Age | Commit message (Collapse) | Author |
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
VIDEO_ALSA now actually means "enable ALSA modules". Both cx88 and saa7134
are covered by it (bt87x is disabled as it may conflict with snd_bt87x in
ALSA's tree), and it now defaults to "y".
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Existing audio DMA uses conflict with cx88-alsa. This workaround disables
that code if cx88-alsa is being compiled
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Fixed double-spinlock bug
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Cleaned up some code and excessive debug left behind during development
Signed-off-by:
|
|
- There is a bug in the ioctl translations from 32bit userspace
to 64bit kernelspace in do_set_window().
- The video window (vw) should be passed to native_ioctl()
instead of the video clip.
Signed-off-by: Guy Martin <gmsoft@tuxicoman.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Peter Missel <peter.missel@onlinehome.de>
- Add support for LifeView FlyDVB Trio.
- all analog inputs are supported and working, including FM radio
- TO DO: dvb & remote control
Signed-off-by: Peter Missel <peter.missel@onlinehome.de>
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Manenti Marco <marco_manenti@colman.it>
* linux/Documentation/video4linux/CARDLIST.cx88:
* linux/drivers/media/video/cx88/cx88-cards.c:
* linux/drivers/media/video/cx88/cx88-dvb.c: (dvb_register):
* linux/drivers/media/video/cx88/cx88.h:
Add Kworld/Vstream Xpert DVB-T card with cx22702 tuner.
Signed-off-by: Manenti Marco <marco_manenti@colman.it>
Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
The audio distortion was apparently being caused by the high amount of
interrupts being generated. Increasing the buffer from 512 to 4096 seems
to fix it
Signed-off-by:
|
|
Fix signed/unsigned bug in brightness handling (set to 0 and 128 was returned).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Fix signed/unsigned bug in hue handling (set to -127 and 129 was returned).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
kernel-sync
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
It's still not perfect (lots of over and underruns), but there's now working
audio.
Dropped the videobuf queues (too geared for video...) in favor of a single
RISC databuffer, and changed the remaining code accordingly. And it works ;)
Signed-off-by:
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added VIDIOC_QUERYCTRL
- Removed unnecessary inlines.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- convert diagnostics over to the new v4l2-common.h macros.
- deprecated tuner_debug option, the new option is debug.
- renamed cx25840_debug to debug.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
- Added new v4l_err, v4l_warn, v4l_info and v4l_dbg macros to
v4l2-common.h for use in v4l-dvb i2c drivers. This ensures
a unique prefix for each device instance.
- At a later stage these macros may be reimplemented using the
device-generic macros from device.h.
- Converted the msp3400 driver to the new macros.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Split msp3400.c into msp3400-driver.c and msp3400-kthreads.c.
- Removed experimental DFPREG ioctls. If this is really needed one
day then it should be implemented using VIDIOC_G/S_REGISTER.
- Added missing BALANCE control info for VIDIOC_QUERYCTRL.
- Still more cleanup, clarified some kernel messages.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Continue cleanup effort:
- more cosmetic changes
- combine volume, balance, bass and treble into one audio
function. Revert old 2.4 code that crept in.
- print internal ioctls using new debug function.
- marked all msp3400c (aka manual) functions as such.
- removed some unused data structures.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
- Now, all internal ioctls are at v4l2-common.h
- removed unused ioctl at saa6752hs.h
- all debug ioctl code moved to v4l2-common.c
- removed duplicated stuff from other cards
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added cx23415/6 firmware documentation from the ivtv project.
- Added header containing the firmware API commands for use
by all projects that use the cx2341x. First step towards a
shared cx2341x driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Step 1 of the msp3400.c cleanup.
Most changes are all cosmetic (moved code around, renamed functions
and variables).
New additions:
- VIDIOC_LOG_STATUS for debugging.
- More user friendly messages on driver load.
- 'simple' renamed to 'autodetect'
- 'simpler' renamed to 'autoselect'
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
The module can now be removed and reloaded without problems, if the PCM
isn't opened. PCM cleanup is still missing.
Signed-off-by:
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Changed a few more things in the buffers and ALSA initialization code, but
still no luck. No IRQ activity yet, even with the IRQ mask fixed.
Signed-off-by:
|
|
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Detect when AUDC_SET_RADIO is called.
- When in radio mode ignore VIDIOC_G_TUNER.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
When in radio mode don't do anything with VIDIOC_G_TUNER.
Allow other devices to fill this.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Don't reprogram the video standard if the new standard
equals the old standard.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Use more general form for debug messages that works for both 2.4 and 2.6.
- Add V4L2 commands VIDIOC_S_TUNER, VIDIOC_G_TUNER,
VIDIOC_S_STD and VIDIOC_S_FREQUENCY.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Move signal strength level to the 0-65535 range as per V4L2 spec.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Added VIDIOC_S_AUDIO to set the audio inputs separately.
- Removed AUDC_SET_INPUT.
- Made the video inputs much more general.
- Removed cardtype CID and replaced with a CID to enable
the PVR150 workaround. The cardtype is no longer necessary
with the general video input change.
- Update VIDIOC_LOG_STATUS output to show the video and
audio inputs separately.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Add selected input to VIDIOC_LOG_STATUS output.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Replace AUDC_SET_INPUT with VIDIOC_S_AUDIO.
- Added V4L2_CID_AUDIO_MUTE.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Replace AUDC_SET_INPUT with VIDIOC_S_AUDIO.
- Added V4L2_CID_AUDIO_MUTE.
- Minimum volume is -96 dB, not -90.
- Show volume in VIDIOC_LOG_STATUS.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
- Fixes:
Warning! Found recursive dependency:
VIDEO_SAA7134_ALSA VIDEO_SAA7134_OSS VIDEO_SAA7134_ALSA
Thanks-to: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- create an array containing frequency threshold and control byte.
- allows for an arbitrary amount of
frequency ranges to be set, like dvb-pll.
- improves code readability.
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
kernel-sync.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Included advanced debug option to tvp5150.c
- Now, advanced debug info is the first item at V4L menu.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Created a new ioctl to control I2S speed. Old calls to an
inadequate V4L2 API replaced.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
- Now reset do init tvp5150 registers to its default.
- Debug messages improved.
- Implemented video standard selection function.
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
-#include <media/i2c-compat.h>
+#include "i2c-compat.h"
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
the videobuf sequence now looks complete. Still no IRQ activity, though.
Signed-off-by:
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
- Newer module to handle vp3054 secondary I2C bus.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by:
|
|
From: Chris Pascoe <c.pascoe@itee.uq.edu.au>
- Added support for VP-3054 (aka DigitalNow DNTV Live! DVB-T Pro!).
- This board has a secondary I2C bus and remote control.
- Added a new module to handle secondary I2C bus on this board.
Signed-off-by: Chris Pascoe <c.pascoe@itee.uq.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
|
|
kernels < 2.6.12
- fixed videodev.c broken backwards compat for kernels < 2.6.12
- minor whitespace cleanups
Signed-off-by: Michael Krufky <mkrufky@m1k.net>
|
|
From: Ricardo Cerqueira <v4l@cerqueira.org>
Added new ID for different revision of card #58. It's the same card,
but with a tda8275a instead of a tda8275
Signed-off-by:
|
|
- Calculate the audio master clock registers from the actual
frequencies. This simplifies the code and it also prepares
for adding CGC2 support.
- VIDIOC_INT_AUDIO_CLOCK_FREQ now receives an u32 instead of
an enum. It is more generic and actually easier to implement.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|