summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2007-12-10tda8290: fix codingstyle, open brace following struct on the same lineMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix codingstyle issue discovered after using new checkpatch.pl ERROR: open brace '{' following struct go on the same line 396: FILE: linux/drivers/media/video/tda8290.h:24: +struct tda829x_config +{ Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tda18271: pass i2c gate configuration into tda18271_attach()Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If we pass TDA18271_GATE_DIGITAL into tda18271_attach(), it will always try to use the digital demodulator's i2c gate. If we pass TDA18271_GATE_ANALOG into tda18271_attach(), it will always try to use the analog demodulator's i2c gate. If we pass TDA18271_GATE_AUTO into tda18271_attach(), it will try to use the analog demodulator's i2c gate when tuning in analog mode, and it will try to use the digital demodulator's i2c gate when tuning in digital mode. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09saa7134: enable LNA in analog mode for Hauppauge WinTV HVR-1110Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Thanks to Hermann Pitton for noticing that this was missing. Cc: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tuner: bug-fix: default mode was set to bogus valueMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Fix type inconsistency in t->mode value, causing the following: tuner' 1-0043: freq set: unknown mode: 0x0004! (only visible with tuner debug enabled) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tuner: add struct analog_demod_info to struct analog_tuner_opsMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Store the analog demodulator name in fe.ops.analog_demod_ops.info.name Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09saa7134: Enable remote control support for Avermedia M102Mauro Carvalho Chehab
From: Albert Graham <agraham@g-b.net> This patch enabled the IR remote control for the Avermedia M102 (card=110), which appears to be the same IR as the already supported device on the Avermedia AVerTV GO 007 FM (card=57) model, the code is two one liners which enable the IR for this device (subsystem: 1461:f31e) Signed-off-by: Albert Graham <agraham@g-b.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-09tda8290: remove dependency on struct tunerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> - remove dependency of tda8290 module on struct tuner - move tuner_foo printk macros from tuner-driver.h into tuner-core.c - clean up #includes of tuner-i2c.h / tuner-driver.h Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-09tda8290: prevent possible memory leakMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Always call tda829x_release if tda829x_attach fails for a reason other than failure to allocate memory for private structure. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-08V4L: Memory leak! Fix count in videobuf-vmalloc mmapMauro Carvalho Chehab
From: Brandon Philips <bphilips@suse.de> This is pretty serious bug. map->count is never initialized after the call to kmalloc making the count start at some random trash value. The end result is leaking videobufs. Also, fix up the debug statements to print unsigned values. Pushed to http://ifup.org/hg/v4l-dvb too Signed-off-by: Brandon Philips <bphilips@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08pvrusb2: Fix compilation for OnAir Creator configMike Isely
From: Mike Isely <isely@pobox.com> The OnAir creator configuration calls for a specific tuner type to be declared. However for some old kernels that tuner type was named differently. This change adapts to the older name, when present. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: rework device descriptor layoutMike Isely
From: Mike Isely <isely@pobox.com> The pvrusb2 driver tries to keep all device specific attributes in a single data structure in one source file. This change further cleans up how that table is set up. We now try to group everything together for each specific device, and the number of symbols exported from this module has now been reduced to a single global. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: Remove obsolete (and misleading) commentMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: Remove old obsolete CONFIG flags for pvrusb2 driver.Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: Device CONFIG flags for OnAir device supportMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: Implement experimental support for OnAir Creator and USB2 devicesMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08pvrusb2: Mark Gotview hardware as having a cx2584x partMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-08tuner: combine set_tv_freq and set_radio_freq into a single set_params methodMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> We can tell whether we are tuning television or radio by testing for struct analog_parameters *params->mode == V4L2_TUNER_RADIO There is no longer any need for separate set_tv_freq and set_radio_freq functions in the analog tuner demodulator modules. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-08tda8290: access frontend structure directly, where possibleMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-08 ivtv: Some general fixesMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Fix "warning: Using plain integer as NULL pointer". Convert 'x < y ? x : y' to use min() instead. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10CodingStyle fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Miscelaneous cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Manually fixed all pertinent checkpatch.pl errors inside the source code. Also removed some unused code at the driver and a few minor cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Avoid troubles when using multiple devicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> mv_count is a counter used to move the vertical bars. Before this patch, it where a static var. This works fine for just one device. However, when using multiple devices, every device would increment it. This patch moves it to its correct place: struct vivi_dev. So, now, each device has its own data. