summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2008-01-05Add code for autoloading em28xx-alsa, if neededMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Older em28xx devices does implement standard Audio Class. However, on newer devices, this were replaced by a Vendor Class. This patch autodetects that an em28xx lacks Audio Class and auto-loads em28xx-alsa, for the devices that implements only a Vendor Class. For devices with Audio Class, snd-usb-audio module will provide an ALSA interface. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Integrates em28xx-audio.c into em28xx kernel moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Also fixes the remaining CodingStyle issues that Lindent didn't fix. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Lindent em28xx-audio.cMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Adds em28xx-audio moduleMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> em28xx-audio module exports em28xx Vendor Class audio as an -alsa driver. This module were written based on usbaudio driver by Markus Rechberger. Recently, he acked to allow us to merge it on kernel: http://lists-archives.org/video4linux/20408-supporting-prolink-pixelview-405-dvd-maker.html Thanks to Markus Rechberger <mrechberger@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05HVR950 requires additional settings for audio to properly workMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those commands. Also, MTS firmware is required for audio to work on HVR950. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-05Improve audio setup handlingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> It is possible to select audio inputs via em28xx or via ac97 functions. This patch allows configuring a board to use either one way. It also do some cleanups at audio setup configurations. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-02tda18271: store IF frequency in a u16 instead of u32Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store IF Frequency in a u16 instead of a u32. Multiply by 1000 before use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-02tda18271: allow device-specific configuration of IF frequency and std bitsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Allow drivers to pass device-specific configuration parameters during attach. If these parameters are omitted, default values will be used. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01tda18271: add support for NXP TDA18271HD/C2Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Tested successfully with QAM256 digital cable. Analog television is limping, needs more work. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2008-01-01Fix in-kernel ivtv compilationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Due to tuner-xc2028.h, some extra directories should be added at .h search. CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-28merge: http://linuxtv.org/hg/~mkrufky/cx23885Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://linuxtv.org/hg/~mkrufky/fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Fix a few issues at the bttv conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> bttv driver is working as previously. An additional gain of about 1,5Kb were obtained with the driver conversion to vidioc_ioctl2: text data bss dec hex filename 89208 40244 57556 187008 2da80 old/bttv.ko 88960 38740 57556 185256 2d3a8 new/bttv.ko (measured on a x86_64) Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Preserve the previous order to make easier to check the conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27Replace vidioc_ to bttv_Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since there are a few vidioc_ functions that were exported, rename those functions to bttv_ in order to avoid poluting namespace. The other functions were also renamed, to standardize inside the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1500Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27Converted bttv to use video_ioctl2Mauro Carvalho Chehab
From: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-27cx23885: add missing subsystem IDs for Hauppauge HVR1500 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1250Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: update model matrix for Hauppauge HVR1800Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-27cx23885: add missing subsystem ID for Hauppauge HVR1800 RetailMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24tuner: fix backwards logic in check for set_configMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner-core was checking if analog_ops->set_config is set. If set, it would complain that it isn't. Fix this backwards logic to the proper behavior. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-26Kconfig: VIDEO_CX23885 must select DVB_TUNER_XC5000 if !DVB_FE_CUSTOMIZEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Everybody forgets to add the Kconfig stuff after they add new card support :-/ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24ivtv: small textual updateHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-24ivtv: udelay has to be changed *after* the eeprom was read, not beforeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The eeprom decides which Hauppauge model it is, so the decision whether to use an udelay of 5 or 10 needs to be taken after reading the eeprom, not before. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-24cx23885: fix bad use count caused by tda18271 being probed by tda8290Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Don't allow the tda8290 module to probe and attach the tuner module, causing incorrect use counts when using dvb_attach. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-24tda8290: add the option not to probe for tuners passed into tda829x_configMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Prevent the tda8290 module from probing for tuners during tda829x_attach, by passing: .probe_tuner = TDA829X_DONT_PROBE, ...in struct tda829x_config Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-23merge: http://linuxtv.org/hg/~mkrufky/ezqamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-22ivtv: drop an incorrect commentHans Verkuil
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-22Kconfig: VIDEO_CX23885 selects TUNER_TDA8290 and DVB_TDA18271Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-22Kconfig: VIDEO_CX23885 must select TUNER_XC2028 if !DVB_FE_CUSTOMIZEMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-22ivtv: add XC2028 support for Club3D cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-21tuner-xc2028: fix xc2028_attach functionMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> xc2028_attach was returning an integer when disabled from the build, where it should instead be returning NULL. Declare xc2028_attach as type dvb_frontend * instead of void *. The prototype declaration must be marked as extern in the header. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21merge: http://linuxtv.org/hg/~stoth/xc5000Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-21merge: http://linuxtv.org/hg/~mkrufky/tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-21merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-21include struct analog_demod_ops directly inside struct dvb_frontendMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Rather than using a pointer, include struct analog_demod_ops directly inside struct dvb_frontend. This will allow us to use dvb_attach in the future, along with removing the need to check the ops structure before having to check the pointer to the method being called. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21ivtv: mspx4xx needs a longer i2c udelayHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-21kill tuner-driver.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-21move struct analog_tuner_ops into dvb_frontend.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> struct analog_tuner_ops no longer has any dependencies specific to v4l2, so we can move this into dvb_frontend.h with the rest of the tuning structures. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-20tuner: remove extraneous variable declarationMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> tuner_count is already declared as "extern unsigned const int" in <media/tuner-types.h> -- Remove it from tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-20merge: http://linuxtv.org/hg/~mkrufky/stableMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-19Add Hauppauge tuner type 150 defintionSteven Toth
From: Steven Toth <stoth@hauppauge.com> Add Hauppauge tuner type 150 defintion. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-19Avoid 'unknown model' message for the HVR1500-QSteven Toth
From: Steven Toth <stoth@hauppauge.com> Avoid 'unknown model' message for the HVR1500-Q Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-19xc5000: Cleanups of types, result codes etc.Steven Toth
From: Steven Toth <stoth@hauppauge.com> This translates much of the xceive coding style, adds some result codes and generally cleans up whitespace and function arguments. Signed-off-by: Steven Toth <stoth@hauppauge.com>
2007-12-19Kconfig: VIDEO_CX23885 must select DVB_LGDT330XMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-18cs5345: new i2c driver.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-18 tuner-xc2028: ATSC requires 1.75 MHz tuning offsetMauro Carvalho Chehab
From: Michael Krufky <mkrufky@infradead.org> In my testing yesterday, I was using a scan file tailored specifically for a unique test situation -- As it turns out, this scan file was bad, and I will use the one included inside dvb-apps for testing for now on. I've tested with other ATSC tuners just to confirm, using: us-ATSC-center-frequencies-8VSB Anyhow, as it turns out, the tuner-xc2028 *does* require a tuning offset for ATSC. Even though the linux-dvb api passes in center frequencies from userspace, apparantly the xceive firmware is already factoring in the tuning offset to center. In order to make the device function using the same scan files / channels.conf configurations as other atsc devices, we must offset by 1.75 MHz. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-26 15:57:40 +0000