summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-06-14gspca_ov519: add support for the ov511 bridgehans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_ov519: add support for the ov511 bridge Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: Better default contrast for ov6630hans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> Hmm, another one with an extra if (life sucks) the default contrast really is no good for the ov6630, it isn't even high enough in full daylight, this gives the ov6630 a different initial value for a better out of the box experience. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: Fix 320x240 with ov7660 sensorhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> As reported on the ov51x-jpeg list, and as I can confirm with my own cam the ov7670 in 320x240 has a number of broken columns of pixels at the left of the picture. This was not present in the old driver as it always used 640x480 and did software downscaling (took me a while to figure that one out). The fix adds a sensor specific if in so far sensor neutral code :( But this is the only way to fix this, this cannot be fixed by only changing sensor registers. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: Fix led inversion with some camshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> My ov519 cam has it led inverted, the same has been reported on the ov51x-jpeg list for another creative cam. This patch fixes this without changing the behaviour for other cams. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: check ov518 packet numbershans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> Check ov518 packet numbers to detect dropped packets. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: Add 320x240 and 160x120 support for cif sensor camshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca_ov519: Add 320x240 and 160x120 support for cif sensor cams Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14gspca_ov519: limit ov6630 qvif uv swap fix to ov66308AFhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> The fix for the UV swapping in qcif mode with the ov6630, which I did to fix this issue on a ov518 cam with an ov66308AF, causes UV swapping in qcif with another cam of mine with the ov518 and an ov66308AE, so this patch changes the code to differentiate between the ov66308AF and other ov6630 versions, and restricts the UV swap fix to the ov66308AF. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-14ivtv/cx18: fix regression: class controls are no longer seenMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> A previous change (v4l2-common: remove v4l2_ctrl_query_fill_std) broke the handling of class controls in VIDIOC_QUERYCTRL. The MPEG class control was broken for all drivers that use the cx2341x module and the USER class control was broken for ivtv and cx18. This change adds back proper class control support. Priority: high Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-21merge: http://www.kernellabs.com/hg/~dheitmueller/em28xx-indtube2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-21merge: http://udev.netup.ru/hg/v4l-dvb-commitsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-20em28xx: add Remote control support for EVGA inDtubeDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Add an IR profile for the EVGA inDtube remote control (which is an NEC type remote) Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-06-20Kbuild: make USB_STV06XX compile with RHEL5 kernelsMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-19Create table for customize stv0900 ts registers.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-06-18em28xx: add support for EVGA inDtubeDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> Add support for the EVGA inDtube. Both ATSC and analog side validated as fully functional. Thanks to Jake Crimmins from EVGA for providing the correct GPIO info. Thanks to Alan Hagge for doing all the device testing. Thanks to Greg Williamson for providing hardware for testing. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Jake Crimmins <jcrimmins@evga.com> Cc: Alan Hagge <ahagge@gmail.com> Cc: Greg Williamson <cheeseboy16@gmail.com>
2009-06-18em28xx: make sure the analog GPIOs are set if we used a card hintDevin Heitmueller
From: Devin Heitmueller <dheitmueller@kernellabs.com> In cases where the board had a default USB ID, we would not indentify the board until after the call to em28xx_set_mode(). As a result, for those boards the analog GPIOs were not being set before probing the i2c bus for devices (the probe would occur with the GPIOs being all high). Make a call to em28xx_set_mode() so that the GPIOs are set properly before probing the i2c bus for devices. This problem was detected with the EVGA inDtube, where the tvp5150 is not powered on unless GPIO1 is pulled low. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
