summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-05-24Add support for Terratec Grabster AV350Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-23em28xx: add Terratec GrabbyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-18merge: http://kernellabs.com/hg/~dheitmueller/em28xx-isoc-fixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-18merge: http://kernellabs.com/hg/~dheitmueller/au0828-oldkernel-compilefixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-16em28xx: properly set packet size based on the device's eeprom configuration.Devin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> The em28xx actually has a register that tells the driver what the maximum packet size is (based on a value programmed into the eeprom). Make use of that register instead of assuming a hardcoded value of 564 (since 564 is not correct for devices that do QAM such as the KWorld 340u). Note that for now the em2874 code isn't there, falling back to the 564 value, however this is not a problem since there are not any em2874 based devices in the current v4l-dvb tree). Thanks to Jarod Wilson for detecting the initial problem and figuring out that the isoc configuration was wrong for his device. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Jarod Wilson <jarod@wilsonet.com>
2009-05-14au0828: get rid of debug printk that was causing compile failuresDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Remove a debug printk() line I added which is no longer needed, and happened to be causing compile failures on some earlier kernels in Han's daily compile report. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-05-14cx88: remove xc5000 reset for Pinnacle 800iDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> According to the engineer at PCTV Systems, the xc5000 reset pin is supposed to be on GPIO12. However, despite three nights of effort, pulling that GPIO low didn't reset the xc5000. While pulling MO_SRST_IO low does reset the xc5000, this also resets in the s5h1409 being reset as well. This causes tuning to always fail since the internal state of the s5h1409 does not match the driver's state. Given that the only two conditions in which the driver performs a reset is during firmware load and powering down the chip, I am taking out the reset. We know that the chip is being reset when the cx88 comes online, and not being able to do power management for this board is better than not having any tuning at all. Problem discovered when implementing proper power management for the xc5000, which results in calls to the reset callback *after* s5h1409 is initialized. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: Chaogui Zhang <czhang1974@gmail.com>
2009-05-14merge: http://linuxtv.org/hg/~mkrufky/k2c2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-12cx23885: clean up struct names for Hauppauge WinTV-HVR127X devicesMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-12cx23885: update model matrix for "k2c2" retail boardsMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-12cx23885: add DVB-T tuning support for Hauppauge WinTV-HVR1210Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-112: handle unregister for non-I2C buildsMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Build fails when CONFIG_I2C=n, so handle that case in the if block: drivers/built-in.o: In function `v4l2_device_unregister': (.text+0x157821): undefined reference to `i2c_unregister_device' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11merge: http://linuxtv.org/hg/~mcisely/pvrusb2-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-11soc_camera: depends on I2CGuennadi Liakhovetski
From: Randy Dunlap <randy.dunlap@oracle.com> soc_camera uses i2c_*() functions and has build errors when CONFIG_I2C=n: ERROR: "i2c_new_device" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_get_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_put_adapter" [drivers/media/video/soc_camera.ko] undefined! ERROR: "i2c_unregister_device" [drivers/media/video/soc_camera.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-05-09pvrusb2: Allocate a routing ID for future support of Terratec Grabster AV400Mike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-05-09soc-camera: Fix section mismatch warningGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> modpost needs a __refdata marker in driver structs to ensure references to .probe and .remove functions from .devinit.text and .devexit.text sections respectively are valid. Add __refdata to soc_camera_pdrv platform driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2009-05-08tveeprom: Point the TCL MNM05-4 tuner entry to an actual tuner definitionAndy Walls
From: Andy Walls <awalls@radix.net> The TCL MNM05-04 is used on some HVR-1600 models. It appears to be similar to the TCL MFMN05-4 but without FM radio. The TUNER_PHILIPS_FM1236_MK3 tuner definition appears to be the proper existing tuner definition to use for this tuner. Reported-by: Matt Beadon <matt.beadon@gmail.com> Priority: normal Tested-by: Matt Beadon <matt.beadon@gmail.com> Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-08cx18: Add missing newline to tuner detection error messageAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-05-08cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1255Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-08cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1275Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-07soc-camera: prepare for the platform driver conversionGuennadi Liakhovetski
Add a platform driver to soc_camera.c. This way we preserve backwards compatibility with existing platforms and can start converting them one by one to the new platform-device soc-camera interface. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2009-05-07Analog Devices ADV7343 video encoder driverMauro Carvalho Chehab
From: Chaithrika U S <chaithrika@ti.com> Add ADV7343 I2C based video encoder driver. This follows the v4l2-subdev framework. This driver has been tested on TI DM646x EVM. It has been tested for Composite and Component outputs. Updates as per review by Mauro Chehab, added support for more standards supported by the encoder. Also adding the missed out signed-offs.Tested only NTSC and PAL standards. Signed-off-by: Manjunath Hadli <mrh@ti.com> Signed-off-by: Brijesh Jadav <brijesh.j@ti.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> [hverkuil@xs4all.nl: s_routing API changed, updated driver to use new API] Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-07TI THS7303 video amplifier driver codeMauro Carvalho Chehab
