summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2006-08-06dvb-pll support for MT352/ZL10353 based tuners.Chris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Typical wiring of MT352 and ZL10353 based tuners differs from dvb-pll's expectation that the PLL is directly accessible. On these boards, the PLL is actually hidden behind the demodulator, and as such can only be accessed via the demodulator's interface. It was failing to communicate with the PLL during an attach test and subsequently not connecting the tuner ops. By passing a NULL I2C bus handle to dvb_pll_attach, this accessibility check can be bypassed. Do this for the affected boards. Also fix a possible NULL dereference at sleep time, which would otherwise be exposed by this change. Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2006-08-03Quickcam_messenger compilation fixMauro Carvalho Chehab
From: Diego Calleja <diegocg@gmail.com> In bugzilla #6943, Maxim Britov reported: "I can enable Logitech quickcam support in .config, but it want be compile. I have to add into drivers/media/video/Makefile: obj-$(CONFIG_USB_QUICKCAM_MESSENGER) += usbvideo/" He's right, just enable that driver as module while disabling every other driver that gets into that directory, nothing will get compiled. This patch fixes the Makefile. Signed-off-by: Diego Calleja <diegocg@gmail.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-03Fix V4L1 Compat for VIDIOCGPICT ioctlMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-03From: Mauro Carvalho Chehab <mchehab@infradead.org>Mauro Carvalho Chehab
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-02Add missing dvb-pll Kconfig infrastructure.+ CTL_SMC_PHY,Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Add missing dvb-pll Kconfig infrastructure. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-08-02merge: from mchehabMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-02Improved comment for AR device and fix some typosMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-02V4L2 Conversion: saa5246a, saa5249, vino, hexium_orion, hexium_geminiMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Just a few adjustments were required on those drivers to be V4L2 compliant. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-02Fix a typo on the previous patchMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-02Konicawc - handle errors from input_register_device()Mauro Carvalho Chehab
From: Dmitry Torokhov <dtor@insightbb.com> Compile-tested only (no hardware) Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-01Fix minor errors in build filesTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> In pwc Kconfig, change 'depends' to 'depends on' In dvb-core Makefile, change '=' to ':=' Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-08-01Turn on the Low Noise Amplifier of the Samsung tuners.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Without the LNA these tuners perform very poorly (read 'unwatchable') when the signal is weak. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-01Fix broken msp3400 module option 'standard'Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to a wrong statement order the 'standard' module option didn't work for 'G' model chips. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-01Add support for PAL-Nc in cx24850.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-08-01cx25840_read4 has wrong endianness.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> cx25840_read4 assembled the bytes in the wrong order. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-07-31Fix V4L1 dependencies on compat_ioctl32Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Compat32 should be able to handle V4L1 ioctls if the old API support were selected. kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-31Driver dsbr100 is a radio device, not a video one!Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-30Fix a typo that caused some compat stuff to not workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Config option typo: -#ifdef CONFIG_V4L1_COMPAT +#ifdef CONFIG_VIDEO_V4L1_COMPAT Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-30Add support for Acorp TV134DS + FlyDVB-S cards.Andrew de Quincey
From: Igor M. Liplianin <liplianin@me.by> Add support for Acorp TV134DS and FlyDVB-S cards (both based on tda10086+tda826x) Signed-off-by: Igor M. Liplianin <liplianin@me.by> Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-07-29Restore compat_ioctl in pwc driverMauro Carvalho Chehab
From: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> The compat_ioctl support of the pwc driver was dropped during the last update of the driver. I suppose it was by mistake. If yes here is the patch to restore the support. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@looxix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29merge: http://linuxtv.org/hg/~quincy/v4l-dvb-attachMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-28Refactor dvb_detach calls into a single dvb_frontend_detach function.Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Remove buggy dvb_detach() macro and replace with unified dvb_frontend_detach() call. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Remove frontend selection from cx88/saa7134 driversAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Replaced with dvb_attach() Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Add Kconfig infrastructure for dvb_attachAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Allow it to be en/disabled Disable it in < 2.6.17 due to symbol_xxx() bug Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-28Convert DVB devices to use dvb_attach()Andrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> Only devices using > 1 frontend were ported; ones which did not are left using static binding. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Acked-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-27Force horizontal resolution limits in the pvrusb2 driverMike Isely
