summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video/tda9887.c
AgeCommit message (Collapse)Author
2008-02-02remove PREFIX from users of tuner_foo printk macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store a pointer to the device name in the name field of struct tuner_i2c_props, so that we can remove the printk macros defined in tuner-i2c.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-21make tuner names consistent with standard casesMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Change TDA9887 to tda9887. TDA8290 shall reflect the actual hardware present in its name, ie: tda8295+18271 tda8290+8275a Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21include struct analog_demod_ops directly inside struct dvb_frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Rather than using a pointer, include struct analog_demod_ops directly inside struct dvb_frontend. This will allow us to use dvb_attach in the future, along with removing the need to check the ops structure before having to check the pointer to the method being called. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21kill tuner-driver.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-17tda9887: initialize mode to T_STANDBY at startupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Ensure that the audio is muted at attach-time Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: use printk macros from tuner-i2c.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> replace tda9887_info and tda9887_dbg printk macros with tuner_info and tuner_dbg, defined in tuner-i2c.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: remove dependency on struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: maintain private state independent of struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tuner: convert tda9887 to use TUNER_SET_CONFIGMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Use TUNER_SET_CONFIG to set configuration in tda9887's private state structure, rather than storing tda9887-specific configuration within struct tuner. Update handling of TUNER_SET_CONFIG by tuner-core, to call &t->fe.ops.analog_demod_ops rather than &t->fe.ops.tuner_ops analog_demod_ops.set_config passes the request to tuner_ops.set_config, so this does not break other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: remove references to struct tuner from printk macrosMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tuner: add struct analog_demod_info to struct analog_tuner_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store the analog demodulator name in fe.ops.analog_demod_ops.info.name Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tda8290: remove dependency on struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - remove dependency of tda8290 module on struct tuner - move tuner_foo printk macros from tuner-driver.h into tuner-core.c - clean up #includes of tuner-i2c.h / tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-08tuner: combine set_tv_freq and set_radio_freq into a single set_params methodMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We can tell whether we are tuning television or radio by testing for struct analog_parameters *params->mode == V4L2_TUNER_RADIO There is no longer any need for separate set_tv_freq and set_radio_freq functions in the analog tuner demodulator modules. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-09-14tuner: i2c_client cannot be part of the tuner structHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The bus-based I2C subsystem allocates the i2c_client struct. So if in order to be able to convert the tuner to the bus-based I2C API the embedded i2c_client struct must be removed from the tuner struct and replaced with a pointer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/tda8290.c | 22 ++++++------- linux/drivers/media/video/tda9887.c | 22 ++++++------- linux/drivers/media/video/tuner-core.c | 51 ++++++++++++++++++------------- linux/drivers/media/video/tuner-driver.h | 26 +++++++-------- 4 files changed, 65 insertions(+), 56 deletions(-)
2007-10-27tda9887: add missing module licenseMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This module was always GPL, and will remain GPL Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/tda9887.c | 2 ++ 1 file changed, 2 insertions(+)
2007-10-21make tda9887 build selectable via KconfigMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/Kconfig | 10 +++++++++ linux/drivers/media/video/Makefile | 3 +- linux/drivers/media/video/tda9887.c | 23 ++++++++++++++------- linux/drivers/media/video/tda9887.h | 33 +++++++++++++++++++++++++++++++ linux/drivers/media/video/tuner-core.c | 3 +- linux/drivers/media/video/tuner-driver.h | 4 --- 6 files changed, 62 insertions(+), 14 deletions(-)
2007-10-21tuner: convert analog tuner demod sub-modules to dvb_frontend interfaceMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Convert tda9887 and tda8290/5 to dvb_frontend interface Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/video/tda8290.c | 168 ++++++++++++++++--------------- linux/drivers/media/video/tda9887.c | 78 ++++++++------ linux/drivers/media/video/tuner-core.c | 79 +++++++------- linux/drivers/media/video/tuner-driver.h | 16 +- 4 files changed, 188 insertions(+), 153 deletions(-)
2007-10-21tuner: move analog_demod_priv into struct dvb_frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 1 linux/drivers/media/video/tda8290.c | 40 ++++++++++++------------ linux/drivers/media/video/tda9887.c | 14 ++++---- linux/drivers/media/video/tuner-core.c | 11 ------ linux/drivers/media/video/tuner-driver.h | 1 5 files changed, 29 insertions(+), 38 deletions(-)
2007-10-21tuner: move analog_tuner_ops into dvb_frontend_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org> --- linux/drivers/media/dvb/dvb-core/dvb_frontend.h | 3 linux/drivers/media/video/tda8290.c | 8 +- linux/drivers/media/video/tda9887.c | 4 - linux/drivers/media/video/tuner-core.c | 91 +++++++++++++----------- linux/drivers/media/video/tuner-driver.h | 4 - 5 files changed, 63 insertions(+), 47 deletions(-)
