summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2007-12-10merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10CodingStyle fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Miscelaneous cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Manually fixed all pertinent checkpatch.pl errors inside the source code. Also removed some unused code at the driver and a few minor cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Avoid troubles when using multiple devicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> mv_count is a counter used to move the vertical bars. Before this patch, it where a static var. This works fine for just one device. However, when using multiple devices, every device would increment it. This patch moves it to its correct place: struct vivi_dev. So, now, each device has its own data. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Allow vivi to open multiple video devicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Now, it is possible to open multiple vivi devices, by using n_devs parameter. This makes vivi driver closer to a real one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Fix vivi to support non-zero minor nodeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There were a trouble at vivi driver when using non-zero inodes. This where due to not properly preserving the minor inode after calling video_register. Since this driver is a reference for newer drivers, and it is possible to have more than one video device inside the machine, this patch makes vivi to dynamically allocate video_device struct. Thanks to Gregor Jasny <jasny@vidsoft.de> for pointing the issue. Also, this patch removes a very anoying (but useless) message of not having a proper release call. CC: Gregor Jasny <jasny@vidsoft.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: remove i2c legacy support from drivers that no longer need itHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-07 v4l-nopage-fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> dont just copy-and-paste stuff. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: convert to bus-based i2c API.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: select VIDEO_IR in KconfigHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: add AVerMedia EZMaker PCI Deluxe supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: update version number to 1.2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-07Subject: v4l: nopageMauro Carvalho Chehab
From: Nick Piggin <npiggin@suse.de> Convert v4l from nopage to fault. Remove redundant vma range checks. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Fix some errors at the video_ioctl2 conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Reorder functions to make easier to compare with the previous codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> After this patch, the order of the functions will be the same as before the patch converting the driver to user video_ioctl2. This makes easier to diff between the previous version and the newer one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Converted saa7134-video to use video_ioctl2Mauro Carvalho Chehab
From: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07saa7134-dvb: fix tuning for WinTV HVR-1110Michael Krufky
From: Benoit Istin <beistin@gmail.com> There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-03merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb-yuvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-03merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-02pvrusb2: Recognize ATSC video standard bit valuesMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: minor rework for default video standard handlingMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: When a per-device-type default video standard is declared, handle it in such a way that it can be correctly and unambiguously reported in the system log. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Expand comment in device attributes description.Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Remove use of volatile in pipeline control state machineMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: Eliminate use of volatile in pipeline control state variables. These were all cases of paranoia; upon further review the overall mechanism employed here should not require use of volatile. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Remove use of volatile in command sequencerMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: Remove use of volatile for command sequencer; these variables are set by interrupt-context code and we check their state in such a manner that there should be no race conditions. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Implement default standard selection based on device typeMike Isely
From: Mike Isely <isely@pobox.com> This adds a default video standard setting to the pvr2_device_desc structure for describing device types. With this change it is possible to set a reasonable default standard based on device type. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Change division to bit-or for tveeprom standardsMike Isely
From: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02 ivtv: Remove a invalid shadow-variableMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-02xc2028: select DTV78 firmware if tuning 7MHz VHF / 8MHz UHFChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> It seems that the DTV78 firmware is intended for use in locations where VHF channels have 7MHz bandwidth and UHF channels have 8MHz bandwidth. If we switch to DTV78 firmware when we detect this condition, we can avoid firmware reloads when switching between VHF and UHF transponders. Place the state for this in the control structure so that card drivers can hint to us to use DTV78 firmware from the first tuning attempt. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-02xc2028: be more specific about when applying offset for 7MHz channelsChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> We have been inserting a mystery 500kHz offset for tuning 7MHz channels, however some experimentation reveals it is only needed under certain conditions with specific firmware combinations. Document these and only apply the offset when we know it is required. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-02cx25840: fix endianness inconsistencyHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> cx25840_read4 reads a little-endian 32-bit value whereas cx25840_write4 writes the 32-bit value as big-endian. Convert write4 to use little-endian as well (that's the correct endianness). Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-02ivtv: fix incorrect debug message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-02xc2028: check HAS_IF flag against tableChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> When searching for the right S-Code table to load, check the HAS_IF flag against the firmware we are checking instead of against the the "type" requested. We already ignore the scode type requested if the caller passed an int_freq; this makes the search by frequency consistent with that behaviour. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-02xc2028: s-code offset should not modify internal control structureChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Don't modify the control structure that was provided at attach when applying an offset to the S-Code, otherwise it will be incorrect on subsequent tunes. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-02xc2028: include int_freq in firmware version displayChris Pascoe
From: Chris Pascoe <c.pascoe@itee.uq.edu.au> Add "int_freq" to the debugging output when selecting firmware and the HAS_IF flag when dumping firmware during load. Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
2007-12-17V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100Mauro Carvalho Chehab
From: Aurelien Jarno <aurelien@aurel32.net> The patch below adds the "Pinnacle Dazzle DVC 100" to the list of cards supported by the em28xx driver. As the configuration is the same as the DVC 90 one, it simply adds a new USB ID to the list of devices supported by the DVC 90 configuration. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17bttv: check pci_register_driver() errorMauro Carvalho Chehab
From: Akinobu Mita <akinobu.mita@gmail.com> Check pci_register_driver() error in module_init. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17merge: http://linuxtv.org/hg/~mkrufky/tunerMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17Convert cx88_input.audioroute to a bitfieldMauro Carvalho Chehab
From: Michael Krufky <mkrufky@linuxtv.org> Prevent us from wasting some extra bytes of memory Thanks to Trent Piepho, for pointing this out. Cc: Trent Piepho <xyzzy@speakeasy.org> Cc: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17Fix CodingStyle troubles caused by the previous cx88 commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17merge: http://linuxtv.org/hg/~rmcc/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-17tda9887: initialize mode to T_STANDBY at startupMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Ensure that the audio is muted at attach-time Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tuner: remove unneeded #includes from tuner-driver.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tuner: remove struct tuner from tuner-driver.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> struct tuner holds state for tuner-core, only -- move it into tuner-core.c Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: use printk macros from tuner-i2c.hMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> replace tda9887_info and tda9887_dbg printk macros with tuner_info and tuner_dbg, defined in tuner-i2c.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: remove dependency on struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tda9887: maintain private state independent of struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tuner: convert tda9887 to use TUNER_SET_CONFIGMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Use TUNER_SET_CONFIG to set configuration in tda9887's private state structure, rather than storing tda9887-specific configuration within struct tuner. Update handling of TUNER_SET_CONFIG by tuner-core, to call &t->fe.ops.analog_demod_ops rather than &t->fe.ops.tuner_ops analog_demod_ops.set_config passes the request to tuner_ops.set_config, so this does not break other drivers. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-16tuner: add set_config to struct analog_tuner_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-13 13:37:02 +0000