From: Mike Isely <isely@pobox.com> This change causes the pvrusb2 driver to limit horizontal resolution to be only 720 if 24xxx device hardware is being used. This is a workaround for an unsolved problem in the driver where if the resolution is set to something other than 720 the video quality will be _seriously_ degraded. It only happens on 24xxx devices (29xxx are unaffected by the problem and unaffected by this change). Once the problem is finally solved, this small change can be removed. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-27Make it possible for run-time calculation of control min/max in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The internal control implementation in the pvrusb2 driver normally encodes integer range limits using literal values in a const structure. This change adds two function pointers, which if not null will be called through in order to determine integer min / max values. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-26Eliminate hardcoded limits in VIDIOC_[S|TRY]_FMT for pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 implementation for VIDIOC_[S|TRY]_FMT was hardcoding limits on the range for allowed resolution, but it would be much better if we instead just queried the internal control for these values. This then opens the door for the driver to adjust these limits based on the detected hardware. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-26Merge from masterMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-26bttv: Revert VBI_OFFSET to previous value, it works betterTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> A previous patch changed VBI_OFFSET to match what the datasheets say it should be. However, the bt8x8 datasheets are wrong. The old value of 244 is closer to what is actually observed. The real value appears to not be constant and is different for different chip revisions. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Alan Cox <alan@redhat.com>
2006-07-25videodev: Check return value of class_device_register() correctlyTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Errors are return values < 0, not != 0. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25bttv: clean up some pre-2.6.0 class device compat stuffTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add bit of compat code for class_device_create_file() to compat.h for pre-2.6.0 kernels. This allows an #ifdef to be removed from bttv-driver.c, and helps other code which never had one. Changed the code to turn on for pre-2.6.0, rather than pre-2.5.0, as the class device stuff was added in 2.5.69. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25bttv: use class_device_create_file and handle errorsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Revert bttv-driver.c from video_device_create_file() to use class_device_create_file() again. video_device_create_file() is only available when V4L1 is on. Proper error checking is added for failure of class_device_create_file(). Will print error message and unroll partially created sysfs entries. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25videodev: Handle class_device related errorsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add proper error checking and roll-back for failure of class_device_create_file() in videodev.c. Print error messages and unroll partially created sysfs entries. Also, failure of class_device_register() in video_register_device() is handled correctly. It was failing to de-allocate the minor number. This must be done in video_register_device(), since the caller has no way of knowing if failure occurred before or after the class device was registered. Also added an error message if video_register_device() is called with an unknown type, which should never happen. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25Remove of couple of useless linesTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> A buffer was set just before an if block, and then again in both branches of the if. Obvious coding error. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-24OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-24cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card supportMichael Krufky
From: David Bussenschutt <buzz@oska.com> Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: David Bussenschutt <buzz@oska.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add support for Norwood PCI TV Tuner (non-pro)Michael Krufky
From: Peter Naulls <peter@chocky.org> This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add autodetection support for AverMedia M150-DMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add initial support for Hauppauge HVR3000 trimode cardMichael Krufky
From: Eric Thomas <ethomas@claranet.fr> add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: Eric Thomas <ethomas@claranet.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-23merge: masterMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-23Fix broken dependencies on media Kconfig Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-23Fix for compilation without V4L1 or V4L1_COMPATMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Removed usage of HAVE_V4L1 Including videodev.h will just include videodev2.h if V4L1 is not supported V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-22Correctly handle sysfs error leg file removal in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Take note of which sysfs files / groups that the pvrusb2 successfully creates and only delete those specific items when tearing things down. (Previously we just blindly tore everything down every time.) Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-22Clean up some post mpeg-controls issues in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Fix a few miscellaneous issues in the pvrusb2 driver related to use of the new mpeg controls. This also should fix problems involving update of the saa7115 / cx25840 configuration as control changes are made. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-21VIDIOCSMICROCODE were missing on compat_ioctl32Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> video_code size is 24 on i386 and 32 on x86_64, so a proper handling is needed on compat_ioctl32 to fix it. This code should be tested, since just *a few* boards use this ioctl. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Removed the remaining config.h stuffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Several other backports from kernel to v4l/dvb treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 12:05:38 +0000