From: Chaithrika U S <chaithrika@ti.com> This patch adds driver for TI THS7303 video amplifier. This driver is implemented as a v4l2 sub device. Tested on TI DM646x EVM. This version has updates based on review comments by Mauro Chehab. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-06au0828: send command to power down tuner when done with analogDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Make sure the au0828 issues the command to power down the tuner when the user is done using analog support. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-05-05merge: http://linuxtv.org/hg/~eandren/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05cafe_ccic: use = instead of == for setting a value at a varMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> /home/v4l/master/v4l/cafe_ccic.c: In function 'cafe_cam_init': /home/v4l/master/v4l/cafe_ccic.c:778: warning: statement with no effect Priority: high CC: Hans Verkuil <hverkuil@xs4all.nl> CC: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-03cx23885: add ATSC/QAM tuning support for Hauppauge WinTV-HVR1270Michael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-03gspca - stv06xx-vv6410: Set analog gain at initErik Andrén
From: Erik Andrén <erik.andren@gmail.com> Set the analog gain at sensor init. Also set a sensible default value. Priority: normal Signed-off-by: Erik Andrén <erik.andren@gmail.com>
2009-05-03cafe_ccic: fix sensor detectionMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Due to an uninitialized chip.ident field the chip identification failed. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: saeed bishara <saeed.bishara@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02zoran: Fix &&/|| typoMauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> Fix &&/|| typo Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02V4L/DVB: cleanup redundant tests on unsignedMauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> Remove redundant tests on unsigned. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv/radio: fix V4L2_TUNER_MODE/V4L2_TUNER_SUB confusionMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> V4L2_TUNER_MODE_ was used in a few places where V4L2_TUNER_SUB_ should have been used. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02cx23885: Add preliminary support for the HVR1270Steven Toth
From: Steven Toth <stoth@kernellabs.com> The patch means the board will be recognised, and the parts brought out of reset correctly. This patches depends on the centralized GPIO patch to be merged. What's missing before the HVR-1270 will function for DTV? The model# needs to be added to avoid 'unknown model' output and the LG3305/Tuner need to be attached in cx23885-dvb.c Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-11cx23885: mark functions encoder_on_port[bc] as static inlineMichael Krufky
From: Michael Krufky <mkrufky@kernellabs.com> Priority: normal Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-02cx23885: Add generic functions for driving GPIO'sSteven Toth
From: Steven Toth <stoth@kernellabs.com> The GPIO's on the product can be in one of three places. To date we've mainly used the GPIO's on the bridge itself, and once on the encoder. Rather than having the complexity of multiple GPIO writes/reads from isolated placed in the driver we'll route them through this function, so we can make intelligent decisions about 1) Where the GPIO lives and 2) Whether it conflicts (based on board) with some other function to avoid bugs. Priority: normal Signed-off-by: Steven Toth <stoth@kernellabs.com> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
2009-05-09merge: http://www.linuxtv.org/hg/~stoth/tda10048Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05pvrusb2: Ensure the PVRUSB2 disabled the i2c gate on the tda10048.Steven Toth
From: Steven Toth <stoth@linuxtv.org> ... else DVB-T tuning will not work. Priority: high Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2009-05-02ivtv: fix incorrect bit testsMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Found the coccinelle tool. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02pvrusb2: Ensure we specify the I/F at attach time.Steven Toth
From: Steven Toth <stoth@linuxtv.org> pvrusb2: Ensure we specify the I/F at attach time. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2009-05-02cx23885: For tda10048 boards ensure we specify the I/FSteven Toth
From: Steven Toth <stoth@linuxtv.org> cx23885: For tda10048 boards ensure we specify the I/F Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2009-05-02v4l2-device: unregister i2c_clients when unregistering the v4l2_device.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Until now I relied on i2c_del_adapter to unregister the i2c_clients for me, however, if the i2c bus is a platform bus then it is never deleted. So instead I need to unregister i2c clients when unregistering the v4l2_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv: use v4l2_device_set_name.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02v4l2: add v4l2_device_set_name()Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Add a utility function that can be used to setup the v4l2_device's name field in a standard manner. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02tuner: remove tuner_i2c_address_checkMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Support for tuners with i2c addresses >= 0x65 is dropped since no tuners with addresses in the range 0x65-0x6f have been found. This patch removes addresses 0x65-0x6f from the list of tuner probe addresses, it removes the kernel warning that warned if addresses in this range appeared, and it removed a hack for the cx88 that is no longer needed now that the tuner address range is reduced. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02uvc: fix compile warningMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> The 2.6.30 kernel generates this warning: uvc_driver.c:1729: warning: 'ret' may be used uninitialized in this function I guess some new warning flag must have been turned on since this warning didn't appear with older kernels (gcc version 4.3.1). It's also a bogus warning, but since this code didn't comply to the coding standard anyway I've modified it to 1) remove the warning and 2) conform to the coding standard. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-02ivtv: fix compiler warning.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-05merge: http://www.linuxtv.org/hg/~stoth/cleanupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-01pvrusb2: remove driver_data direct access of struct deviceMike Isely
From: Greg Kroah-Hartman <gregkh@suse.de> In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Priority: normal Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mike Isely <isely@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-11 06:24:50 +0000