summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2006-07-26Merge from masterMike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-25bttv: clean up some pre-2.6.0 class device compat stuffTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add bit of compat code for class_device_create_file() to compat.h for pre-2.6.0 kernels. This allows an #ifdef to be removed from bttv-driver.c, and helps other code which never had one. Changed the code to turn on for pre-2.6.0, rather than pre-2.5.0, as the class device stuff was added in 2.5.69. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25bttv: use class_device_create_file and handle errorsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Revert bttv-driver.c from video_device_create_file() to use class_device_create_file() again. video_device_create_file() is only available when V4L1 is on. Proper error checking is added for failure of class_device_create_file(). Will print error message and unroll partially created sysfs entries. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25videodev: Handle class_device related errorsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add proper error checking and roll-back for failure of class_device_create_file() in videodev.c. Print error messages and unroll partially created sysfs entries. Also, failure of class_device_register() in video_register_device() is handled correctly. It was failing to de-allocate the minor number. This must be done in video_register_device(), since the caller has no way of knowing if failure occurred before or after the class device was registered. Also added an error message if video_register_device() is called with an unknown type, which should never happen. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-25Remove of couple of useless linesTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> A buffer was set just before an if block, and then again in both branches of the if. Obvious coding error. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-24OVERLAY flag were enabled by mistakeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> A patch from Aug, 17 activated by mistake OVERLAY flag on cx88-video, together with several cx88-blackbird cleanups. This makes the cx88 driver to report: /dev/video0 [v4l2]: ioctl VIDIOC_G_FBUF: Invalid argument instead of: /dev/video0 [v4l2]: no overlay support Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-24cx88: Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann PCI TV Tuner card supportMichael Krufky
From: David Bussenschutt <buzz@oska.com> Add support for Shenzhen Tungsten Ages Tech TE-DTV-250 OEM for Swann PCI TV Tuner Card Signed-off-by: David Bussenschutt <buzz@oska.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add support for Norwood PCI TV Tuner (non-pro)Michael Krufky
From: Peter Naulls <peter@chocky.org> This patch adds support for Norwood PCI TV Tuner (non-pro) Signed-off-by: Peter Naulls <peter@chocky.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add autodetection support for AverMedia M150-DMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch adds autodetection support for the AverMedia M150-D blackbird MPEG encoder / analog video capture card. This board is known to work with the ASUS PVR 416 configuration. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-24cx88: add initial support for Hauppauge HVR3000 trimode cardMichael Krufky
From: Eric Thomas <ethomas@claranet.fr> add initial support for Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T only analog is working for now Signed-off-by: Eric Thomas <ethomas@claranet.fr> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-23merge: masterMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-23Fix broken dependencies on media Kconfig Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-23Fix for compilation without V4L1 or V4L1_COMPATMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Removed usage of HAVE_V4L1 Including videodev.h will just include videodev2.h if V4L1 is not supported V4L1 code at core drivers will honor CONFIG_V4L1_COMPAT stuff Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-22Correctly handle sysfs error leg file removal in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Take note of which sysfs files / groups that the pvrusb2 successfully creates and only delete those specific items when tearing things down. (Previously we just blindly tore everything down every time.) Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-22Clean up some post mpeg-controls issues in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Fix a few miscellaneous issues in the pvrusb2 driver related to use of the new mpeg controls. This also should fix problems involving update of the saa7115 / cx25840 configuration as control changes are made. Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-21VIDIOCSMICROCODE were missing on compat_ioctl32Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> video_code size is 24 on i386 and 32 on x86_64, so a proper handling is needed on compat_ioctl32 to fix it. This code should be tested, since just *a few* boards use this ioctl. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Removed the remaining config.h stuffMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Since kernel include autoconf.h via command line, those config.h inclusion can be removed. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19merge: http://linuxtv.org/hg/~mcisely/pvrusb2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Several other backports from kernel to v4l/dvb treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] release_firmware() fixesMauro Carvalho Chehab
From: Magnus Damm <magnus@valinux.co.jp> Use release_firmware() to free requested resources. According to Documentation/firmware_class/README the request_firmware() call should be followed by a release_firmware(). Some drivers do not however free the firmware previously allocated with request_firmware(). This patch tries to fix this by making sure that release_firmware() is used as expected. kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Acked-by: Marcel Holtmann <marcel@holtmann.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] 64bit resource: fix up printks for resources in video driversMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> This is needed if we wish to change the size of the resource structures. kernel-sync: backport from kernel to v4l/dvb tree Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] irq-flags: media: Use the new IRQF_ constantsMauro Carvalho Chehab
From: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] devfs: Remove the videodevice devfs_name field as it's no longer neededMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] devfs: Remove the devfs_fs_kernel.h file from the treeMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> Also fixes up all files that #include it. kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] devfs: Remove devfs_remove() function from the kernel treeMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> Removes the devfs_remove() function and all callers of it. kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19[PATCH] devfs: Remove devfs_mk_cdev() function from the kernel treeMauro Carvalho Chehab
