summaryrefslogtreecommitdiff
path: root/linux/drivers/media/video
AgeCommit message (Collapse)Author
2009-03-18v4l2-common: remove incorrect MODULE testHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> v4l2-common doesn't have to be a module for it to call request_module(). Just remove that test. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Thanks-to: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2009-03-18au0828-video: needs linux/version.h for in-kernel buildMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> kernel-sync: Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18merge: http://linuxtv.org/hg/~awalls/cx18Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18merge: http://linuxtv.org/hg/~dheitmueller/hvr950q-analog2Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18merge: http://udev.netup.ru/hg/v4l-dvb-netupMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18Bug fix in NetUP: restore high address lines in CIAbylay Ospan
From: Abylay Ospan <aospan@netup.ru> CI high address lines disappears due to wrong data type used. Patch to fix it. Signed-off-by: Abylay Ospan <aospan@netup.ru>
2009-03-15au0828: finish videodev/subdev conversionDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated attach_inform/detach_inform routines, and convert over the i2c calls to subdev calls. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the au0828 analog support. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15au8522: move the analog decoder source fileDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> As Mauro pointed out, for a given driver you cannot have one file in media/video and another in dvb/frontends. Until we have a better scheme for managing the source tree in terms of a single chip that has both a digital demod and an analog demod, make sure both files reside in the dvb/frontends dir. This patch is strictly a file move - there are no changes to the file itself. This change was required so that the code works in the mainline kernel (without it the code only compiles in the out-of-tree v4l-dvb branch). Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15au0828: rename macro for currently non-function VBI supportDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The VBI support or the au0828 has the framework written but it does not yet work. Rename the macro per Mauro's request. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15au0828/au8522: Codingstyle fixesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle issues. This patch does not make *any* functional change to the code. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15pvrusb2: Add composite and s-video input support for OnAir devicesMike Isely
From: Mike Isely <isely@pobox.com> Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-15au0828: add entry for undefined input typeDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> For the sake of completeness, include the "undefined" input type enumeration, even though there is no path that can actually call it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15au0828: remove some unneeded bracesDevin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> There were some braces left behind from when there was more code in the block. Remove it. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15au0828: remove memset calls in v4l2 routines.Devin Heitmueller
From: Devin Heitmueller <dheitmueller@linuxtv.org> The userland callers are responsible for clearing the output buffers, so remove the unneeded memset calls. Thanks to Mauro Carvalho Chehab <mchehab@infradead.org> for pointing this out. Priority: normal Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
2009-03-15saa7134: set v4l2_dev field of video_deviceMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> The v4l2_dev field of video_device wasn't initialized. The parent field is derived from v4l2_dev, so that doesn't need to be set anymore. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14cx18: Optimize processing of VBI buffers from the capture unitAndy Walls
From: Andy Walls <awalls@radix.net> Removed some unnecessary memcpy()'s by reworking the compress_*_vbi_buf() functions. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-03-14cx18, ivtv: Ensure endianess for linemasks in VBI embedded in MPEG streamAndy Walls
From: Andy Walls <awalls@radix.net> The sliced VBI payloads that cx18 and ivtv would insert in the MPEG stream did not have consistent endianess for the linemasks in the payload (a big endian platform would write them out big endian). This change ensures the linemasks are always stored as little-endian in the MPEG stream to ensure cross platform consistency in parsing the generated MPEG stream. Priority: normal Signed-off-by: Andy Walls <awalls@radix.net>
2009-03-14bt819: fix compile error for old kernels.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14v4l-dvb: replace remaining references to the old mailinglist.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14pvrusb2: Add sub-device for demodMike Isely
From: Mike Isely <isely@pobox.com> Forgot to include the tda9887 component when moving to v4l2-subdev. I got fooled because its name is "tuner", the same as the tuner module. Silly me. Priority: normal Signed-off-by: Mike Isely <isely@pobox.com>
