| Age | Commit message (Collapse) | Author |
|---|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Since:
1) FW_LOADER is defined as:
config FW_LOADER
tristate "Userspace firmware loading support"
depends on HOTPLUG
2) several V4L/DVB driver just selects it;
3) select is not smart enough to auto-select HOTPLUG, if select FW_LOADER.
So, All drivers that select FW_LOADER should also depend on HOTPLUG.
An easier solution (for the end-user perspective) would be to "select HOTPLUG".
However, live is not simple. This would cause recursive dependency issues like
this one:
drivers/usb/Kconfig:62:error: found recursive dependency: USB -> USB_OHCI_HCD
-> I2C -> MEDIA_TUNER -> MEDIA_TUNER_XC2028 -> HOTPLUG -> PCCARD -> PCMCIA ->
USB_ARCH_HAS_HCD -> MOUSE_APPLETOUCH -> USB
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
cx88 doesn't need support for FW_LOADER. Instead, this is required only for
cx88-blackbird.
Also, cx88-blackbird depends on HOTPLUG, due to FW_LOADER dependency.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
em28xx-dvb doesn't need FW_LOADER. Instead, tuner-xc2028 needs to select
FW_LOADER.
Also, this can happen only if HOTPLUG is selected, since FW_LOADER
is dependent on HOTPLUG.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the
previous behaviour before the creation of MEDIA_TUNER.
Before this patch, tuner.ko were created even for drivers that don't need a
tuner (like webcam drivers).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Randy Dunlap <randy.dunlap@oracle.com>
Fix undefined references in au0828:
depends on USB and select VIDEO_TVEEPROM
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Ingo Molnar <mingo@elte.hu>
x86.git testing found the following build failure in v2.6.26-rc1:
MODPOST 424 modules
ERROR: "tveeprom_hauppauge_analog" [drivers/media/video/au0828/au0828.ko] undefined!
ERROR: "tveeprom_read" [drivers/media/video/au0828/au0828.ko] undefined!
with this config:
http://redhat.com/~mingo/misc/config-Sat_May__3_22_28_58_CEST_2008.bad
this patch does what other video drivers do to utilize the
VIDEO_TVEEPROM functionality (and this resolves the build problem) - but
i have not checked it on real hardware and i have not checked whether
the fix is complete.
selections, so some items might still be missing - just not triggered
with this specific config.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
The cx23885 driver used to use dvb-pll for LG-TDVS-H064F support on the
FusionHDTV5 Express. This has since been converted to use tuner-simple
instead, once digital tuning support was added to tuner-simple.
Since cx23885 no longer uses dvb-pll, remove the #include "dvb-pll.h",
and the DVB_PLL Kconfig selection.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Denis V. Lunev <den@openvz.org>
Date: Tue Apr 29 01:02:35 2008 -0700
drivers: use non-racy method for proc entries creation (2)
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Harvey Harrison <harvey.harrison@gmail.com>
Date: Wed Apr 30 00:54:55 2008 -0700
Add macros similar to min/max/min_t/max_t
Also, change the variable names used in the min/max macros to avoid shadowed
variable warnings when min/max min_t/max_t are nested.
Small formatting changes to make all the macros have a similar form.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix v4l build]
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Nick Piggin <npiggin@suse.de>
Date: Mon Apr 28 02:12:10 2008 -0700
mm: remove nopage
Nothing in the tree uses nopage any more. Remove support for it in the
core mm code and documentation (and a few stray references to it in
comments).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
kernel-sync:
Author: Harvey Harrison <harvey.harrison@gmail.com>
Date: Mon Apr 28 16:50:03 2008 -0700
media: fix integer as NULL pointer warnings
drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer
drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer
drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer
drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer
drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer
drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Mauro Carvalho Chehab <mchehab@infradead.org>
LD drivers/media/video/built-in.o
drivers/media/video/cx18/built-in.o: In function `get_service_set':
/home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:118: multiple definition of `get_service_set'
drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:119: first defined here
drivers/media/video/cx18/built-in.o: In function `expand_service_set':
/home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:92: multiple definition of `expand_service_set'
drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:92: first defined here
drivers/media/video/cx18/built-in.o: In function `service2vbi':
/home/v4l/tokernel/git/drivers/media/video/cx18/cx18-ioctl.c:44: multiple definition of `service2vbi'
drivers/media/video/ivtv/built-in.o:/home/v4l/tokernel/git/drivers/media/video/ivtv/ivtv-ioctl.c:42: first defined here
make[2]: ** [drivers/media/video/built-in.o] Erro 1
make[1]: ** [drivers/media/video] Erro 2
make: ** [drivers/media/] Erro 2
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Jean Delvare <khali@linux-fr.org>
Date: Tue Apr 29 23:11:39 2008 +0200
i2c: Add support for device alias names
Based on earlier work by Jon Smirl and Jochen Friedrich.
