summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2008-09-22cx88: HVR3000 / 4000 GPIO related changesSteven Toth
From: Steven Toth <stoth@linuxtv.org> Patch by Darron Broad. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-22cx88: Enable TDA9887 on HVR1300 / 3000 / 4000Steven Toth
From: Steven Toth <stoth@linuxtv.org> Patch provided by Darron Broad. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-22S2API: Add Kconf dependencySteven Toth
From: Steven Toth <stoth@linuxtv.org> Patch provided by Darron Broad Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-17Added support for TBS 8920 DVB-S/S2 cardOleg Roitburd
From: Oleg Roitburd <oroitburd@gmail.com> Added support for TBS 8920 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com>
2008-09-17Added support for Omicom SS4 DVB-S/S2 cardoleg@compaq.Office.local
From: Oleg Roitburd <oroitburd@gmail.com> Added support for Omicom SS4 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Oleg Roitburd <oroitburd@gmail.com> user: Oleg Roitburd <oroitburd@gmail.com>
2008-09-21HVR3000/4000 Hauppauge related IR cleanupsSteven Toth
From: Darron Broad <darron@kewl.org> From the author: This patch-set fixes remote control issues I have experienced with hauppauge drivers in Linux since the PVR-350 and now with both a NOVA-S+ and HVR-4000. It has also been confirmed to work with an HVR-1300 user who had exactly the same issue. Hauppage remote controls use RC5. RC5 has a bit-field which represents the target device. The hauppauge windows drivers have a registry key which can enable filtering, but the linux drivers will accept any target device in this bit field for internal processing. This causes problems with setups such as mythtv where remote control key presses destined for the TV (target = 0) are interpreted by the kernel and subsequenctly LIRC then mythtv. Of the remote controls I have to hand (wintv black, pvr/hvr silver) the hauppauge remotes send one of two device targets ids, these are interpreted by the patch which then filters out any non hauppauge addresses. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-14S2API: cx24116 Rolloff changes, sysctls cleanup, isl power changes.Steven Toth
From: Darron Broad <darron@kewl.org> Remove the debugging sysctls. Rolloff was broken, not it works as expected and has been tested in kaffeine. Power related changes for the isl6421 are not implemented on the HVR4000/4000LITE. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Darron Broad <darron@kewl.org>
2008-09-13Nova-se2 / Nova-s-plus Intersil6421 power fix to support switches.Steven Toth
From: Steven Toth <stoth@linuxtv.org> Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-09-04Added support for TeVii S460 DVB-S/S2 cardIgor M. Liplianin
From: Igor M. Liplianin <liplianin@me.by> Added support for TeVii S460 DVB-S/S2 card. The card based on cx24116 demodulator. Signed-off-by: Igor M. Liplianin <liplianin@me.by>
2008-09-04cx88: Add support for the Hauppauge HVR4000 and HVR4000-LITE (S2) boardsSteven Toth
From: Steven Toth <stoth@linuxtv.org> Adding support for Hauppauge's cx88 S2 based products, based on the cx24116 DVB-S2 demodulator. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-08-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-30bt856: fix define conflictHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-30compat: add current_uid define to fix compile errors on kernels < 2.6.27Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-29uvcvideo: Add support for a Bison Electronics webcam found in the Fujitsu ↵Mauro Carvalho Chehab
Amilo SI2636. From: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29uvcvideo: Supress spurious "EOF in empty payload" trace messageMauro Carvalho Chehab
From: Laurent Pinchart <laurent.pinchart@skynet.be> Pass the payload size instead of the header size to uvc_video_decode_end() to avoid generating an extra trace message for each frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29v4l2: use register_chrdev_region instead of register_chrdevHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Replace the old register_chrdev with the more flexible register_chrdev_region. Ensure that the release() is called when the very last chardev usage was released, and not when the sysfs devices were removed. This should simplify hotpluggable drivers considerably. Tested-by: Mike Isely <isely@isely.net> Tested-by: Laurent Pinchart <laurent.pinchart@skynet.be> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: David Ellingsworth <david@identd.dyndns.org> Reviewed-by: Hans de Goede <j.w.r.degoede@hhs.nl>
2008-08-29s2255drv: adds JPEG compression quality controlMauro Carvalho Chehab
From: Dean Anderson <dean@sensoray.com> adds VIDIOC_S_JPEGCOMP and VIDIOC_G_JPEGCOMP ioctls for controlling JPEG compression quality. Signed-off-by: Dean Anderson <dean@sensoray.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-devMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~awalls/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-28dabusb_fpga_download(): fix a memory leakMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> This patch fixes a memory leak in an error path. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-28vivi_release(): fix use-after-freeMauro Carvalho Chehab
From: Adrian Bunk <bunk@kernel.org> video_device_release() does kfree(), which made the following printk() doing a use-after-free. printk() first and release then. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-27CRED: Wrap task credential accesses in video input driversMauro Carvalho Chehab
From: David Howells <dhowells@redhat.com> Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~jfrancois/gspca/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~stoth/cx23885-leadtekMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://www.linuxtv.org/hg/~stoth/cleanupsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29merge? http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-empressMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-29gspca: Same pixfmt as the sn9c102 driver and raw Bayer added in sonixb.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> 1) Lower the hstart setting for all sensor by 1 so that we generate (compressed) BGGR data just like sn9c102 does (instead of GBRG data) 2) Add support for raw bayer output in the lowest resolutions (not enough bandwidth for higher resolutions), this should work with all sensors but to be sure only enable it for sensors where it has been tested. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Have a bigger buffer for sn9c10x compressed images.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Under certain conditions sonixb compressed frame size can get bigger then the uncompressed size (seen with 0c45:6028), so make the buffers slightly bigger. Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-29gspca: Cleanup the sonixb code.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -the usb-id table caried several flags which were not usb-id specific but sensor specific, add a sensor_data array and move these flag there -fr_h_sz was being abused to store and check which bridge was being used instead add a bridge member to the sd struct -now that we have a sensor_data table use that to store pointers to init_sequences instead of using switch cases on sd->sensor Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28gspca: Bad pixelformat of vc0321 webcams.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-28Steven Toth email address changeSteven Toth
