag is set to request the yuv output registers be updated when the new frame is displayed. If the incoming frames are delivered too fast, exhausting the buffers, the most recent frame already buffered will be discarded. Unfortunately, any update request will also be discarded. If the new frame matches the size & position of the now discarded frame, the yuv registers are not flagged for update & will remain in their old state. This patch preserves the register update flag in the event that a frame is dropped. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv-fb: framebuffer timings no longer locked on module loadHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Framebuffer timings are currently locked to the video format in use when the module is loaded. If the video format is then changed, the timings returned by the framebuffer will be for the original format. This patch ensures that the timings returned reflect the current video format. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: prevent vertical overflow of yuv outputHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> When the video standard is changed, there's no guarantee the framebuffer dimensions are still legal. The yuv output code uses these dimensions to calculate the size & position for the video overlay. If the framebuffer dimensions are now illegal, the output may exceed the vertical limit of the display, causing distortion. This patch adds an additional check to ensure the output doesn't exceed the limits for the current video standard, cropping if required. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: report ivtv version in status log.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-31ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-30ivtv: fix semaphore / mutex compat for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-27Add vp27smpx driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv: set correct crystal frequency of the GVMVPRX cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-25ivtv-fb: initializing the framebuffer should trigger ivtv firmware loadHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-25Merge: from hg/~hverkuil/v4l-dvb2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv-fb: improve debug message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv, cx25840: postpone fw load until first use.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: add missing composite input line for ivtv_pci_pg600v2 cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix incorrect fw size report.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: remove dead codeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: improve mailbox responsiveness.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix pause/continue/play handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: update version to 1.1 to mark ivtv-fb support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-21ivtv-fb: cleanups, prevent fw calls in some casesHans Verkuil
From: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20Merge: from masterHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: replace HZ with msecs_to_jiffies.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: Use proper ioctl value.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: cleanups.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20Add ivtv-fb framebuffer driver.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add the ivtv-fb framebuffer driver for cx23415 devices (currently only the Hauppauge PVR-350 cards). This makes it possible to use the On-Screen Display functionality of these cards, either for menus during MPEG playback, or as a console or X display. Signed-off-by: Kevin Thayer <nufan_wfk@yahoo.com> Signed-off-by: Chris Kennedy <c@groovy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: John P Harvey <john.p.harvey@btinternet.com> Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk>
2007-07-20ivtv: init channel for NTSC_M_JP standard.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-19merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-19Remove usage of HZ on ivtv driver, replacing by msecs_to_jiffiesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18ivtv: fix DMA timeout when capturing VBI + another streamHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The VBI DMA is handled in a special way and is marked with a bit. However, that bit was set at the wrong time and could be cleared by mistake if a PCM (or other) DMA request would arrive before the VBI DMA was completed. So on completion of the VBI DMA the driver no longer knew that that DMA transfer was for VBI data. And this in turn caused havoc with the card's DMA engine. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: fix Kconfig typo and refer to the driver homepage.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: cleanup of driver messagesHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: add support to suppress high volume i2c debug messages.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: don't recompile needlesslyHans Verkuil
From: Alexey Dobriyan <adobriyan@sw.ru> Driver prints banner including kernel version. Was a leftover from when the driver was standalone. Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: fix missing I2C_ALGOBIT config optionHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> I2C_ALGOBIT must also be selected when ivtv is selected. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-17ivtv: improve API command debuggingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Turn off debugging of API commands that occur during encoding or decoding, unless they are explicitly requested. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-16Clean up schedule_timeout calls in cpia2 and ivtv codeMauro Carvalho Chehab
From: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-10ivtv: add high volume debugging flagHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for high volume debug messages, allowing them to be turned on selectively. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: fix missing signal_pending check.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-10ivtv: Add locking to ensure stream setup is atomic.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Starting an MPEG and VBI capture simultaneously caused errors in the VBI setup: this setup was done twice when it should be done only for the first stream that is opened. Added a mutex to prevent this from happening. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix return code of VIDIOC_G/S_FBUF when no framebuffer is present.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix broken VBI output supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The old service_set_out setting was still tested, even though it no longer was ever set and was in fact obsolete. This meant that everything that was written to /dev/vbi16 was ignored. Removed the service_set_out variable altogether and now it works again. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-16ivtv: fix converity warningHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-06-07ivtv: fix ia64 printk format warnings.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Add ivtv CROPCAP support and fix ivtv S_CROP for video output.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The VIDIOC_CROPCAP ioctl was missing in ivtv. The handling of output video cropping was wrong. This has now been fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-05-29Remove unused V4L2_CAP_VIDEO_OUTPUT_POSHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_CAP_VIDEO_OUTPUT_POS was initially introduced for 2.6.22 but never actually used: remove it before the final 2.6.22 is made. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 19:13:12 +0000