Age | Commit message (Collapse) | Author |
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Register v4l2_device and switch to v4l2_subdev to access the i2c modules.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@redhat.com>
changeset 4ecae6da8244 removed algo_control from i2c drivers. However,
on older kernels, a dummy function to implement algo_control is required,
otherwise, an OOPS is generated.
This patch adds a backport for all i2c drivers that defines an
i2c_algorithm, except for cafe_ccic, since OLPC hardware only works
for kernels newer than 2.6.19.
Some of the backported drivers would need also extra changes to work with
older kernels, as specified on v4l/versions.txt. Yet, I decided to add
the backport for those drivers also, since the lack of algo_control doesn't
generate any compilation error, but it is enough to break the driver. So,
better to all for all boards than to allow compiling a kernel backported that
just generates OOPS.
Priority: normal
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Brian Rogers <brian_rogers@comcast.net>
The IR controller has a couple quirks. It won't respond until some other
device on the bus is probed. To work around that, probe 0x50 first.
Then, since it won't respond to a zero-byte read, probe with a one-byte
read.
Signed-off-by: Brian Rogers <brian_rogers@comcast.net>
[mchehab.redhat.com: Fix merge conflicts and remove an unused var]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
When changing the standard the saa6752hs was not updated unless the input
was the TV tuner. The saa6752hs should be updated regardless of the input.
In addition the S_STD and G_STD ioctls for the mpeg video device didn't do
anything. This is now fixed: they behave just like S_STD and G_STD on the
video0 device.
Priority: normal
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Phase 4 removes the compatibility support for kernels < 2.6.16.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Phase 2 removes support for kernels < 2.6.10.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
First phase of the backwards compatibility cleanup: stop supporting kernels
older than 2.6.0.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
The MPEG controls could not be enumerated and so could not be read or set
through the v4l2-ctl utility or shown in control panels.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Tuner setup were happening during i2c attach callback. This means that it would
happen on two conditions:
1) if tuner module weren't load, it will happen at request_module("tuner");
2) if tuner is not compiled as a module, or it is already loaded
(for example, on setups with more than one tuner), it will happen
when saa7134 registers I2C bus.
Due to that, if tuner were loaded, tuner setup will happen _before_ reading
the proper values at tuner eeprom. Since set_addr refuses to change for a tuner
that were previously defined (except if the tuner_addr is set), this were
making eeprom tuner detection useless.
This patch removes tuner type setup from saa7134-i2c, moving it to the proper
place, after taking eeprom into account.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Dmitry Belimov <d.belimov@gmail.com>
There are two conditions, reported by saa7134 that indicates that the I2C bus
is busy: TO_SCL and TO_ARB.
On both states, it needs to wait for I2C release, before using the bus.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Douglas Schilling Landgraf <dougsland@gmail.com>
- Static memory is always initialized with 0.
- Replaced in some cases C99 comments for /* */
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
|
|
From: Andrey J. Melnikoff (TEMHOTA) <temnota@kmv.ru>
This patch updates cardlist for Beholder TV tuners:
old models (with GPIO ir) 401, 403, 405, 407, 409, 505, 507
and add support for 607, 609, M6 cards with new i2c-ir.
Signed-off-by: Igor Kuznetsov <igk72@yandex.ru>
Signed-off-by: Andrey J. Melnikov <temnota@kmv.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Currently, the only tuner-specific device that allows special
configurations is tda9887. However, tea5767 also may require some
special configurations (for example, to specify a different Xtal freq).
This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl
(TUNER_SET_CONFIG). The newer one allows specifying what tuner is
appliable to a configuration set, and allows an arbitrary configuration
struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Original description:
i2c: Remove NOP i2c_algorithm.algo_control() methods
This removes NOP implementations of i2c_algorithm.algo_control.
With this change, there are no implementations of this hook in
the kernel.org tree ... that hook seems about ripe to remove.
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This
patch removes all occurences of moduleparm.h from drivers/media files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Due to several internal API changes on kernel, kernel backward
compatibility were lost. Basically, compat.h should be the last include
for it to work properly.
This patch basically reorders kernel headers to allow backward compat to
work fine.
Also:
Some includes were added after some non-include macros, on old drivers.
Better to keep all includes at the beginning of the files.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
This change supplies a more generic version of the tuner callback.
The tuner struct now has a function pointer
int (*tuner_callback) (void *dev, int command, int arg)
additionally to a int config parameter.
both can be set through the TUNER_SET_TYPE_ADDR client call.
Note that the meaning of the parameters depend on the tuner type.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
These entries mainly are to support configurations of the tda827x
silicon tuner with a preamplifier.
The values can be set throgh the attach inform or through
the extended TUNER_SET_TYPE_ADDR client call. The function pointer
will only be updated if the parameter is not NULL.
