summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-05-13gspca - spca508: Cleanup source and update copyright.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-05-18merge: http://kernellabs.com/hg/~dheitmueller/em28xx-isoc-fixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-18merge: http://kernellabs.com/hg/~dheitmueller/au0828-oldkernel-compilefixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-16em28xx: properly set packet size based on the device's eeprom configuration.Devin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> The em28xx actually has a register that tells the driver what the maximum packet size is (based on a value programmed into the eeprom). Make use of that register instead of assuming a hardcoded value of 564 (since 564 is not correct for devices that do QAM such as the KWorld 340u). Note that for now the em2874 code isn't there, falling back to the 564 value, however this is not a problem since there are not any em2874 based devices in the current v4l-dvb tree). Thanks to Jarod Wilson for detecting the initial problem and figuring out that the isoc configuration was wrong for his device. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Jarod Wilson <jarod@wilsonet.com>
2009-05-14au0828: get rid of debug printk that was causing compile failuresDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Remove a debug printk() line I added which is no longer needed, and happened to be causing compile failures on some earlier kernels in Han's daily compile report. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-05-14cx88: remove xc5000 reset for Pinnacle 800iDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: Chaogui Zhang <czhang1974@gmail.com>
2009-05-11change kmalloc to vmalloc for sglist allocation in videobuf_dma_map/unmapMauro Carvalho Chehab
From: Cohen David.A <david.cohen@nokia.com> Change kmalloc()/kfree() to vmalloc()/vfree() for sglist allocation during videobuf_dma_map() and videobuf_dma_unmap() High resolution sensors might require too many contiguous pages to be allocated for sglist by kmalloc() during videobuf_dma_map() (i.e. 256Kib for 8MP sensor). In such situations, kmalloc() could face some problem to find the required free memory. vmalloc() is a safer solution instead, as the allocated memory does not need to be contiguous. Signed-off-by: David Cohen <david.cohen@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-25merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-24Add support for Terratec Grabster AV350Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-23em28xx: add Terratec GrabbyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-19uvcvideo: Add Lenovo Thinkpad SL400 to device list commentsLaurent Pinchart
From: Filipe Rosset <rosset.filipe@gmail.com> Update the 17ef:480b device comment to list Lenovo Thinkpad SL400. Priority: low Signed-off-by: Filipe Rosset <rosset.filipe@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-05-19uvcvideo: Start status polling on device openLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Most UVC camera include an interrupt endpoint to report control value changes, video streaming errors and camera button events. The USB controller continuously polls the interrupt endpoint to retrieve such events. This prevents the device from being auto-suspended, and thus consumes power. Reporting video streaming errors don't make sense when the V4L2 device is closed. Control value changes are probably useless as well if nobody listens to the events, although caching will probably have to be completely disabled then. No polling is thus be required when /dev/videoX is not opened. To enable auto-suspend and save power do not poll the interrupt endpoint until the device is open. We lose the ability to detect button events if no application is using the camera. http://bugzilla.kernel.org/show_bug.cgi?id=11948 Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-05-14merge: http://linuxtv.org/hg/~mkrufky/k2c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-12cx23885: clean up struct names for Hauppauge WinTV-HVR127X devicesMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-12cx23885: update model matrix for "k2c2" retail boardsMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-12cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-112: handle unregister for non-I2C buildsMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Build fails when CONFIG_I2C=n, so handle that case in the if block: drivers/built-in.o: In function `v4l2_device_unregister': (.text+0x157821): undefined reference to `i2c_unregister_device' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~mcisely/pvrusb2-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11soc_camera: depends on I2CGuennadi Liakhovetski
From: Randy Dunlap <randy.dunlap@oracle.com> soc_camera uses i2c_*() functions and has build errors when CONFIG_I2C=n: ERROR: "i2c_new_device" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_get_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_put_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_unregister_device" [drivers/media/video/soc_camera.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-05-10cx18: Initial attempt to get sliced VBI working for 625 line systemsAndy Walls
From: Andy Walls <awalls@radix.net> Initial changes to get sliced VBI for 625 line system working. This is patch is untested. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-09pvrusb2: Allocate a routing ID for future support of Terratec Grabster AV400Mike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-09soc-camera: Fix section mismatch warningGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> modpost needs a __refdata marker in driver structs to ensure references to .probe and .remove functions from .devinit.text and .devexit.text sections respectively are valid. Add __refdata to soc_camera_pdrv platform driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-05-09merge: http://linuxtv.org/hg/~jfrancois/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09merge: http://linuxtv.org/hg/~awalls/cx18-av-coreMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-09merge: http://www.linuxtv.org/hg/~stoth/tda10048Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-08tveeprom: Point the TCL MNM05-4 tuner entry to an actual tuner definitionAndy Walls