From: Greg Kroah-Hartman <gregkh@suse.de> Removes the devfs_mk_cdev() function and all callers of it. kernel-sync: backport from kernel to v4l/dvb tree Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-19Remove obsolete #include <linux/config.h>Mauro Carvalho Chehab
From: Jörn Engel <joern@wohnheim.fh-wedel.de> kernel-sync: Kernel adds "-include include/linux/autoconf.h" for every file to be compiled, so, including config.h is not required. Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-18Refine dead code elimination in pvrusb2Mike Isely
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com>
2006-07-18videodev: remove bad kfree()Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This fixes a previous commit -- We shouldnt kfree(&vfd->class_dev) inside video_register_device, since the resource is not allocated inside this function. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18pvrusb2: check the return value of class_device_create_fileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> class_device_create_file is marked as __must_check, so its return value must be checked. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18pvrusb2: check the return value of class_device_registerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If an error occurs during class_device_register, print an error message, kfree(class_dev) and return. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18videodev: check the return value of class_device_registerMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> If an error occurs during class_device_register, print an error message, kfree(&vfd->class_dev), and return the error code to the caller of video_register_device. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18videodev: replace class_device_create_file with video_device_create_fileMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> This patch replaces the call to class_device_create_file with video_device_create_file, as defined in v4l2-dev.h, so that the return value of class_device_create_file will be checked. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-18Check __must_check warning in video_device_create_fileMauro Carvalho Chehab
From: Michael Krufky <mkrufky@linuxtv.org> This patch moves the check from bttv-driver.c into v4l2-dev.h, because all other callers of video_device_create_file must also be checked. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-17Set the Auxiliary Byte when tuning LG H06xF in analog modeMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> With the LG H06xF tuners, an auxiliary byte must be sent after the standard four-byte i2c sequence. The code that does this is currently in the wrong place, causing random bytes to be written to the tuner over i2c in the set_type function. This patch moves this code from set_type to default_set_tv_freq. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2006-07-17Bugfix for keycode calculation on NPG remotesRicardo Cerqueira
From: Ricardo Cerqueira <v4l@cerqueira.org> Fix keycode calculations (all codes for this remote were wrong due to a lost + sign) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org>
2006-07-15Saa7134: rename dmasound_{init, exit}Mauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> Two different exports with the same name are not a good idea: $ grep -r EXPORT_SYMBOL\(dmasound_init\) * drivers/media/video/saa7134/saa7134-core.c:EXPORT_SYMBOL(dmasound_init); sound/oss/dmasound/dmasound_core.c:EXPORT_SYMBOL(dmasound_init); $ This patch renames the saa7134 dmasound_{init,exit} to saa7134_dmasound_{init,exit}. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-15Added PCI ID of the Genius VideoWonder Dual CardbusHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> It is just another Lifeview clone Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-07-15Added PCI ID for AverMedia DVB-T 777 with SAA7133Hartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> The change is just an additional PCI ID Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-07-15added support for the md8800 quadro boardHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> Analog TV, CVBS, S-video and DVB-T are working, DVB-S not yet Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-07-15Support non interlaced capture by default for saa713xHartmut Hackmann
From: Hartmut Hackmann <hartmut.hackmann@t-online.de> This patch just sets the option noninterlaced to 1 by default since it has no known disadvantages. It is still possibe to get the old behaviour by setting noninterlaced=0. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
2006-07-15Previous patch broke compilation for kernels <2.6.18. Fixing.Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-15Add some mutex to semaphore backward compatability changesTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Standard back compatability changes, for struct mutex added after 2.6.15. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-15Add compat.h code for schedule_timeout_interruptible()Trent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add a static inline version of schedule_timeout_interruptible(), it's only two lines, to compat.h. This will make bt866 and ks0127 compile with pre 2.6.14 kernels. Remove #if/#else code from msp3400, saa7134-tvaudio, and vivi that used to handle this. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2006-07-15From: Randy Dunlap <rdunlap@xenotime.net>Mauro Carvalho Chehab
Check all __must_check warnings in bttv. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-10Remove stradis MODULE_DEVICE_INFO definitionAndrew de Quincey
From: Andrew de Quincey <adq_dvb@lidskialf.net> To prevent autoloading of the driver, as it then conflicts with every other saa7146 device in existence. Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
2006-06-30Add support for the TCL M2523_3DB_E tuner.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2006-06-30Clean out a zillion sparse warnings in pvrusb2Mauro Carvalho Chehab
From: Mike Isely <isely@pobox.com> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-30Pvrusb2/: possible cleanupsMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch contains the following possible cleanups: - make needlessly global code static - #if 0 unused global functions Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-29cx88: add support for Geniatech Digistar / Digiwave 103gMichael Krufky
From: Saqeb Akhter <johoja@gmail.com> This patch adds support for the Geniatech Digistar, aka Digiwave 103g DVB-S card. Signed-off-by: Saqeb Akhter <johoja@gmail.com> Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-07 23:15:08 +0000