summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-02-08em28xx: Fix for em28xx audio startupDouglas Schilling Landgraf
From: Robert Krakora <rob.krakora@messagenetsystems.com> Essentially if a snd_em28xx_capture_trigger() stop followed by a snd_em28xx_capture_trigger() start would not yield any data because there was some logic put in with an adev->shutdown variable which did not seem warranted in my humble opinion. It would cause snd_em28xx_capture_trigger start never to start up the audio stream until the device was closed and reopened again. Upon re-opening the device adev->shutdown is reset and audio data would again flow. Priority: high Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx: Fix for em28xx memory leak and function renameDouglas Schilling Landgraf
From: Robert Krakora <rob.krakora@messagenetsystems.com> Fix for em28xx memory leak and function rename Priority: high Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-08em28xx: remove bad check (changeset a31c595188af)Douglas Schilling Landgraf
From: Douglas Schilling Landgraf <dougsland@redhat.com> Removed bad check. Thanks to Robert Krakora <rob.krakora@messagenetsystems.com> to report that. Priority: high Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
2009-02-07saa7146: convert saa7146 and mxb in particular to v4l2_subdev.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Modified mxb to load the i2c modules through v4l2_subdev. So no more probing. Modified tea6415c and tea6420 to use the standard routing ops to do the routing, rather than using private commands. Dropped the private commands from tda9840 (they were never used except during initialization of the module). Added saa7146 support for VIDIOC_DBG_G_CHIP_IDENT. Converted saa5246a and saa5249 to v4l2_subdev. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-07v4l2: prefill ident and revision from v4l2_dbg_chip_ident.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Drivers that implement this always have to set the ident and revision to V4L2_IDENT_NONE and 0. Do this in the v4l2 core so drivers don't have to do this. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-07ivtv: cleanup naming conventionsMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Use consistent naming for pci_dev, v4l2_device and video_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-06ivtv/cx18: fix g_fmt and try_fmt for raw videoMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> The raw video device didn't report the image size correctly. When setting a new image the image height has to be a multiple of 32 lines. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-09merge: http://linuxtv.org/hg/~awalls/cx18-sliced-vbiMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-09merge: http://linuxtv.org/hg/~awalls/cx18Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-08cx18: Finally get sliced VBI working - for 525 line 60 Hz systems at leastAndy Walls
From: Andy Walls <awalls@radix.net> Sliced VBI, in the manner that ivtv implements it as a separate data stream, now works for 525 line 60 Hz systems like NTSC-M. It may work for 625 line 50 Hz systems, but I have more engineering work to do, to verify it is operating properly. Sliced data insertion into the MPEG PS should be working, but is untested. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-07cx18: Process Raw VBI on a whole frame basis; fix VBI buffer sizeAndy Walls
From: Andy Walls <awalls@radix.net> The cx23418 appears to send Raw VBI buffers with a PTS on a per frame basis, not per field, so process Raw VBI on a whole frame basis and reduce some complexity. Fix VBI buffer size computation to handle a whole frame of Raw VBI for a 625 line system, which is the worst case and will work for 525 lines systems as well. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-06cx18: Fix sliced VBI PTS and fix artifacts in last raw line of fieldAndy Walls
From: Andy Walls <awalls@radix.net> Fixed an endianess problem with the collection of the PTS from the VBI buffer given to us by the encoder. Also extrapolated the last 12 bytes of the last line of each field, to remove artifacts created by removing the first 12 bytes of each field for raw VBI. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-06cx18: Use correct line counts per field in firmware API callAndy Walls
From: Andy Walls <awalls@radix.net> The driver was incorrectly setting 0 line counts in a firmware API call to set the maximum amount of lines per field. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-06cx18: Fixes for enforcing when Encoder Raw VBI params can be setAndy Walls
From: Andy Walls <awalls@radix.net> The Encoder will only allow the Raw VBI parameters, along with a number of other API parameters, to take effect when no analog captures are in progress. These parameters must be set before the first analog capture starts, be it MPEG, VBI, YUV, etc., and cannot be changed until the last one stops. It is not obvious to me what capture channel API parameters are shared and which ones must be set per capture channel, so set them all for every analog capture channel start up. This fixes the driver so that VBI capture can be started up after the MPEG capture is going. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-06gspca - sq905: New subdriver.Jean-Francois Moine
From: Adam Baker <linux@baker-net.org.uk> Add initial support for cameras based on the SQ Technologies SQ-905 chipset (USB ID 2770:9120) to V4L2 using the gspca infrastructure. Currently only supports one resolution and doesn't attempt to inform libv4l what image flipping options are needed. Priority: normal Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-06gspca - t613: Bad debug level when displaying the sensor type.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-06gspca - t613: Bad sensor name in kernel trace when 'other' sensor.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-05cx18: Fix VBI ioctl() handling and Raw/Sliced VBI state managementAndy Walls
From: Andy Walls <awalls@radix.net> More sliced VBI fixes to bring the cx18 driver closer to full V4L2 spec compliance for VBI and to get sliced VBI working better. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-05gspca - sonixj: Add autogain for ov7630/48 and vflip for ov7648.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-05gspca - sonixj: No vertical flip control for mt9v111.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-16merge: http://linuxtv.org/hg/~jfrancois/v4l-dvb/Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-14merge: v4l-dvbJean-Francois Moine