2009-06-17merge: http://linuxtv.org/hg/~tap/fixMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-17pxa-camera: fix typoTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> v4l2_bound_align_image should be v4l_bound_align_image. Change comment to match coding style. Should be merged with cb48209c1841 pxa-camera: Use v4l bounding/alignment function Priority: high Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-06-16cx88: Properly support Leadtek TV2000 XP GlobalMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Fix Leadtek TV2000 XP Global entries and add missing PCI ID's. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing us for the proper settings. Priority: normal CC: Terry Wu <terrywu2009@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16v4l2: Fix flaw in alignment codeTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> It's possible that the height alignment would be increased beyond the maximum possible value when trying to satisfy size alignment. Please fold with b4d3ec8d363d v4l2: Create helper function for bounding and aligning images Priority: high Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-06-16backport commit c2e5307b902426247afa48d3f1ed4fa5409dcb49Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Author: Valentin Longchamp <valentin.longchamp@epfl.ch> Date: Wed May 6 11:54:48 2009 +0200 mx31: changed CONSISTENT_DMA_SIZE to 8M for mx31 video Priority: normal Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16Backport language typo and whitespace differencesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16poll method lose race conditionMauro Carvalho Chehab
From: Figo.zhang <figo1802@gmail.com> bttv-driver.c,cx23885-video.c,cx88-video.c: poll method lose race condition for capture video. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-14gspca-ov519: add extra controlshans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> This patch adds autobrightness (so that it can be turned off to make the already present brightness control work) and light frequency filtering controls. The lightfreq control needed 2 different entries in the ctrls array, as the number of options differs depending on the sensor. Always one of the 2 entires is disabled ofcourse. Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-13gspca: fix NULL pointer deref in query_ctrlhans@rhel5-devel.localdomain
From: Hans de Goede <hdegoede@redhat.com> gspca: fix NULL pointer deref in query_ctrl Priority: normal Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2009-06-12v4l2: Move bounding code outside I2C ifdef blockMauro Carvalho Chehab
From: Trent Piepho <xyzzy@speakeasy.org> On Fri, 12 Jun 2009, Randy Dunlap wrote: > From: Randy Dunlap <randy.dunlap@oracle.com> > > Move v4l_bound_align_image() outside of an #ifdef CONFIG_I2C block > so that it is always built. Fixes a build error: clamp_align() should be moved as well, since it's only used by v4l_bound_align_image(). I'm attaching an alternate version that fixes this. Labeled the endif too. Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-12uvc: Fix for no return value check of uvc_ctrl_set() which calls ↵Mauro Carvalho Chehab
mutex_lock_interruptible() From: Robert Krakora <rob.krakora@messagenetsystems.com> Fix for no return value check of uvc_ctrl_set() which calls mutex_lock_interruptible(). Priority: normal Signed-off-by: Robert Krakora <rob.krakora@messagenetsystems.com> Acked-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-09se401: Fix coding styleMauro Carvalho Chehab
From: Alan Cox <alan@linux.intel.com> Having fixed the sprintfs I decided a quick clean wouldn't do any harm so it was actually easy to read in future. Priority: normal Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-09gspca - stv06xx: remove needless if check and gotoMauro Carvalho Chehab
From: Alexey Klimov <klimov.linux@gmail.com> Patch removes needless if check and goto. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Reviewed-by: Erik Andrén <erik.andren@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-14Change lnbh24 configure bits for NetUP card.Igor M. Liplianin
From: Igor M. Liplianin <liplianin@netup.ru> Signed-off-by: Igor M. Liplianin <liplianin@netup.ru>
2009-06-07saa7134: add support for AVerMedia M103 (f736)Mauro Carvalho Chehab
From: Barry Kitson <b.kitson@gmail.com> Add 1461:f736 to the list of identifiers corresponding to the SAA7134_BOARD_AVERMEDIA_M103 board. This patch adds support for a variant of the AVerMedia M103 MiniPCI DVB-T Hybrid card. Signed-off-by: Barry Kitson <b.kitson@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-06v4l2-device: fix incorrect kernel checkHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> i2c_unregister_device must be called on kernels >= 2.6.26, not just for kernels >= 2.6.29. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-06-09v4l2: add new s_config subdev ops and v4l2_i2c_new_subdev_cfg/board callsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Add a new s_config core ops call: this is called with the irq and platform data to be used to initialize the subdev. Added new v4l2_i2c_new_subdev_cfg and v4l2_i2c_new_subdev_board calls that allows you to pass these new arguments. The existing v4l2_i2c_new_subdev functions were modified to also call s_config. In the future the existing v4l2_i2c_new_subdev functions will be replaced by a single v4l2_i2c_new_subdev function similar to v4l2_i2c_new_subdev_cfg but without the irq and platform_data arguments. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-06-06merge: http://kernellabs.com/hg/~dheitmueller/misc-fixes-2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-06zr364xx.c: vfree does its own NULL checkMauro Carvalho Chehab
From: Figo.zhang <figo1802@gmail.com> vfree() does it's own NULL checking, no need for explicit check before calling it. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-05ivtv: Fix PCI directionMauro Carvalho Chehab
