summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/saa7134/saa7134.h
AgeCommit message (Collapse)Author
2007-10-23 V4L: saa7134: tvaudio cleanupsMauro Carvalho Chehab
From: Maxim Levitsky <maximlevitsky@gmail.com> move some tv-audio initialization code out of tvaudio thread, and call it on resume too. Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-11-15saa7134: add support for reading Hauppauge eepromMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Increased size of dev->eedata from 128 to 256, since the Hauppauge data begins at byte 128. This has been tested on boards with smaller eeproms, and caused no problems. Added comments to distinguish between the various versions of the HVR1110. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-10-24 saa7134/: make 2 functions staticMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> saa7134_buffer_requeue() and set_tvnorm() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-13 V4L: saa7134: Fix interaction between tvaudio thread and the freezerMauro Carvalho Chehab
From: Maxim Levitsky <maximlevitsky@gmail.com> make tvaudio thread freezeable, and add proper support for that Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-12 Additional Fixes for saa7134 suspend/resumeMauro Carvalho Chehab
From: Maxim Levitsky <maximlevitsky@gmail.com> Fixes few more problems I found in my saa7134 resume code: * Race between IRQ handler and .suspend()/.resume() functions * Removes timeout timers on active buffers - those buffers will be recaptured after resume * Adds suspend/resume for IR code - probably necessary if using polling mode * Adds #ifdef CONFIG_PM overs suspend code * Runs a quirk in set_tvnorm in suspend/resume too * Rearranges the order of calls in saa7134_resume to be exactly as in saa7134_initdev thus the card is initialized in exactly the same way * Since DMA audio capture suspend/resume isn't yet supported, avoid re-enabling it on resume for now Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-08 Few clenups for saa7134 resume codeMauro Carvalho Chehab
From: Maxim Levitsky <maximlevitsky@gmail.com> *Disable DMA explictly on suspend *Enable DMA on resume, after all buffers were configured *Disable overlay on resume - apps should enable it when X is resumed ` Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-04videobuf: Remove references to old Kconfig option nameTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> CONFIG_VIDEO_BUF_DVB became CONFIG_VIDEOBUF_DVB. But in these cases, it makes more sense to use CONFIG_VIDEO_SAA7134_DVB or CONFIG_VIDEO_CX88_DVB_MODULE depending on the driver. The reference in cx23885.h should just be removed, as the code there needs to be included if DVB is on or off. I do not think you can even compile the cx23885 driver without DVB. It's clearly just leftover from when the file was obvious copied from the cx88 driver (which is not mentioned in the copyright BTW). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-09-27V4L: properly fix support for capturing interlaced video in saa7134Maxim Levitsky
By "capturing interlaced video" I mean that card ensures that top field is really top and vice versa (I think it takes the filed ID from signal) Properly turn on/off that support depending on signal state Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-09-27V4L: Add basic support for suspend/resume for saa7134Maxim Levitsky
This adds support for suspend/resume for core of saa7134 Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23Rename video-buf-dvb to videobuf-dvb to be consistent with the other patchesMauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-23Adapt drivers to use the newer videobuf modulesMauro Carvalho Chehab
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo. Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct. So, to access it, a subroutine call is needed. This patch renames all occurences of those function calls to be consistent with the video-buf split. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981 Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-08-20saa7134: add DVB-T support for Avermedia Super 007Michael Krufky
From: Edgar Simo <bobbens@gmail.com> add DVB-T support for Avermedia Super 007 Analog television is untested. The device lacks input adapters for radio, svideo & composite -- seems to be a DVB-T ONLY device. Signed-off-by: Edgar Simo <bobbens@gmail.com> Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-17Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-01saa7134-tvaudio: kthread conversionMauro Carvalho Chehab
From: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-01Reverting last changeset. There were two different patches merged togetherMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-01saa7134-tvaudio: kthread conversionMauro Carvalho Chehab
From: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-10V4l: saa7134: add support for 10moons TM300 cardMauro Carvalho Chehab
From: Tony Wan <wankai@sjtu.org> Support the 10moons TM300 TV card (so called TV Master 3), which is a 10moons saa7130 based board. Here not include features for the IR-remote. It has been tested using TVTIME. The card was auto-detected and all the input sources worked correct with sound. Signed-off-by: Tony Wan <wankai@sjtu.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01Added support for Sabrent TV-PCB05 card.Mauro Carvalho Chehab
