summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2007-08-05cx25840: fix audio mute handling and reportingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Audio muting for the tuner input was implemented by stopping the audio microcontroller and restarting it on unmute. However, it appears that this method can actually crash the audio firmware. It's rare and seems to happen with NTSC only. It has been reimplemented by setting to volume to 0. In addition, the reporting of the mute state has been improved as well: it used to be impossible to detect whether the audio was muted by the user or if it was muted due to the microcontroller trying to detect the audio standard. This is now clearly stated. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-05ivtv: simplify setting CONFIG_XC3028Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: add AverMedia M116, prepare for userspace Xceive tunerHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> - Split Club3D card from Yuan PG600-2, GotView PCI DVD Lite (different composite input) - Add AVerTV MCE 116 Plus (M116) card - Allow Xceive cards to be used without Xceive support - Update Xceive support to latest userspace tuner (still not on by default, pending inclusion of userspace tuner in the kernel). - Use CONFIG_XC3028 rather than HAVE_XC3028: gentree.pl will remove them automatically. Thanks to Markus Rechberger for help with the userspace tuner support. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: make VIDIOC_INT_RESET support smarter.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add support to optionally reset the IR and/or the video digitizer. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04cx25840: resetting also requires reloading the firmwareHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Resetting without reloading the firmware is not enough. Sometimes the firmware is 'stuck' and needs to be reloaded. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-04ivtv: show card name as well in the LOG_STATUS output.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-09V4L: Add additional ioctls to compat_ioctl32Mauro Carvalho Chehab
From: Steven Walter <stevenrwalter@gmail.com> With the addition of these ioctls, I'm able to watch TV with a 32-bit version of tvtime on x86_64. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-09From: Simon Arlott <simon@fire.lp0.eu>Mauro Carvalho Chehab
Since videobuf_waiton is called with intr=1, it can return -EINTR and therefore err may be non-zero. This happens when the system goes into the standby state. Without the BUG() occurring, there's no problem with standby mode while DVB is being used. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-06Arv.c: fix memset in ioctlMauro Carvalho Chehab
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Hello, Looks like memset() is zeroing wrong nr of bytes. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-06Dev.c: memset fixMauro Carvalho Chehab
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Hello, Looks like memset() is zeroing wrong nr of bytes. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-06Zoran_driver.c: fix memset in ioctlMauro Carvalho Chehab
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Hello, Looks like memset() is zeroing wrong nr of bytes. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-03merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-03tuner: Better tuner radio supportTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add radio support for the Thomson DTT7612 tuner. This tuner uses a different 1st intermediate frequency than the other radio tuners supported (a lot of NTSC radio tuners probably need this change too). Add a new tuner-simple parameter, radio_if. It selects the 1st IF used for radio reception. The radio frequency setting code in tuner-simple now uses this field, instead of a special case select() block for each tuner with radio support. The tuner parameters for tuners that used a 33.3 MHz RIF now set radio_if to 1 in tuner-types.c. The Thomson DTT7612 gets radio_if = 2, also add has_tda9887 = 1 and fm_gain_normal = 1. Add some defines for tda9887 bits that control IF setting in radio mode. Add a new tda9887 config option, TDA9887_RIF_41_3, that selects a 41.3 MHz radio IF. Fix the way tda9887 radio options work. The driver was modifying the default radio mode config templates based on the TDA9887_XXXX flags. This means that _all_ tuners would get the same settings. If you had a one tuner than used TDA9887_GAIN_NORMAL and one that didn't, both would get the setting. Now the tda9987 driver just checks if tuner mode is radio and then applies the config settings directly to the data being sent, just like how all the TV mode settings already work. The PLL setting math is made a little more accurate. And a grammar error in a printk is fixed. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-08-03merge: http://linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-03ivtv: attach yuv field order to each frameHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> In the current driver, the field order is global. As soon as it's changed it takes immediate effect. This is a problem when the video changes order mid stream. Although it mostly works okay, the video may judder / flicker. This patch attaches the field order to the frame, so that any buffered frames will not be displayed until the correct field. In the event that the field order is changed mid stream, the driver will ensure that the previous frame is displayed for a minimum of 3 fields. These are the two original fields the frame should have occupied, plus the one extra since the new frame still has to wait for the correct field. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: prevent yuv register updates from being missedHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> The yuv output code always compares the new frame position & size with those of the previous frame. If they are different, a flag is set to request the yuv output registers be updated when the new frame is displayed. If the incoming frames are delivered too fast, exhausting the buffers, the most recent frame already buffered will be discarded. Unfortunately, any update request will also be discarded. If the new frame matches the size & position of the now discarded frame, the yuv registers are not flagged for update & will remain in their old state. This patch preserves the register update flag in the event that a frame is dropped. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv-fb: framebuffer timings no longer locked on module loadHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> Framebuffer timings are currently locked to the video format in use when the module is loaded. If the video format is then changed, the timings returned by the framebuffer will be for the original format. This patch ensures that the timings returned reflect the current video format. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: prevent vertical overflow of yuv outputHans Verkuil