From: Andy Walls <awalls@radix.net> The TCL MNM05-04 is used on some HVR-1600 models. It appears to be similar to the TCL MFMN05-4 but without FM radio. The TUNER_PHILIPS_FM1236_MK3 tuner definition appears to be the proper existing tuner definition to use for this tuner. Reported-by: Matt Beadon <matt.beadon@gmail.com> Priority: normal Tested-by: Matt Beadon <matt.beadon@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-08cx18: Add missing newline to tuner detection error messageAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-08cx23885: override set_frontend to allow rf input path switching on the HVR1275Mauro Carvalho Chehab
From: Michael Krufky <mkrufky@kernellabs.com> Use separate RF input spigots for Antennae and Cable. Priority: normal Reviewed-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30merge: http://kernellabs.com/hg/~mkrufky/au0828Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30merge: http://www.kernellabs.com/hg/~dheitmueller/em28xx-terratec-zl10353/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-miscMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30move V4L2_PIX_FMT_SGRBG8 to the proper placeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of defining a new pif format on an internal header, move it to the V4L2 API header. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30pwc: remove definitions that are already present at videodev2.hMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30Remove a bogus codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-30em28xx: add other video formatsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Add suppport for the teste RGB565 format (16 bits/pixel). Currently, webcam support works only at RGB565, at 640x480. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-29em28xx: add support for Silvercrest WebcamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> This webcam uses a em2710 chipset, that identifies itself as em2820, plus a mt9v011 sensor, and a DY-301P lens. It needs a few different initializations than a normal em28xx device. Thanks to Hans de Goede <hdegoede@redhat.com> and Douglas Landgraf <dougsland@redhat.com> for providing the acces for the webcam during this weekend, I could make a patch for it while returning back from FISL/Fudcom LATAM 2009. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-29mt9v011: CodingStyle fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-29mt9v011: Some fixes at the register initialization tableMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-29Add a driver for mt9v011 sensorMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Adds driver for mt9v011 based on its datasheet, available at: http://download.micron.com/pdf/datasheets/imaging/MT9V011.pdf The driver was tested with a webcam that will be added on a next patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-26au0828: fix i2c for kernels prior to 2.6.26Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-06-26em28xx: enable new-style i2c API for kernels >= 2.6.26, not 2.6.22.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-06-26v4l2-common: fix uninitialized variableHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Fix compiler warning for uninitialized variable when compiling for pre 2.6.26 kernels. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-06-25vivi: bug: don't assume that S_STD will be called before streamingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> precalculate_bars() improved vivi performance. However, it assumed that always before streaming, the driver would call VIDIOC_S_STD. This is not an API requirement, and the testing apps don't do that. Due to that, a regression were caused by the patch that added it. This patch moves the precalculate_bars to the proper place of the code, calling it at buffer_prepare() callback. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-24soc-camera: fix missing clean up on error pathGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> If soc_camera_init_user_formats() fails in soc_camera_probe(), we have to call client's .remove() method to unregister the video device. Reported-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Priority: high --- drivers/media/video/soc_camera.c | 10 +++++++--- 1 files changed, 7 insertions(+), 3 deletions(-)
2009-06-24soc_camera: Fix debug output of supported formats countGuennadi Liakhovetski
From: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> The supported formats count must be set to 0 after debug output right before the second pass. Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Priority: high --- drivers/media/video/soc_camera.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-06-22em28xx: Fix tuning for Terratec Cinergy T XS USB (zl10353 version)Devin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Fix the code so that the zl10353 version of the Terratec Cinergy T XS USB starts working again. This includes fixing what must have been a typo in the GPIO definition for the digital side of the board, and setting of the disable_i2c_gate_ctrl property for the zl10353 config, so that the i2c bus doesn't get wedged the first time something tries to close the gate. Also, add a printk() making clear that the mt352 version still isn't supported. This issue is still being actively debugged, but in the meantime at least the dmesg output will show a very clear error... Thanks to Jelle de Jong for providing sample hardware to test with. Thanks to Simon Kenyon for testing various patches and providing SSH access to his environment so I could debug with access to a valid signal source. Priority: high Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Jelle de Jong <jelledejong@powercraft.nl> Cc: Simon Kenyon <simon@koala.ie>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-12 09:02:55 +0000