This patch allows new-style i2c chip drivers to have alias names using
the official kernel aliasing system and MODULE_DEVICE_TABLE(). At this
point, the old i2c driver binding scheme (driver_name/type) is still
supported.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Author: Jean Delvare <khali@linux-fr.org>
Date: Tue Apr 29 23:11:40 2008 +0200
i2c: Convert most new-style drivers to use module aliasing
Based on earlier work by Jon Smirl and Jochen Friedrich.
Update most new-style i2c drivers to use standard module aliasing
instead of the old driver_name/type driver matching scheme. I've
left the video drivers apart (except for SoC camera drivers) as
they're a bit more diffcult to deal with, they'll have their own
patch later.
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
This driver uses some sysfs helper functions that are available only for legacy
drivers. It also requires linux/mm.h.
This patch fixes compiliation when not in compat mode.
Thanks to Ingo Molnar for identifying this issue.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Thanks to Ingo Molnar for finding this.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
As pointed by Andrew Morton, the error testing were wrong. After reviewing
tea5767, it were returning a positive value for errors.
So, the double errors were cancelling each other.
This patch fix it properly. It also considers any positive value as ok, on
tuner-core.
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
As reported by Mike Galbraith <efault@gmx.de>:
[ 13.666587] TUNER: Unable to find symbol tda829x_probe()
[ 13.674638] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[ 13.691175] DVB: Unable to find symbol tda9887_attach()
[ 13.698968] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 13.709509] IP: [<ffffffff80302934>] strlcpy+0x11/0x36
[ 13.711135] PGD be167067 PUD be140067 PMD 0
[ 13.711137] Oops: 0000 [1] SMP
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Before this patch, an error at tuner or diseqc were discarded by the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Andrew Morton <akpm@linux-foundation.org>
Because it goes BUG.
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
Both mt9v022 and mt9m001 cameras are controlled over the I2C bus.
Respectively, their drivers require I2C to be built successfully.
Thanks to Ingo Molnar for reporting the build-breakage.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
soc_camera doesn't depend on i2c, individual drivers might.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Auto generated by this script:
for i in `find drivers/media/ -name Kconfig`; do
cat $i |\
sed s,DVB_CORE_ATTACH,MEDIA_ATTACH,g |\
sed s,VIDEO_TUNER,MEDIA_TUNER,g |\
sed s,TUNER_SIMPLE,MEDIA_TUNER_SIMPLE,g |\
sed s,TUNER_TDA8290,MEDIA_TUNER_TDA8290,g |\
sed s,DVB_TDA827X,MEDIA_TUNER_TDA827X,g |\
sed s,DVB_TDA18271,MEDIA_TUNER_TDA18271,g |\
sed s,TUNER_TDA9887,MEDIA_TUNER_TDA9887,g |\
sed s,TUNER_TEA5761,MEDIA_TUNER_TEA5761,g |\
sed s,TUNER_TEA5767,MEDIA_TUNER_TEA5767,g |\
sed s,TUNER_MT20XX,MEDIA_TUNER_MT20XX,g |\
sed s,DVB_TUNER_MT2060,MEDIA_TUNER_MT2060,g |\
sed s,DVB_TUNER_MT2266,MEDIA_TUNER_MT2266,g |\
sed s,DVB_TUNER_MT2131,MEDIA_TUNER_MT2131,g |\
sed s,DVB_TUNER_QT1010,MEDIA_TUNER_QT1010,g |\
sed s,TUNER_XC2028,MEDIA_TUNER_XC2028,g |\
sed s,DVB_TUNER_XC5000,MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$
mv /tmp/temp_mv$$ $i
done
for i in `find drivers/media/ -type f`; do
cat $i |\
sed s,CONFIG_DVB_CORE_ATTACH,CONFIG_MEDIA_ATTACH,g |\
sed s,CONFIG_VIDEO_TUNER,CONFIG_MEDIA_TUNER,g |\
sed s,CONFIG_TUNER_SIMPLE,CONFIG_MEDIA_TUNER_SIMPLE,g |\
sed s,CONFIG_TUNER_TDA8290,CONFIG_MEDIA_TUNER_TDA8290,g |\
sed s,CONFIG_DVB_TDA827X,CONFIG_MEDIA_TUNER_TDA827X,g |\
sed s,CONFIG_DVB_TDA18271,CONFIG_MEDIA_TUNER_TDA18271,g |\
sed s,CONFIG_TUNER_TDA9887,CONFIG_MEDIA_TUNER_TDA9887,g |\
sed s,CONFIG_TUNER_TEA5761,CONFIG_MEDIA_TUNER_TEA5761,g |\
sed s,CONFIG_TUNER_TEA5767,CONFIG_MEDIA_TUNER_TEA5767,g |\
sed s,CONFIG_TUNER_MT20XX,CONFIG_MEDIA_TUNER_MT20XX,g |\
sed s,CONFIG_DVB_TUNER_MT2060,CONFIG_MEDIA_TUNER_MT2060,g |\
sed s,CONFIG_DVB_TUNER_MT2266,CONFIG_MEDIA_TUNER_MT2266,g |\
sed s,CONFIG_DVB_TUNER_MT2131,CONFIG_MEDIA_TUNER_MT2131,g |\
sed s,CONFIG_DVB_TUNER_QT1010,CONFIG_MEDIA_TUNER_QT1010,g |\
sed s,CONFIG_TUNER_XC2028,CONFIG_MEDIA_TUNER_XC2028,g |\
sed s,CONFIG_DVB_TUNER_XC5000,CONFIG_MEDIA_TUNER_XC5000,g >/tmp/temp_mv$$
mv /tmp/temp_mv$$ $i
done
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Due to the feedback I got, I've changed the -git patch. This needs to be
reflected also at -hg tree.