From: Steven Toth <stoth@hauppauge.com> I need this so I can better isolate my linux email from my corporate email. Priority: normal Signed-off-by: Steven Toth <stoth@linuxtv.org>
2008-08-28gspca: Resolve webcam conflicts between some drivers.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -remove USB-id's from zc0301 for cams for which zc0301.c does not support the sensor -remove USB-id's from sn9c102 for cams where sn9c102 does not support the bridge sensor combination -no longer make inclusion of usb id's removed from zc0301 and sn9c102 conditional in gspca -fix conditional inclusion of USB-id's in gspca to also work when the conflicting drivers are build as a module -add a number of USB-id's to gspca from various windows .inf files: 0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support) 041e:4022 from creative webcam nx pro, same as already supported 041e:401e 0ac8:0301 from generic zc0301 driver which supports many sensors 10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus) Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-27VIDEO_SH_MOBILE_CEU should depend on HAS_DMA (was: Re: m68k allmodconfig)Geert Uytterhoeven
Hi Andrew, On Thu, 14 Aug 2008, Andrew Morton wrote: > ERROR: "dma_alloc_coherent" [drivers/media/video/videobuf-dma-contig.ko] undefined! > ERROR: "dma_sync_single_for_cpu" [drivers/media/video/videobuf-dma-contig.ko] undefined! > ERROR: "dma_free_coherent" [drivers/media/video/videobuf-dma-contig.ko] undefined! M68k allmodconfig still selects Sun-3, which sets NO_DMA. I guess you're also seeing this on the other NO_DMA platforms (h8300, m32r, s390, and PCI-less SPARC)? Below is a patch. Shouldn't it also (or instead) depend on SUPERH or some SuperH platform? Or is this not done to have more compile-coverage? Subject: [PATCH] VIDEO_SH_MOBILE_CEU should depend on HAS_DMA commit 0d3244d6439c8c31d2a29efd587c7aca9042c8aa ("V4L/DVB (8342): sh_mobile_ceu_camera: Add SuperH Mobile CEU driver V3") introduced VIDEO_SH_MOBILE_CEU, which selects VIDEOBUF_DMA_CONTIG. This circumvents the dependency on HAS_DMA of VIDEOBUF_DMA_CONTIG. Add a dependency on HAS_DMA to VIDEO_SH_MOBILE_CEU to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
2008-08-27[v4l-dvb-maintainer] [PATCH] v4l: mt9m111.c make function staticHarvey Harrison
drivers/media/video/mt9m111.c:758:5: warning: symbol 'mt9m111_restore_state' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- New warning in next-20080825 drivers/media/video/mt9m111.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
2008-08-27gspca: Move some probe code to the new init function.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-27gspca: Have a clean kmalloc-ated buffer for USB exchanges.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> The USB buffer may be used for DMA and there may be a caching problem if the buffer is part of the device structure. Thanks to Alan Stern. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Set the clock at the end of initialization in sonixj.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26A simple state machine was added to saa7134_ts.Hans Verkuil
From: Dmitry Belimov <d.belimov@gmail.com> A simple state machine was added to saa7134_ts. It has three states: SAA7134_TS_STOPPED SAA7134_TS_BUFF_DONE SAA7134_TS_STARTED When buffer_setup is run we start the TS initialization: set SAA7134_TS_STOPPED. When all buffers are prepared we write data into DMA register and set SAA7134_TS_BUFF_DONE. When the first buffer is active start TS and set SAA7134_TS_STARTED. When ts_release is called stop TS and set SAA7134_TS_STOPPED. Priority: normal Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-26gspca: Stop pac7302 autogain oscillation.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Webcam Labtec 2200 (093a:2626) added in pac7311.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26saa7134-empress: remove incorrect IRQ defines for TSHans Verkuil
From: Dmitry Belimov <d.belimov@gmail.com> SAA7134_IRQ1_INTE_RA2_3 and SAA7134_IRQ1_INTE_RA2_2 are used for planar video, not for TS. Priority: normal Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-26saa7134-empress: insert leading null bytes for Beholder M6 empress cardsHans Verkuil
From: Dmitry Belimov <d.belimov@gmail.com> Additional code to improve the init sequence and add board type tests were done by Hans Verkuil. Priority: normal Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2008-08-26gspca: More controls for pac73xx and new webcam 093a:2624.Jean-Francois Moine
From: Hans de Goede <j.w.r.degoede@hhs.nl> -Add usb id for 093a:2624 (pac7302) -Report some controls to userspace with 7302 only, as they are 7302 only -Add gain and exposure controls -Add autogain -Fix 7302 imaged being mirrored by default Priority: high Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Too much code removed in the suspend/resume changeset.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - the stream must stop when the main application closes the device. Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: H and V flips work for ov7670 only in ov519.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-26gspca: Change some subdriver functions for suspend/resume.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - new function 'init' called on probe and resume - remove the functions 'open' and 'closed' - 'stopN' and 'stop0' are optional Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2008-08-25V4L/DVB: follow lspci device/vendor styleMauro Carvalho Chehab
From: Bjorn Helgaas <bjorn.helgaas@hp.com> Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-25merge: v4l-dvbJean-Francois Moine
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 20:39:05 +0000