2007-08-21tuner: kill i2c_client interface to tuner sub-driversMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> To ease the conversion of the analog tuner sub-drivers into dvb_frontend style tuner modules, we must remove the i2c_client interface. dvb_frontend style tuner modules use i2c_transfer directly on the i2c_adapter. This change only alters the interface between tuner.ko and the tuner sub-drivers. The v4l2 / i2c_client interface to tuner.ko remains intact. This patch adds inline functions tuner_i2c_xfer_send, and tuner_i2c_xfer_recv, to replace i2c_master_send and i2c_master_recv inside the tuner sub-drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Mike Isely <isely@pobox.com> Acked-by: Steven Toth <stoth@hauppauge.com> Acked-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Jarod Wilson <jwilson@redhat.com> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-21Cleanup: remove linux/moduleparam.h from drivers/media filesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This patch removes all occurences of moduleparm.h from drivers/media files. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-21tuner: fix header file includes orderMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> kernel headers go above subsystem headers Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-08-03tuner: Better tuner radio supportTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-06-26tuner: remove hardware-specific info from public headerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move internal structures and debug macros to drivers/media/video/tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-06-06tda9887: store tuning operations in tuner_operations structureMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Create static struct tuner_operations tda9887_tuner_ops for tda9887 tuning function callback pointers Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-06-06tuner: create struct tuner_operationsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Move tuner callback function pointers out of struct tuner, into struct tuner_operations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-06-04tuner: define release callback for mt20xx, tda9887 and tda8290Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Define tuner release callbacks for mt20xx, tda9887 and tda8290, so that these drivers can release their own private structures themselves. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-05-29tuner: Move device-specific private data out of tuner structMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Create private data struct for device specific private data. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-12-04Usbvision radio requires GainNormal at e registerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Adds an option to select GainNormal at tda9887 and make usbvision to use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-24tda9887: add configuration setting for L standard PLL gatingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add a tuner config parameter for TDA9887, default_pll_gating_18, that changes the L standard PLL gating value from 36% to 0% (datasheet says 0%, tda9887 code says 18%). Turn this on for Microtune 4049FM5, as recomended by tuner datasheet. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-06-28merge: http://linuxtv.org/hg/~hverkuil/tda9887Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-25tda9887 default TOP value is 0x10Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> For most tuners the default TOP value is 0x10, regardless of TV norm. So revert earlier change that sets the TOP value to 0x14 for PAL/SECAM. This is incorrect. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-25Add tda9887-specific tuner configurationHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Many tda9887 settings depend on the chosen tuner. Expand the tuner parameters to include these tda9887 settings. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-25Remove duplicate 'tda9887' in info messages.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Remove the duplicate '(tda9887)' in these messages: tda9887 8-0043 (tda9887): tda988[5/6/7] found @ 0x43 (tuner) The same string is already printed as the prefix in this line. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-23Merge tda9887 module into tuner.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Most uses a tda988[5/6/7] IF demodulator as part of the device. Having this as a separate stuff makes harder to configure it, since there are some tda9887 options that are tuner-dependent and should be bound into tuner-types structures. This patch merges tda9887 module into tuner. More work is required to make tuner-types to properly use it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-02-03Add missing NTSC_M_KR module ntsc parameter value for tda9887.Hans Verkuil
From: Hans Verkuil Signed-off-by: Hans Verkuil
2006-02-03Add V4L2_STD_NTSC_M_KR TV standard for South Korean NTSC-M using A2 audio.Hans Verkuil
From: Hans Verkuil South Korea uses NTSC-M but with A2 audio instead of BTSC. Several audio chips need this information in order to set the correct audio processing registers. Acked-by: Mauro Carvalho Chehab <mauro_chehab@yahoo.com.br> Signed-off-by: Hans Verkuil
2006-01-21Cause tda9887 to use I2C_DRIVERID_TDA9887Mike Isely
The tda9887 has an I2C id reserved for it, but it hasn't been using it. Probably an oversight. Fixed with this patch. From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-01-11From: Panagiotis Issaris <takis@issaris.org>Mauro Carvalho Chehab
Conversions from kmalloc+memset to k(z|c)alloc Conversions from kmalloc+memset to k(z|c)alloc. kernel-sync Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-08i2c fixes and cleanupsMauro Carvalho Chehab
- Miscelaneous i2c cleanups and fixes to work with kernel >2.6.15 - linux/sound/pci/bt87x.c updated to kernel version. kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-07Some cleanups at I2C modulesMauro Carvalho Chehab
- Latest patch reverted, since __stringfy seems to be needed for kernel < 2.6.15 - Applied kernel I2C cleanups from Jean Delaware. - driver names simplified to allow usage of newer printk macros at v4l2-common.h Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-01ioctls cleanups.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br> - Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-25replace <media/i2c-compat.h> with "i2c-compat.h"Michael Krufky
-#include <media/i2c-compat.h> +#include "i2c-compat.h" Signed-off-by: Michael Krufky <mkrufky@m1k.net>
2005-12-07#elifs replaced since gentree.pl script is not able to handle elifs.Mauro Carvalho Chehab
kernel-sync Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-12-05tda9887 improvements: better defaults, better configurability.Hans Verkuil
- Set the tuner takeover point to 0x10 for NTSC/radio and 0x14 for PAL/SECAM. - Allow override through TDA9887_SET_CONFIG - PAL-N belongs with PAL-BG as does PAL-H. PAL-Nc belongs to PAL-M - Add SECAM-BGH - Set video freq to cVideoIF_38_90 for DK standards. - Add cTunerGainLow to radio, change deemphasis to 75 for mono. - Add ntsc module param for 'M' and 'J' (Japanese) standards. - Fix module handling for 2.4. - Now able to select all standards through pal/secam/ntsc module options Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-12-04Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support.Hans Verkuil
Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-12-02Add VIDIOC_LOG_STATUS to tuner-core.cHans Verkuil
Mark tda9887.c status log values as hexadecimal (add 0x prefix). Add VIDIOC_LOG_STATUS support to tuner-core.c. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-11-27Fix suspend/resume 2.6.15 compile warningsHans Verkuil
Fix suspend/resume 2.6.15 compile warnings. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2005-11-16Added Secam L' std on tda9887 and common macros moved to videodev2.hMauro Carvalho Chehab
- Added SECAM L' video standard - Common std macros moved to videodev2.h Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2005-11-06 - #elsif removed, since it breaks gentree stuff.Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 21:35:40 +0000