From: James T Klaas <jklaas@appalachian.dyndns.org> Maintainer's notice: I needed to re-number the board, since the board number conflicted with a patch committed previously. Signed-off-by: James T Klaas <jklaas@appalachian.dyndns.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-05-01Add support for three cards to saa7134 driverMauro Carvalho Chehab
From: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Add support for the "Elitegroup ECS TVP3XP FM1246", the "KWorld DVB-T 210", and the Animation Technologies LR214 Rev F onwards (SAA7131) to the saa7134 driver. Also rename the LR214WF to the LR214 Rev E or ealier (SAA7135), to match what we've seen on boards in the field. Changed the comment on the Lifeview cards to indicate Rev E and earlier versus Rev F and later, together with a chip indicator, following feedback from Peter Missel <peter.missel@onlinehome.de>. Signed-off-by: Simon Farnsworth <simon.farnsworth@onelan.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-15Renamed ASUStek P7131 card [1043:4876]Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The new name fits to what it is and what is on the box. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-03-14Added / corrected support for some ASUS hybrid boardsHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> There are 2 new entries for p7131 boards and one correction for a board with LNA Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-24merge: http://linuxtv.org/hg/~hhackmann/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21Backport: make file_operations constMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Backport a kernel patch by Arjan van de Ven <arjan@linux.intel.com> that made all file_operations instances const. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21added card definition for AverMedia M102 miniPCIHartmut Hackmann
From: Markus Rechberger <mrechberger@gmail.com> Just the card definition Signed-off-by: Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-17some saa7134 cleanupsHartmut Hackmann
From: Heikki Orsila <shdl@zakalwe.fi> - use generic sort instead of bubblesort - removed useless saa7134_video_fini function - small coding style changes Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-17merge with main repositoryHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-15saa7134 2.6.20 compat patchHartmut Hackmann
From: Markus Rechberger <markus.rechberger@amd.com> saa7134 2.6.20 compat patch Signed-off-by: Markus Rechberger <markus.rechberger@amd.com> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-15updated support for tuner callbacksHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This change supplies a more generic version of the tuner callback. The tuner struct now has a function pointer int (*tuner_callback) (void *dev, int command, int arg) additionally to a int config parameter. both can be set through the TUNER_SET_TYPE_ADDR client call. Note that the meaning of the parameters depend on the tuner type. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-02-06Convert to generic boolean-valuesMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-23Added support for tda827x tuners with preamlifiersHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch contains - new tuning code for the tda827xa silicon tuner. - controls the preamplifier of some boards with this tuner. - support for the Philips Tiger S hybrid DVB-T reference design. - reworked the saa7134-dvb modulue to get rid of most of the small board specific functions. It depends on the changesets: 5119:9e5c364c59bb 5120:2c31f2803f53 and 5121:8b0ffe2a46a7 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-01-23Added a config entry and a gpio function pointer to the tuner structHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> These entries mainly are to support configurations of the tda827x silicon tuner with a preamplifier. The values can be set throgh the attach inform or through the extended TUNER_SET_TYPE_ADDR client call. The function pointer will only be updated if the parameter is not NULL. Since a typecast is necessary to set the pointer, i added a typedef for this pointer (tuner_gpio_func_t) in tuner.h Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-01-22saa713x: added a GPIO handler functionHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This function allows to set, clear and tristate the GPIO ports. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2007-01-16saa7134: add support for Terratec Cinergy HT PCIMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add support for Terratec Cinergy HT PCI Signed-off-by: Giorgio Moscardi <software@sukkology.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-27Add support for more Encore TV cardsMauro Carvalho Chehab
From: Juan Pablo Sormani <sorman@gmail.com> updated patch against latest master: Signed-off-by: Juan Pablo Sormani <sorman@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-20Saa7134: add support for the Encore ENL-TVMauro Carvalho Chehab
From: Steven Walter <stevenrwalter@gmail.com> Add a board definition for the Encore ENL-TV card, and adds its PCI subdevice to the ID table. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-12-08Add support for the ASUS P7131 remote controlHartmut Hackmann