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
drivers/media/video/cx88/cx88-i2c.c: In function 'attach_inform':
drivers/media/video/cx88/cx88-i2c.c:102: warning: unused variable 'tun_setup'
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Many thanks to Steve Toth from Hauppauge and Nattu Dakshinamurthy from
Conexant for their support. I am in particular thankful to Hauppauge
since without their help this driver would not exist. It should also
be noted that Steve did the work to get the DVB part up and running.
Thank you!
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: G. Andrew Walls <awalls@radix.net>
|
|
From: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This patch makes the needlessly global mt9{m001,v022}_controls[] static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---
drivers/media/video/mt9m001.c | 2 +-
drivers/media/video/mt9v022.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
d7560162fe24391e091574b08b25ac124369fb7b diff --git a/linux/drivers/media/video/mt9m001.c b/linux/drivers/media/video/mt9m001.c
index 3fb5f63..04864cf 100644
|
|
From: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
From: Ingo Molnar <mingo@elte.hu>
on latest -git, with this config:
http://redhat.com/~mingo/misc/config-Mon_Apr_28_13_25_34_CEST_2008.bad
CONFIG_SOC_CAMERA_MT9M001=y
CONFIG_SOC_CAMERA_MT9V022=y
# CONFIG_I2C is not set
the build fails:
drivers/built-in.o: In function `reg_read':
mt9m001.c:(.text+0x140a87): undefined reference to `i2c_smbus_read_word_data'
drivers/built-in.o: In function `reg_write':
mt9m001.c:(.text+0x140b6e): undefined reference to `i2c_smbus_write_word_data'
drivers/built-in.o: In function `reg_read':
mt9v022.c:(.text+0x1413a7): undefined reference to `i2c_smbus_read_word_data'
drivers/built-in.o: In function `reg_write':
mt9v022.c:(.text+0x1414ce): undefined reference to `i2c_smbus_write_word_data'
drivers/built-in.o: In function `mt9m001_mod_init':
mt9m001.c:(.init.text+0x158a8): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `mt9v022_mod_init':
mt9v022.c:(.init.text+0x158b8): undefined reference to `i2c_register_driver'
drivers/built-in.o: In function `mt9m001_mod_exit':
mt9m001.c:(.exit.text+0x1656): undefined reference to `i2c_del_driver'
drivers/built-in.o: In function `mt9v022_mod_exit':
mt9v022.c:(.exit.text+0x1666): undefined reference to `i2c_del_driver'
adding the missing I2C dependency fixes it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mike Isely <isely@pobox.com>
This driver has been in-kernel and reasonably stable for well over a
year. It is in a stable form and is known to work well. Remove its
experimental status.
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
This was a build option in the past, to avoid conflicts with the cxusb module
for digital televsion support. Now that dtv mode support has been merged into
pvrusb2, the OnAir devices are fully supported by this single module. This no
longer should be a build option.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
|
|
From: Michael Krufky <mkrufky@linuxtv.org>
Get rid of the noise in dmesg during dvb feed changes,
unless the appropriate debug trace flag is enabled.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Reviewed-by: Mike Isely <isely@pobox.com>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
I and Brandon did similar patches. As Brandon patch where older, I've preserved
his patch at -git. However, the patches weren't equal.
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Jeff Garzik <jgarzik@redhat.com>
[ALSA] Fix synchronize_irq() bugs, redundancies
free_irq() calls synchronize_irq() for you, so there is no need for
drivers to manually do the same thing (again). Thus, calls where
sync-irq immediately precedes free-irq can be simplified.
However, during this audit several bugs were noticed, where free-irq is
preceded by a "irq >= 0" check... but the sync-irq call is not covered
by the same check.
So, where sync-irq could not be eliminated completely, the missing check
was added.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Author: Matthew Wilcox <matthew@wil.cx>
drivers: Remove unnecessary inclusions of asm/semaphore.h
None of these files use any of the functionality promised by
asm/semaphore.h. It's possible that they rely on it dragging in some
unrelated header file, but I can't build all these files, so we'll have
fix any build failures as they come up.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
From: Mauro Carvalho Chehab <mchehab@infradead.org>
kernel-sync:
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
|