From: Alan Cox <alan@linux.intel.com> The ivtv stream buffers may be for receive or for send but the attached sg handle is always destined cpu->device. We flush it correctly but the allocation is wrongly done with the same type as the buffers. See bug: http://bugzilla.kernel.org/show_bug.cgi?id=13385 (Note this doesn't close the bug - it fixes the ivtv part and in turn the logging next shows up some rather alarming DMA sg list warnings in libata) Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-04V4L/pwc - use usb_interface as parent, not usb_deviceMauro Carvalho Chehab
From: Lennart Poettering <mzxreary@0pointer.de> The current code creates a sysfs device path where the video4linux device is child of the usb device itself instead of the interface it belongs to. That is evil and confuses udev. This patch does basically the same thing as Kay's similar patch for the ov511 driver: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=ce96d0a44a4f8d1bb3dc12b5e98cb688c1bc730d Signed-off-by: Lennart Poettering <mzxreary@0pointer.de> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-04Add missing __devexit_p()Mauro Carvalho Chehab
From: Jean Delvare <khali@linux-fr.org> Add missing __devexit_p() to several drivers. Also add a few missing __init, __devinit and __exit markers. These errors could result in build failures depending on the kernel configuration. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-03Partially backport changeset 5ec629d784adMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> By mistake, I've committed a changeset that it is not done yet together with a fix. Revert the broken part of the old changeset. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-03buf-core.c: add pointer checkMauro Carvalho Chehab
From: Figo.zhang <figo1802@gmail.com> add poiter check for videobuf_queue_core_init(). any guys who write a v4l driver, pass a NULL pointer or a non-inintial pointer to the first parameter such as videobuf_queue_sg_init() , it would be crashed. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-01tuner-xc3028: fix frequency offsetMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> The last changeset has an else missing, causing wrong frequencies for DTV6. Thanks to Terry Wu <terrywu2009@gmail.com> for pointing the issue. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-01merge: http://linuxtv.org/hg/~tap/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-01merge: http://linuxtv.org/hg/~awalls/cx18-av-coreMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-01merge: http://linuxtv.org/hg/~dougsland/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-05-30cx231xx: TRY_FMT should not actually set anythingTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> In the TRY_FMT handler the function get_scale() is called to find what the scaler hardware will produce for a requested size. The problem is that get_scale(struct cx231xx *dev, ..., unsigned int *vscale, unsigned int *hscale) saves the calculated scale values into both the pointer arguments and into dev's hscale and vscale fields. TRY_FMT shouldn't actually change anything in the device state. The code to in get_scale() that writes to dev->[hv]scale can just be deleted. In all cases when dev's fields should be modified, get_scale() was called with get_scale(dev, ..., &dev->hscale, &dev->vscale), so dev was getting updated anyway. This didn't actually cause a problem because nothing ever actually made use of the hscale and vscale fields. I changed cx231xx_resolution_set() to use those fields rather than re-calculate them with a call to get_scale(). Updating [hv]scale in cx231xx_resolution_set() isn't necessary because every call of cx231xx_resolution_set() was already preceded by a call to get_scale() or setting the [hv]scale fields, so they will be always be up-to-date w.r.t. width and height. Removing the call to get_scale() from cx231xx_resolution_set() allowed making get_scale() a static function, which is a good thing for something with such a short name. There is already another function with the same name in the em28xx driver, but that one is static. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-05-30em28xx: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. It appears that the em2800 can only scale by 50% or 100%, i.e. the only heights supported might be 240 and 480. In that case the old code would set any height other than 240 to 480. Request 240 get 240, but request 239 and then you get 480. Change it to round to the nearest supported value. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-05-30cx231xx: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> CC: Srinivasa Deevi <srinivasa.deevi@conexant.com>
2009-05-30mt9: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> CC: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2009-05-30cx23885: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-05-30w8968cf: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. The existing code was casting pointers to u32 and to unsigned int into pointers to u16. This could mess up if someone passed in an image size greater than 65,535 and on big-endian platforms it won't work at all. The existing bounding code would shrink an image if it was too big, but returned ERANGE if it was too small. The code will not shrink or expand as necessary. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
2009-05-30cx88: Use v4l bounding/alignment functionTrent Piepho
From: Trent Piepho <xyzzy@speakeasy.org> The v4l function has a better algorithm for aligning image size. Priority: normal Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-10 04:16:29 +0000