summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-07-13em28xx: fix webcam scalingMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> While trying to fix an mt9v001 webcam, I noticed that HSCALE/VSCALE do work with em28xx + webcam. The issue is that the scaling setup depends on the number of visible rows/cols of the input image. With mt9v011 (Silvercrest), the resolution is 640x480. So, the scaling is different from a normal TV image (720x480 on NTSC). This were causing a wrong scaling and a previous patch disabled scaling. As each sensor have their different resolution setting, the xres/yres should be adjusted accordingly with the input sensor. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-13em28xx: call sensor detection code for all webcam entriesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> With the previous approach, autodetection were working only for the two generic entries (em275x and em2820 unknown ones). So, if someone would try to force probing an specific device, the code would not properly run the autodetection code. With the new approach, the sensor autodetection will be run not only for the two generic entries, but also do webcam specific ones. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-13mt9v011: implement VIDIOC_QUERYCTRLMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12em28xx: stop abusing of board->decoder for sensor informationMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of using em28xx board decoder field for storing sensor information, let's use instead a separate field for it. Also, as sensors are currently autodetected, there's no need of having it at the boards description. So, move it to the main em28xx struct. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12em28xx: detects sensors also with the generic em2750/2750 entryMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Webcams in general don't have eeprom. So, the sensor hint code should be called to properly detect what sensor is inside. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12em28xx-cards: use is_webcam flag for devices that are known to be webcamsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> By having the webcam devices marked as such, it will help the em28xx driver to do the right thing on those devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-12em28xx: rename is_27xx to is_webcamMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Just renames the flag, to use a clearer name. Later patches will use this flag to properly set some drivers behaviors for webcams. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-10merge: http://linuxtv.org/hg/~jfrancois/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-10merge: http://linuxtv.org/hg/~eandren/v4l-dvb-prioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-10merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-rdsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-08gspca - m5602-s5k4aa: Remove erroneous register writesErik Andrén
From: Erik Andrén <erik.andren@gmail.com> A couple of erroneous register writes snuck in that made the image go haywire. Remove these. Many thanks to Grégory Lardière for finding this out Priority: high Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-07-07gspca - main: Version change.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-07-07gspca - t613: Change tas5130a init sequences.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-07-05merge: http://linuxtv.org/hg/~awalls/ivtvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05merge: http://www.linuxtv.org/hg/~dougsland/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05cx18: Add an EEPROM dump routine for the Yuan MPC718 and future cardsAndy Walls
From: Andy Walls <awalls@radix.net> Add a routine for dumping the EEPROM of the MPC718. It is generic enough to use for other cards in the future that may have an EEPROM. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-05bttv and meye: Use PCI_VDEVICEDouglas Schilling Landgraf
From: Joe Perches <joe@perches.com> Priority: normal Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-05backport commit 0a861e9eb76c68b23be1aa4758269c5b412089a9Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Date: Tue May 12 15:13:32 2009 +0000 soc-camera: unify i2c camera device platform data Unify i2c camera device platform data to point to struct soc_camera_link for a smooth transition to soc-camera as a platform driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05ivtv: Fix automatic detection of AVerMedia UltraTV 1500MCE.Andy Walls
From: Andy Walls <awalls@radix.net> My initial change left the AVerMedia UtlraTV 1500MCE card entry out of the list of cards to check during the probe. This change adds it to the ivtv_card_list[]. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-05em28xx, fix lock imbalanceDouglas Schilling Landgraf
From: Jiri Slaby <jirislaby@gmail.com> There is one omitted unlock in em28xx_usb_probe. Fix that. Priority: normal Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-05em28xx: remove uneeded varsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05em28xx: Add support for Gadmei UTV330+Mauro Carvalho Chehab
From: Zhenyu Wang <zhen78@gmail.com> em28xx: Add support for Gadmei UTV330+ Signed-off-by: Zhenyu Wang <zhen78@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05merge: http://linuxtv.org/hg/~pinchartl/uvcvideo/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-dm646xMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-04mt9v011: let's stick with datasheet values where it worksMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> The original driver for Silvercrest cameras were using some values that are different from what datasheet says. As result, it was taken very less snapshots per second than expected. A test with the datasheet values showed that they work fine and give a better frame rate. So, let's stick with datasheet values. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-04mt9v011: properly calculate image resolution registersMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Instead of working with a table of precalculated values, fill them with the proper values. Also, adds format functions that allow changing the resolution, by cropping the image to the center of the sensor. While here, move the sensor version check to the probe routine, to indicate to the caller if the sensor is not supported by this driver. Also, fixes a stupid bug where we're using &buffer[] instead of buffer[]. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-03em28xx: Add autodetection code for Silvercrest 1.3 mpixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-03uvcvideo: Set PROBE_MINMAX quirk for Aveo Technology webcamsLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Some Aveo Technology USB 2.0 Camera (1871:0306) revisions seem to require the PROBE_MINMAX quirk. As the camera supports uncompressed YUYV data only, it's safe to set the quirk even if not strictly required for all models. Update the device entry in the device IDs list. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-07-03cx18: Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353Andy Walls
