summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/saa7134/saa7134-dvb.c
AgeCommit message (Collapse)Author
2006-08-05whitespace cleanups for cx88-dvb and saa7134-dvbMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch cleans up some whitespace problems after the dvb_attach changes in cx88-dvb.c and saa7134-dvb.c, and converts some capitalized i2c address constants to lowercase. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-08-05fix dvb_pll_attach for nxt2004-based cardsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> The test in dvb-pll to see if a tuner's PLL responds when attaching fails on NXT2004 based boards before the firmware is loaded. This patch allows us to avoid this test by not passing an I2C bus handle to the dvb_pll_attach routine, just as Chris Pascoe has done for MT352 and ZL10353 based boards when used in cx88-dvb. CC: Chris Pascoe <c.pascoe@itee.uq.edu.au> CC: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-30Add support for Acorp TV134DS + FlyDVB-S cards.Andrew de Quincey
From: Igor M. Liplianin <liplianin@me.by> Add support for Acorp TV134DS and FlyDVB-S cards (both based on tda10086+tda826x) Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-28Remove frontend selection from cx88/saa7134 driversAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Replaced with dvb_attach() Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Convert DVB devices to use dvb_attach()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-15added support for the md8800 quadro boardHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-05-19Fix broken DVB drivers caused by a recent mergeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-19merge: http://linuxtv.org/hg/~quincy/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-16Fix Pinnacle 300iAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I had broken the mt352 tuning when a non-directly connected PLL was used - uncommon, but this is what is used on the pinnacle card. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-05-14Change dvb_frontend_ops to be a real field instead of a pointer field inside ↵Patrick Boettcher
dvb_frontend From: Patrick Boettcher <pb@linuxtv.org> The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
2006-04-28Add missing pll gate control callsAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> I'd missed some of these out, breaking the av7110 tuning. I then checked for more and added them in where necessary. They may not actually be necessary in all these locations, but if not, they'll simply have no effect. Add small delay to stv0299 pll gate control to fix tuning problems. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-20Additional frontend_init safety checksAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Don't try and set the tuner ops if the demod was not detected. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-19Convert calls from _pllbuf() to _calc_reg()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Johannes Stezenbach suggested this change - definite improvement. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-18Convert saa7134-dvb to refactored tuner codeAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Rename pll calls to appropriate tuner calls. Remove pll functions from demod structures. Hook tuner call into tuner_ops. Attach dvb-pll where possible. Add pll gate control calls where appropriate. Move europa specific code from tda1104x into card driver using ops overrides (this is how it should ebe done instead of hacking card specific code into the demod driver). Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-04-11Since we are not using CVS, $Id makes no sense anymoreMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-10Add sysfs device links to dvb devicesAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Currently in /sys/class/dvb/dvbX.demuxY/ we have: dev uevent With the patch, we have (for a PCI DVB device): dev device -> ../../../devices/pci0000:00/0000:00:1e.0/0000:03:0d.0 uevent So userspace tools can (finally) work out which physical device a DVB adapter refers to. Previously you had to kinda look through dmesg and hope that it hadn't been dumped out of the buffer. This makes debugging a lot easier if the system has been up for a long time! This is done by adding an extra 'struct device *' parameter to dvb_register_adapter(). It will work with any kind of standard linux 'device'. Additionally, if someone has an embedded system which does things differently, they can simply supply 'NULL' and the behaviour will be as before - the link will simply not appear. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Ack'd-by: Manu Abraham <manu@linuxtv.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org>
2006-03-28Added support for the new Lifeview hybrid cardbus modulesHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> There seem to be many variants of this cards with different feature sets. This entry supports analog TV, CVBS and s-video input, FM radio and DVB-T if they are supported by the hardware. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-28Coding style fixes in saa7134-dvb.cHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> deleted 2 semicolons at end of functions Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-26Merge hhackmann treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixed a missing ; at the end of a function Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-23Add DVB-T support for the LifeView DVB Trio PCI cardHartmut Hackmann
From: Nico Sabbi <nsabbi@tiscali.it> This patch adds DVB-T support, no DVB-S yet Signed-off-by: Nico Sabbi <nsabbi@tiscali.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-23Fixed Pinnacle 300i DVB-T support Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> - fixed tda9886 port 2 setting - turned remote control receiver off via saa7134 GPIO to avoid i2c hangs - modified tda9886 client calls to direct i2c access to allow proper return to analog mode - allow mode change to V4L2_TUNER_DIGITAL_TV in tuner VIDIOC_S_FREQUENCY client call Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-15KWorld ATSC110: implement set_pll_inputMichael Krufky