2009-03-14zoran: fix incorrect return type of notify function.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14cx88: convert to v4l2_device.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14bttv: convert to v4l2_device.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14v4l2: call v4l2_device_disconnect in USB drivers.Mauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-14v4l2-device: add v4l2_device_disconnectMauro Carvalho Chehab
From: Hans Verkuil <hverkuil@xs4all.nl> Call v4l2_device_disconnect when the parent of a hotpluggable device disconnects. This ensures that you do not have a pointer to a device that is no longer present. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13Fix the issue with audio module & correction of NamesMauro Carvalho Chehab
From: Sri Deevi <Srinivasa.Deevi@conexant.com> The audio module requested in driver differs with module created by Makefile. Makefile is corrected to create the same module name required by driver. Also, corrected the strings that shows wrong name. Priority: normal Signed-off-by: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13Fix compilation with -git treeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Due to the out-of-tree and in-kernel -git tree, a few changes are required, in order to properly compile cx231xx with -git. kernel-sync: CC: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13merge: http://linuxtv.org/hg/~gliakhovetski/v4l-dvbMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-notifyMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13cx25840: cx23885 detection was brokenHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> An earlier commit accidentally broke the detection of the cx25837 part of the cx23885. Reinstated the commented out code. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-13v4l2-dev: use parent field if the v4l2_device has no parent set.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Normally the parent device of v4l2_device is used as the video device node's parent. But if it was not set, then use the parent field in the video_device struct. This is needed in the cx88 driver, which has one core v4l2_device but creates multiple pci devices (one each for raw and mpeg video). So you cannot associate the core v4l2_device with a particular PCI device, but you can do that for each video_device. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-13cx23885: fix crash on non-netup cardsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> The new support for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board broke the existing boards. Interrupts for the netup part were enabled and handled without testing whether the current board actually had a netup -> instant and fatal crash. I've added tests to do this only for the CX23885_BOARD_NETUP_DUAL_DVBS2_CI board. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
2009-03-13mr97310a: don't discard frame headers on stream outputMauro Carvalho Chehab
From: Theodore Kilgore <kilgota@auburn.edu> Fix a bug where all frame headers were being discarded, instead of being part of the stream output, on MR97310A cameras. The frame headers contain information which may be useful in processing the video output and therefore should be kept and not discarded. A corresponding patch to the decompression algorithm in libv4lconvert/mr97310a.c corrects the change in frame offset. Priority: high Signed-off-by: Theodore Kilgore <kilgota@auburn.edu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13mt9t031 bugfixGuennadi Liakhovetski
From: Philippe Rétornaz <philippe.retornaz@epfl.ch> - The video device is not allocated when mt9t031_init() is called, don't use it in debug printk. - The clock polarity is inverted in mt9t031_set_bus_param(), use the correct one. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9t031.c | 6 ++---- 1 files changed, 2 insertions(+), 4 deletions(-)
2009-03-13mt9v022: allow setting of bus width from board codeGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 7 -- drivers/media/video/mt9v022.c | 141 ++++++++++++----------------------------- 2 files changed, 42 insertions(+), 106 deletions(-)
2009-03-13mt9m001: allow setting of bus width from board codeGuennadi Liakhovetski
From: Sascha Hauer <s.hauer@pengutronix.de> This patch removes the phytec specific setting of the bus width and switches to the more generic query_bus_param/set_bus_param hooks Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/Kconfig | 7 -- drivers/media/video/mt9m001.c | 143 +++++++++++----------------------------- 2 files changed, 40 insertions(+), 110 deletions(-)
2009-03-13video: use videobuf_waiton() in sh_mobile_ceu free_buffer()Guennadi Liakhovetski
From: Magnus Damm <damm@igel.co.jp> Make sure videobuf_waiton() is used before freeing a buffer. Without this fix we may return the buffer to the allocator before the bus mastering operation is finished. Reported-by: Matthieu CASTET <matthieu.castet@parrot.com> Tested-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/sh_mobile_ceu_camera.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-)
2009-03-13ov772x: use soft sleep mode in stop_captureGuennadi Liakhovetski
From: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/ov772x.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-)