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Allow vivi to open multiple video devicesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Now, it is possible to open multiple vivi devices, by using n_devs parameter. This makes vivi driver closer to a real one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-10Fix vivi to support non-zero minor nodeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> There were a trouble at vivi driver when using non-zero inodes. This where due to not properly preserving the minor inode after calling video_register. Since this driver is a reference for newer drivers, and it is possible to have more than one video device inside the machine, this patch makes vivi to dynamically allocate video_device struct. Thanks to Gregor Jasny <jasny@vidsoft.de> for pointing the issue. Also, this patch removes a very anoying (but useless) message of not having a proper release call. CC: Gregor Jasny <jasny@vidsoft.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: remove i2c legacy support from drivers that no longer need itHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-07 v4l-nopage-fixMauro Carvalho Chehab
From: Andrew Morton <akpm@linux-foundation.org> dont just copy-and-paste stuff. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-08ivtv: convert to bus-based i2c API.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: select VIDEO_IR in KconfigHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: add AVerMedia EZMaker PCI Deluxe supportHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support for the AVerMedia EZMaker PCI Deluxe and update the ivtv cardlist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-08ivtv: update version number to 1.2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-12-07Subject: v4l: nopageMauro Carvalho Chehab
From: Nick Piggin <npiggin@suse.de> Convert v4l from nopage to fault. Remove redundant vma range checks. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07merge: http://linuxtv.org/hg/~mkrufky/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Fix some errors at the video_ioctl2 conversionMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Reorder functions to make easier to compare with the previous codeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> After this patch, the order of the functions will be the same as before the patch converting the driver to user video_ioctl2. This makes easier to diff between the previous version and the newer one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07Converted saa7134-video to use video_ioctl2Mauro Carvalho Chehab
From: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-07saa7134-dvb: fix tuning for WinTV HVR-1110Michael Krufky
From: Benoit Istin <beistin@gmail.com> There are several months my hvr1110 stop working. This is very simple to fix, for my card revision at least, by setting a missing field to the hauppauge_hvr_1110_config. Signed-off-by: Benoit Istin <beistin@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-06cx23885: enable EZ-QAM mode for Hauppauge WinTV HVR-1800Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Add module option 'alt_tuner' disabled by default. When set to one, the dvb_frontend of HVR1800 will consist of: s5h1409 demod + tda18271 tuner When set zero (default), the dvb_frontend of HVR1800 will consist of: s5h1409 demod + mt2131 tuner note: The tda18271 is usually used for analog tuning on this board. If the tda18271 is used in digital mode, you will not be able to tune an analog channel at the same time. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-12-03merge: http://linuxtv.org/hg/~hverkuil/v4l-dvb-yuvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-03merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-02pvrusb2: Recognize ATSC video standard bit valuesMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: minor rework for default video standard handlingMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: When a per-device-type default video standard is declared, handle it in such a way that it can be correctly and unambiguously reported in the system log. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Expand comment in device attributes description.Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Remove use of volatile in pipeline control state machineMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: Eliminate use of volatile in pipeline control state variables. These were all cases of paranoia; upon further review the overall mechanism employed here should not require use of volatile. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Remove use of volatile in command sequencerMike Isely
From: Mike Isely <isely@pobox.com> pvrusb2: Remove use of volatile for command sequencer; these variables are set by interrupt-context code and we check their state in such a manner that there should be no race conditions. This had originally been done out of paranoia, and I have since been convinced that the paranoia is not required. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Implement default standard selection based on device typeMike Isely
From: Mike Isely <isely@pobox.com> This adds a default video standard setting to the pvr2_device_desc structure for describing device types. With this change it is possible to set a reasonable default standard based on device type. Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02pvrusb2: Change division to bit-or for tveeprom standardsMike Isely
From: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Mike Isely <isely@pobox.com>
2007-12-02 ivtv: Remove a invalid shadow-variableMauro Carvalho Chehab
From: Richard Knutsson <ricknu-0@student.ltu.se> Remove the shadowing 'struct v4l2_chip_ident *chip', since it already exists and makes the if-statement useless. Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 18:04:27 +0000