From: Andy Walls <awalls@radix.net> Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353 demodulator. There are apparently some units with a DiBcom demodulator which could be supported by one of the dib7000 modules - but this is not implemented in the cx18 driver (yet). Due to lack of porgramming details for the MT352 and the mt352 module requiring a "demod_init" function, a "firmware" must be obtained and loaded to get DVB-T working for Yuan MPC-718 cards with an MT352. Priority: normal Tested-by: Steve Firth <firth650@btinternet.com> Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-03cx18: Update Yuan MPC-718 card entry with better information and guessesAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-03em28xx: Allow its usage with other different output formatsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Discovered the bug that were limiting the output format to just RGB565. Now, it is possible to output image at Bayer format (the original one, as generated by Silvercrest sensor, and two others), and also on YUY. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-02ivtv: Add card entry for AVerMedia UltraTV 1500 MCE (M113 variant)Andy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-07-02em28xx-video: fix VIDIOC_G_FMT and VIDIOC_ENUMFMT with webcamsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Webcams have different constraints than other v4l devices. This patch makes the format ioctls to behave better. It also fixes a bug at open() handler, that were always reseting resolution to the maximum available one. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-02v4l2-ioctl: avoid flooding log with unasked debug messagesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Thanks to Hans Verkuil <hverkuil@xs4all.nl> for pointing this issue on my last patch. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-02adv7343: remove unused #include <linux/version.h>Douglas Schilling Landgraf
From: Huang Weiyi <weiyi.huang@gmail.com> Remove unused #include <linux/version.h>'s in drivers/media/video/adv7343.c. Priority: normal Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> CC: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-02remove redundant tests on unsignedDouglas Schilling Landgraf
From: Roel Kluin <roel.kluin@gmail.com> input, inp and i are unsigned. When negative they are wrapped and caught by the other test. Priority: normal Signed-off-by: Roel Kluin <roel.kluin@gmail.com> CC: Andy Walls <awalls@radix.net> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-02ivtv-driver.c: Remove unnecessary semicolonsDouglas Schilling Landgraf
From: Joe Perches <joe@perches.com> Priority: normal Signed-off-by: Joe Perches <joe@perches.com> CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-02Remove unnecessary semicolonsDouglas Schilling Landgraf
From: Joe Perches <joe@perches.com> Priority: normal Signed-off-by: Joe Perches <joe@perches.com> CC: Patrick Boettcher <patrick.boettcher@desy.de> CC: Steven Toth <stoth@linuxtv.org> CC: Igor M. Liplianin <liplianin@netup.ru> CC: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-02cx18-fileops.c: Remove unnecessary semicolonsDouglas Schilling Landgraf
From: Joe Perches <joe@perches.com> Priority: normal Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Andy Walls <awalls@radix.net> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-07-01gspca - stv06xx-hdcs: Correct the pixelformatErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: high Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-06-30gspca - main: Change the ISOC initialization mechanism.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - call a new subdriver function 'isoc_init' before chosing the first alternate setting. - call a new subdriver function 'isoc_nego' when submitting the URBs failed. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-06-27gspca - vc032x: Webcam 0ac8:c301 added.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Only the back sensor (mi1320_soc) is usable. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-06-26uvcvideo: Move UVC definitions to linux/usb/video.hLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> To make UVC constants accessible by a future UVC gadget driver, move them from drivers/media/video/uvc/uvcvideo.h to include/linux/usb/video.h. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-06-26uvcvideo: Remove unused Logitech-specific constantsLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> Those constants are not used anymore, remove them. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-06-26uvcvideo: Prefix all UVC constants with UVC_Laurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> In preparation to moving UVC constants to a public location, prefix all constants with UVC_ to avoid namespace clashes. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-06-26uvcvideo: Use class-specific descriptor types from usb/ch9.hLaurent Pinchart
From: Laurent Pinchart <laurent.pinchart@skynet.be> uvcvideo.h redefines class-specific descriptor types already present in usb/ch9.h. Remove the duplicated definitions and use the ones from usb/ch9.h. Priority: normal Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be>
2009-06-24gspca - stv06xx-hdcs: Fix sensor sequence bugErik Andrén
From: Erik Andrén <erik.andren@gmail.com> All hdcs registers use bit 0 as a read/write flag and needs to be shifted one bit to the left. This wasn't accounted for when doing a sequence of writes. Priority: high Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-06-23gspca - stv06xx-hdcs: Actually update the sensor stateErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Priority: high Signed-off-by: Erik Andrén <erik.andren@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 21:27:55 +0000