Since a typecast is necessary to set the pointer, i added a typedef for
this pointer (tuner_gpio_func_t) in tuner.h
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
|
|
From: Thomas Genty <tomlohave@gmail.com>
This patch adds support for the remote control bundled with the
Hauppauge HVR1110
Signed-off-by: Thomas Genty <tomlohave@gmail.com>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
- Latest patch reverted, since __stringfy seems to be needed for
kernel < 2.6.15
- Applied kernel I2C cleanups from Jean Delaware.
- driver names simplified to allow usage of newer printk macros
at v4l2-common.h
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
- Now, all internal ioctls are at v4l2-common.h
- removed unused ioctl at saa6752hs.h
- all debug ioctl code moved to v4l2-common.c
- removed duplicated stuff from other cards
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
to saa7134-input.c
- saa7134-i2c's attach now detects I2C IR and calls saa7134 specific
code.
- Small bugfix at ir-kbd-i2c.
- disable_ir now unregisters i2c device.
Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Whitespace script improved.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Lots of small changes to allow compiling with kernel 2.4.
Compilation result not tested yet.
- After this patch, .version should be removed, since its
syntax has changed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- fix build for 2.6.14
* compat.h:
* ir-kbd-i2c.c: (ir_probe):
* saa7134-i2c.c:
* tvaudio.c: (chip_probe):
- removed some #if kernel version > 2.6.13 ... using compat.h instead.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
* bttv-i2c.c: (attach_inform):
* cx88-i2c.c: (attach_inform), (detach_inform):
* id.h:
* ir-kbd-i2c.c: (ir_probe):
* msp3400.c: (msp34xx_sleep), (msp_attach):
* saa6588.c:
* saa6752hs.c:
* saa7134-i2c.c: (attach_inform):
* saa7134-tvaudio.c: (tvaudio_sleep):
* tda7432.c: (tda7432_probe):
* tda9875.c: (tda9875_probe):
* tda9887.c: (tda9887_probe):
* tuner-core.c:
* tveeprom.c: (tveeprom_attach_adapter):
* tvmixer.c: (tvmixer_ioctl), (tvmixer_clients),
(tvmixer_cleanup_module):
* video-buf.c: (videobuf_dma_free):
- Step two, in preparation for 2.6.14-rcX compatability:
- Compile tested against vanila kernels 2.6.13 & 2.6.8
- 2.6.14 compile still broken...
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- New script to symlink DVB frontend code from dvb-kernel cvs tree
into patched video4linux cvs tree for testing and development
across both trees.
* scripts/unmerge-trees.sh:
- New script to be run after development, and before generating
patches or making cvs commits. This removes the symlinks to the
frontend code, and reverts the patch to the video4linux tree
created by merge-trees.sh .
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de>
|
|
- Removed remaining trailing spaces.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Fix bug in lgdt3302_read_status to return correct
FE_HAS_SIGNAL and FS_HAS_CARRIER status.
* msp3400.c, saa7134-cards.c, saa7134-i2c.c:
* tuner-simple.c, video-buf-dvb.c:
- Remove trailing whitespace.
Signed-off-by: Mac Michaels <wmichaels1@earthlink.net>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
saa7134-cards.c
|
|
* saa7134-i2c.c:
- specifying tuner type by parameter was not working. fixed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- I2C cleanups. Now, all drivers uses the same basic structure.
* cx88-video.c:
- Duplicated code commented. Should be removed soon.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
* saa7134-cards.c, saa7134-core.c, saa7134-i2c.c:
* tuner-core.c, tuner.h:
Rename v4l2_tuner field in tun_addr structure. Cleanup
tuner private calls.
|
|
* lgdt3302.c, lgdt3302_priv.h, or51132.c:
* saa7134-cards.c, saa7134-core.c:
* saa7134-dvb.c, saa7134-i2c.c, saa7134-oss.c:
* saa7134-tvaudio.c, saa7134-video.c:
* tda8290.c, tea5767.c, tuner-simple.c:
- Clean up ALL whitespace using
scripts/strip-trailing-whitespaces.sh
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Improved support for multi tuners on multi boards.
*tuner-core.c:
- Pal M and PAL N added to tuner_fixup_std
* tuner-simple.c:
- Eliminated old tea code from tuner-simple.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
|
|
- Solved a problem when compiling with some versions of gcc
- Solved a problem compiling without CONFIG_TUNER_MULTI_I2C
- cx88-i2c.c, saa7134-i2c.c:
- Make it compatible with kernel 2.6.12-rc6-mm1
|
|
- misc card-specific tweaks.
|
|
- some pinnacle 300i progress (can talk to mt352 now, not working yet
through).
- misc minor stuff.
|
|
- misc dvb updates.
- pinnacle 300i stuff (not working yet).
|
|
- move more modules to new-style insmod options.
|
|
|
|
- add i2c scans.
|
|
|
|
- tda9887: add config i2c command.
|