From: Curt Meyers <cmeyers@boilerbots.com> - When tuning VSB, use ANT input - When tuning QAM, use CABLE input Signed-off-by: Curt Meyers <cmeyers@boilerbots.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-15Add support for Kworld ATSC110Michael Krufky
From: Andrew Burri <andrew.burri@gmail.com> Signed-off-by: Andrew Burri <andrew.burri@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-02-06Added support for the Tevion DVB-T 220RF cardHartmut Hackmann
From: Peter Hartshorn <p3r@users.sourceforge.net> This is a analog / digital hybrid card Signed-off-by: Peter Hartshorn <p3r@users.sourceforge.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03Added support for the ADS Instant TV DUO Cardbus PTV331Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog and DVB-T are working, Remote not yet. This card is based on the new LifeView design, there should be many variants. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-02-03Added support for the LifeView FlyDVB-T LR301 cardHartmut Hackmann
From: Giampiero Giancipoli <gianci@libero.it> Additionally to the card support, this changeset adds the option tda10046lifeview to get_dvb_firmware to download tda10046 firmware from LifeView's site. Signed-off-by: Giampiero Giancipoli <gianci@libero.it> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-31Updated Avermedia 777 DVB-T to use dvb-pllHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> linux/drivers/media/dvb/frontends/dvb-pll.c linux/drivers/media/dvb/frontends/dvb-pll.h - added td1316 tuner linux/drivers/media/video/saa7134/saa7134-dvb.c - changed tuning code for AverTV 777 to use dvb-pll Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-30Add support for the Avermedia 777 DVB-T cardHartmut Hackmann
From: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-01-19Mark Typhoon cards as Lifeview OEM'sNickolay V. Shmyrev
From: Peter Missel <peter.missel@onlinehome.de> * linux/Documentation/video4linux/CARDLIST.saa7134: * linux/drivers/media/video/saa7134/saa7134-cards.c: (saa7134_board_init1): * linux/drivers/media/video/saa7134/saa7134-dvb.c: (dvb_init): * linux/drivers/media/video/saa7134/saa7134.h: - mark Typhoon cards as OEM of Lifeview. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
2006-01-01ioctls cleanups.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br> - Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-04 - Added support for NTSC 4.43 video standard.Mauro Carvalho Chehab
Signed-off-by: Tyler Trafford <tatrafford@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-04 - Updated CARDLIST and strip trailing whitespace.Michael Krufky
2005-11-03 - added dvb-t support for Asus P7134 DualHartmut Hackmann
- added pci id for ADS Tech Instant TV cardbus variant Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
2005-11-03 * ../linux/Documentation/video4linux/CARDLIST.saa7134:Nickolay V. Shmyrev
* ../linux/drivers/media/video/saa7134/saa7134-cards.c: * ../linux/drivers/media/video/saa7134/saa7134-dvb.c: (philips_tda827xa_pll_set), (philips_tda827xa_pll_sleep): * ../linux/drivers/media/video/saa7134/saa7134-input.c: (saa7134_input_init1): - Remote and more info for PCTV Cardbus. Whitespace cleanup. Signed-off-by: Pavel Mihaylov <bin@bash.info>
2005-11-02 - Added dvb support for tda8275a (Philips Tiger reference design)Hartmut Hackmann
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
2005-10-27 Added DVB support for AVerMedia AVerTVHD MCE A180Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-10-16- Whitespaces Cleanups.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-10-16- Whitespace Cleanups.Mauro Carvalho Chehab
- Whitespace script improved. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-09-21 * compat.h:Michael Krufky
* cx88-dvb.c: * saa7134-dvb.c: * scripts/merge-trees.sh: * scripts/unmerge-trees.sh: - move some #if kernel version into compat.h Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-09-12added support for the following cards:Hartmut Hackmann
- Philips EUROPA reference desigh - Compro VideoMate DVB-T300 - Compro VideoMate DVB-T200 (initial) Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
2005-08-30#include <linux/config.h> no longer needed.Michael Krufky
2005-07-25Undo accidental change in previous commit.Michael Krufky
2005-07-25Rename lgdt3302 to lgdt330x.Michael Krufky
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-07-24 * cx88-dvb.c, saa7134-dvb.c, Makefile:Michael Krufky
- The #define CONFIG_DVB_* are actually CFLAGS set my Makefile. CONFIG_* namespace is reserved for Kconfig. This renames them back to HAVE_*. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-07-23 * cx88-dvb.c, saa7134-dvb.c:Michael Krufky
* scripts/merge-trees.sh, scripts/unmerge-trees.sh: - fix compilation warning for missing lgdt3302 when compiling against kernel 2.6.12 without DVB tree. - replaced #IF CONFIG_DVB_* with #IFDEF CONFIG_DVB_* - include linux/config.h - Let kconfig / Makefile decide to include frontend-specific code. (Properly functioning now) Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-07-15 - Now compiling also with linux-2.6.12 version.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-07-15 - linux/version.h removed at linux-2.6.13-rc3-mm1.Mauro Carvalho Chehab
- Removed remaining trailing spaces. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-07-12 * cx88-dvb.c, saa7134-dvb.c:Michael Krufky
- Always include dvb frontend code for hybrid cx88 and saa7134 boards. A previous change breaks hybrid v4l/dvb boards in 2.6.13-rc2-mm2. This fixes the bug. We will have to figure out something better in the future. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-07-04 * Makefile, saa7134-dvb.c:Michael Krufky
- Let Kconfig decide whether to include frontend-specific code in saa7134-dvb. * cx88-video.c: - added missing contrast offset value, set to 0. Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-06-28 * cx88-core.c, cx88-dvb.c, cx88-input.c:Michael Krufky
* lgdt3302.c, lgdt3302_priv.h, or51132.c: * saa7134-cards.c, saa7134-core.c: * saa7134-dvb.c, saa7134-i2c.c, saa7134-oss.c: * saa7134-tvaudio.c, saa7134-video.c: * tda8290.c, tea5767.c, tuner-simple.c: - Clean up ALL whitespace using scripts/strip-trailing-whitespaces.sh Signed-off-by: Michael Krufky <mkrufky@m1k.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 07:31:46 +0000