From: Ian Armstrong <ian@iarmst.demon.co.uk> When the video standard is changed, there's no guarantee the framebuffer dimensions are still legal. The yuv output code uses these dimensions to calculate the size & position for the video overlay. If the framebuffer dimensions are now illegal, the output may exceed the vertical limit of the display, causing distortion. This patch adds an additional check to ensure the output doesn't exceed the limits for the current video standard, cropping if required. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-08-03ivtv: report ivtv version in status log.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-31cx8800: Add register debug functions to radio device tooTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Add the advanced debug functions to the radio videodev template. One could already use them from the video and vbi devices. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-31cx88: Wrong values used for HD-3000 radio modeTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> After some tedious work with a logic probe and a magnifying glass, I've determined that GPIO 7 is used to switch between the DTT7612's Sound 4.5 MHz IF output on pin 12 and the FM 10.7MHz If output on pin 11. GPIO 2 is used to switch the card's analog sound output from from the analog input connector to the CX23883's audio DACs. So, in radio mode GPIO2 = 1 and GPIO7 = 0. Add some comments about how the HD-3000's GPIOs are connected. Delete the vmux setting for the radio, as vmux doesn't apply to radio mode. Also delete the lines setting unused gpio words to zero; it's not necessary as 0 is the default value for uninitialized fields. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-31msp3400-driver.c: kmalloc + memset conversion to kzallocMauro Carvalho Chehab
From: Mariusz Kozlowski <m.kozlowski@tuxland.pl> drivers/media/video/msp3400-driver.c | 28945 -> 28898 (-47 bytes) drivers/media/video/msp3400-driver.o | 125620 -> 125320 (-300 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> CC: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-31ivtv: fix VIDIOC_S_FBUF support: new OSD values where never actually set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The values set with VIDIOC_S_FBUF were not actually used until the next VIDIOC_S_FMT. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-30include "compat.h" in v4l2-int-device.cMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> fix build with older kernels Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-30ivtv: fix semaphore / mutex compat for kernels 2.6.15 and earlierMichael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-30Export v4l2_int_device_{, un}registerMauro Carvalho Chehab
From: Adrian Bunk <bunk@stusta.de> This patch fixes the following build error: <-- snip --> ... MODPOST 2135 modules make[2]: *** [__modpost] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-28Stradis and zoran depend on virt_to_busMauro Carvalho Chehab
From: Stephen Rothwell <sfr@canb.auug.org.au> I assume that is why they were marked as !PPC64. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-27Add vp27smpx driverHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> This device is internal to the Panasonic VP27S tuner and is used to set the mono/stereo/bilingual setting of the tuner. It is used by two Japanese cx23416-based cards. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20tuner: fix TOP values for the Panasonic VP27 tuner.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv: set correct crystal frequency of the GVMVPRX cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-25ivtv-fb: initializing the framebuffer should trigger ivtv firmware loadHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-25Merge: from hg/~hverkuil/v4l-dvb2Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-23Clean up duplicate includes in drivers/media/Mauro Carvalho Chehab
From: Jesper Juhl <jesper.juhl@gmail.com> This patch cleans up duplicate includes in drivers/media/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23merge: http://www.linuxtv.org/hg/~hverkuil/ivtv-fbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-23usbvision: fix bugs [sg]_register functionsTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> s_register was assigning the return code to (unsigned)reg->val, rather than errCode, which it what it would return. Except reg->val can't be < 0, so it would never actually return an error. g_register never actually put the value it read into reg->val. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-22ivtv-fb: improve debug message.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv, cx25840: postpone fw load until first use.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The firmware is now loaded when the driver is actually used for the first time. This allows the driver to be compiled in-kernel instead of as a module. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: add missing composite input line for ivtv_pci_pg600v2 cards.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix incorrect fw size report.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: remove dead codeHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix TV-out VBI handling, only reset on last close.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> While decoding (MPEG or YUV) is active or when VBI output is in use, then do not clear the VBI output of the saa7127. Only after the last user is gone can we clear it. This fixes the case where playback was stopped, another channel was chosen and playback was restarted, while /dev/vbi16 was used to set the WSS (widescreen) setting. Without this fix the WSS was reset on every stop instead of just keeping the last value. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: improve mailbox responsiveness.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> First try polling for the result of a mailbox command, then switch to a test/sleep loop. Also reduce the sleep time from 10 ms to 1 ms. Improves the responsiveness of the mailbox handling. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: fix pause/continue/play handlingHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Pausing a decoder followed by a Play command would do nothing. Fixed. Pausing a decoder running at non-standard speed following by a Continue would reset the speed to 100%. Fixed. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-22ivtv: update version to 1.1 to mark ivtv-fb support.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-21bttv: Fix Viewcast Osprey 440 supportTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2007-07-21ivtv-fb: cleanups, prevent fw calls in some casesHans Verkuil
From: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Ian Armstrong <ian@iarmst.co.uk> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-21msp3400: fix compat for #include of <linux/freezer.h>Michael Krufky
From: Michael Krufky <mkrufky@linuxtv.org> only #include <linux/freezer.h> #if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
2007-07-20Merge: from masterHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2007-07-20ivtv-fb: replace HZ with msecs_to_jiffies.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-22 15:03:29 +0000