2009-03-13soc-camera: configure drivers with a default format at probe timeGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Currently soc-camera doesn't set up any image format without an explicit S_FMT. According to the API this should be supported, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch moves negotiating of available host-camera format translations to probe() time, and restores the state from the last close() on the next open(). This is needed for some drivers, which power down or reset hardware after the last user closes the interface. This patch also has a nice side-effect of avoiding multiple allocation anf freeing of format translation tables. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 39 ++++++++++++++++++++++--------------- include/media/soc_camera.h | 1 + 2 files changed, 24 insertions(+), 16 deletions(-)
2009-03-13sh-mobile-ceu-camera: set field to the value, configured at open()Guennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> For the case, that we have to capture with a default format, i.e., when the user doesn't call S_FMT, we have to use the field value according to the default, configured at open() time. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/sh_mobile_ceu_camera.c | 17 +++++++++-------- 1 files changed, 9 insertions(+), 8 deletions(-)
2009-03-13soc-camera: configure drivers with a default format on openGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Currently soc-camera doesn't set up any image format without an explicit S_FMT. It seems this should be supported, since, for example, capture-example.c from v4l2-apps by default doesn't issue an S_FMT. This patch configures a default image format on open(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/soc_camera.c | 100 ++++++++++++++++++++++++++------------ 1 files changed, 68 insertions(+), 32 deletions(-)
2009-03-13soc-camera: separate S_FMT and S_CROP operationsGuennadi Liakhovetski
From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> As host and camera drivers become more complex, differences between S_FMT and S_CROP functionality grow, this patch separates them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> --- drivers/media/video/mt9m001.c | 19 +++- drivers/media/video/mt9m111.c | 56 +++++++--- drivers/media/video/mt9t031.c | 84 ++++++++++------ drivers/media/video/mt9v022.c | 62 +++++++---- drivers/media/video/mx3_camera.c | 157 +++++++++++++++++----------- drivers/media/video/ov772x.c | 31 +++++- drivers/media/video/pxa_camera.c | 67 +++++++++--- drivers/media/video/sh_mobile_ceu_camera.c | 17 ++- drivers/media/video/soc_camera.c | 20 ++-- drivers/media/video/soc_camera_platform.c | 9 ++- drivers/media/video/tw9910.c | 45 +++++--- include/media/soc_camera.h | 6 +- 12 files changed, 381 insertions(+), 192 deletions(-)
2009-03-13Add support for ProVideo PV-183 to bttvMauro Carvalho Chehab
From: Alan McIvor <alan.mcivor@reveal.co.nz> Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Priority: normal Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-20merge: http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-cafeMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19au8522/au0828: Fix Kconfig dependenciesMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> au8522 is now dependent of V4L2, as reported by Randy Dunlap <randy.dunlap@oracle.com>: au8522_decoder.c:(.text+0x199898): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x1998b3): undefined reference to `v4l2_ctrl_query_fill' au8522_decoder.c:(.text+0x199944): undefined reference to `v4l2_device_unregister_subdev' au8522_decoder.c:(.text+0x19997c): undefined reference to `v4l2_chip_ident_i2c_client' au8522_decoder.c:(.text+0x199f1e): undefined reference to `v4l2_i2c_subdev_init' Priority: normal CC: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-19au0828: Fix compilation when VIDEO_ADV_DEBUG = nMauro Carvalho Chehab
From: Mauro Carvalho Chehab <mchehab@redhat.com> As reported by Kyle McMartin and Randy Dunlap: drivers/media/video/au0828/au0828-video.c:1438: error: 'const struct v4l2_subdev_core_ops' has no member named 'g_register' drivers/media/video/au0828/au0828-video.c:1453: error: 'const struct v4l2_subdev_core_ops' has no member named 's_register' This patch properly implements those two API ioctls only when debug is enabled. Priority: normal CC: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-18cafe_ccic: stick in a comment with a request for test resultsHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Due to lack of hardware this conversion to v4l2_device/v4l2_subdev is untested. If all goes well I should be able to test it in about a month, but just in case I can't manage that it should be made clear in the code that this isn't tested. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2009-03-18cafe_ccic: replace debugfs with g/s_register ioctls.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Using VIDIOC_DBG_S/G_REGISTER is the standard way of reading/writing register for advanced debugging under v4l2. In addition, using this means that the cafe_ccic driver doesn't need to have knowledge about the used sensor: the debug ioctl can be passed on to the sensor if it isn't for the host. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18ov7670: add support to get/set registersHans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
2009-03-18ov7670: cleanup and remove legacy code.Hans Verkuil
From: Hans Verkuil <hverkuil@xs4all.nl> v4l2-i2c-drv-legacy.h and ov7670_command are no longer needed after the cafe driver is converted to use v4l2_subdev. Rather than using a large ov7670_control array, just call the handlers via a simple switch and use v4l2_ctrl_query_fill() to handle queryctrl. Priority: normal Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Jonathan Corbet <corbet@lwn.net>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-08 10:07:23 +0000