2009-02-13merge: v4l-dvbJean-Francois Moine
2009-02-12gspca - main: More checks of the device disconnection.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> - prevent application oops when the device is disconnected - wake up the application at disconnection time - check the disconnection in ioctl dqbuf and poll Priority: high Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-04gspca - main: Destroy the URBs at disconnection time.Jean-Francois Moine
From: Adam Baker <linux@baker-net.org.uk> If a device using the gspca framework is unplugged while it is still streaming then the call that is used to free the URBs that have been allocated occurs after the pointer it uses becomes invalid at the end of gspca_disconnect. Make another cleanup call in gspca_disconnect while the pointer is still valid (multiple calls are OK as destroy_urbs checks for pointers already being NULL. Priority: high Signed-off-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-02gspca - some drivers: Fix compilation warnings.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-02gspca - vc032x: Remove the vc0321 reset.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-02gspca - vc032x: Cleanup source, optimize and check i2c_write.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01cx18: Remove an unused spinlockAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-01cx18: Fix presentation timestamp (PTS) for VBI buffersAndy Walls
From: Andy Walls <awalls@radix.net> The old code from ivtv used a CX23415/6 PTS, which was simply left at 0 in the cx18 driver. Since the CX23418 gives us what I think is a PTS (or some other 90 kHz clock count) with each VBI buffer, this change has the cx18 driver use that as a PTS. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-12Added support for AVerMedia Cardbus Hybrid remote controlMauro Carvalho Chehab
From: Oldřich Jedlička <oldium.pro@seznam.cz> Added support for I2C device at address 0x40 and subaddress 0x0d/0x0b that provides remote control key reading support for AVerMedia Cardbus Hybrid card, possibly for other AVerMedia Cardbus cards. The I2C address 0x40 doesn't like the SAA7134's 0xfd quirk, so it was disabled. Signed-off-by: Oldřich Jedlička <oldium.pro@seznam.cz> [mchehab@redhat.com: CodingStyle fixes] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-12zoran: fix printk formatMauro Carvalho Chehab
From: Randy Dunlap <randy.dunlap@oracle.com> Fix printk format warning: drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-09tvp514x: try_count reaches 0, not -1Mauro Carvalho Chehab
From: Roel Kluin <roel.kluin@gmail.com> with while (try_count-- > 0) { ... } try_count reaches 0, not -1. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> CC: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-09V4L: Storage class should be before const qualifierMauro Carvalho Chehab
From: Tobias Klauser <tklauser@distanz.ch> The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> CC: Jean-Francois Moine <moinejf@free.fr> CC: Sakari Ailus <sakari.ailus@nokia.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-16merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ivtvMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-16ivtv: fix regression in get sliced vbi formatHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The new v4l2_subdev_call used s_fmt instead of g_fmt. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: Andy Walls <awalls@radix.net>
2009-02-14ivtv: fix decoder crash regressionHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The video_ioctl2 conversion of ivtv in kernel 2.6.27 introduced a bug causing decoder commands to crash. The decoder commands should have been handled from the video_ioctl2 default handler, ensuring correct mapping of the argument between user and kernel space. Unfortunately they ended up before the video_ioctl2 call, causing random crashes. Thanks to hannes@linus.priv.at for testing and helping me track down the cause! Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-02-01cx18: Fix coding style of a switch statement per checkpatch.plAndy Walls
From: Andy Walls <awalls@radix.net> Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-02-01gspca - vc032x: Bad revision for the webcam 041e:405b.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01gspca - sonixj: Adjust some exchanges with the sensor mt9v111.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> This patch also enables the autogain for the mt9v111. Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01gspca - sonixj: Simplify the probe of the sensors mi0360/mt9v111.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01gspca - sonixj: Specific gamma tables per sensor.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01gspca - sonixj: Sensor sp80708 added for webcam 0c45:6143.Jean-Francois Moine
From: Jean-Francois Moine <moinejf@free.fr> Priority: normal Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
2009-02-01merge: v4l-dvbJean-Francois Moine
2009-02-01merge: http://linuxtv.org/hg/~mkrufky/fixesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-02-01merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-31saa7134-core: loading saa7134-alsa is now the defaultMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Most boards nowadays supports saa7134-alsa. Even some of they doesn't have any option to wire an audio cable. So, lets load saa7134-alsa by default, if the board is not based on saa7130 and if saa7134-alsa is compiled. Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-31saa7134-core: remove oss option, since saa7134-oss doesn't exist anymoreMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-31saa7134-alsa: saa7130 doesn't support digital audioMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-30cx18: Clean-up and enable sliced VBI handlingAndy Walls
From: Andy Walls <awalls@radix.net> Removed legacy ivtv state variables, added comments, and cleaned up sliced VBI related code. Enabled sliced VBI. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 12:49:33 +0000