From: Hermann Pitton <hermann-pitton@arcor.de> Besides adding the board specific code, this patch moves the RC5 decoding code from bt8xx to ir-functions.c to make it available for all drivers. Signed-off-by: Marc Fargas <telenieko.telenieko.com> Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-11-16Added support for the Terratec Cinergy HT PCMCIA moduleHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This is a hybrid cardbus module. Besides the card support, i modified the definition names for AGC and GPIO of the tda10046. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-11-05saa7134: add support for Hauppauge WinTV-HVR1110 DVB-T/HybridMichael Krufky
From: Thomas Genty <tomlohave@gmail.com> This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid Signed-off-by: Thomas Genty <tomlohave@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-10-31Add support for the Compro Videomate DVB-T200AHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This board has the same PCI ID as the T200, so the exact board type is determined from the eeprom. The original patch was provided by Francis Barber <fedora@barber-family.id.au> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-10-30added autodetected flag to the saa7134_dev structureHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> In case the exact board type needs to be determined by probing or evaluating the eeprom, this flag allows to still set the board type via the card=xx insmod option. This is an extract of a patch by Francis Barber. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-10-07Add support for AverMedia AverTV Studio 507Hartmut Hackmann
From: Mikhail Fedotov <mo_fedotov.mail.ru> This is just an additional analog board configuration. Signed-off-by: Mikhail Fedotov <mo_fedotov.mail.ru> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-10-07Add support for Pinnacle 310iHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The driver supports analog TV, radio and DVB-T. It is based on the preliminary patch by Pierluigi Rolando. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-10-03Add support for the ASUS EUROPA2 OEM boardHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This is a analog DVB-T hybrid board Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-10-03saa713x audio fixesHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This change fixes the following issues: - resolve the SECAM D/K vs SECAM-L sound conflict It is now possible to select the SECAM version either by the VIDEOIOC_S_STD IO control or by the new secam= insmod option. The driver now adapts its audio standard search list to the selected standard. - don't trigger a sound standard search when a LINE input is selected. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-09-26Support for SAA7134-based AVerTV Hybrid A16ARMauro Carvalho Chehab
From: Petr Baudis <pasky@ucw.cz> This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested only the DVB since I don't have any proper antenna available and I can receive even the DVB just barely so; I can hear noise in the FM part but I couldn't catch any station, then again I don't have an FM antenna either. The PAL/FM and IR control data are based on what I harvested on the 'net. Perhaps I or someone else will fix them if they turn out to be wrong. Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-13saa7134: add card support for Proteus Pro 2309Michael Krufky
From: Michal Majchrowicz <mmajchrowicz@gmail.com> add card support for Proteus Pro 2309, based on saa7130 bridge Signed-off-by: Michal Majchrowicz <mmajchrowicz@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-30Add support for Acorp TV134DS + FlyDVB-S cards.Andrew de Quincey
From: Igor M. Liplianin <liplianin@me.by> Add support for Acorp TV134DS and FlyDVB-S cards (both based on tda10086+tda826x) Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-15Saa7134: rename dmasound_{init, exit}Mauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> Two different exports with the same name are not a good idea: $ grep -r EXPORT_SYMBOL\(dmasound_init\) * drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init); sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init); $ This patch renames the saa7134 dmasound_{init,exit} to saa7134_dmasound_{init,exit}. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-15added support for the md8800 quadro boardHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-06-19saa7134 card (LifeView3000 NTSC)Mauro Carvalho Chehab
From: Zac Bowling <zac@zacbowling.com> Add detection for the LifeView3000 NTSC model (right now the PAL version is the only one in there, which is sort of annoying for me living in the US and all.. sigh...) This is one of those things that I like to classify "as a works for me so take it or leave it" :-) . Not that worried because its an $18 video capture card that didn't look it was selling to well in the US, but then again who knows. The documentation needs updating too I bet but its behind anyways usually to what is in the code. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Zac Bowling <zac@zacbowling.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 21:17:41 +0000